GMC C15 Suspension Parts

Essential GMC C15 Suspension Parts

MOOG – Leaf Spring Shackle Bushing (Part No.SB335)

Leaf Spring Shackle Bushing

from

$30.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Monroe – Max-Air Air Adjustable Air Shock Absorber, Pack of 2 (Part No.MA743)

Max-Air Air Adjustable Air Shock Absorber, Pack of 2

from

$188.99
Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
  • Upper Mount Type: Loop Bushing and Cantilever Pin Mount – 5/8″ Stud Diameter X 1 5/16″ Stud Length (Center of Loop to Frame)
See More

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

MOOG – Suspension Control Arm Bumper (Part No.K6607)

Suspension Control Arm Bumper

from

$13.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Loose or worn chassis parts can lead to premature tire wear
  • Incorporates proven design and engineering features
See More

Energy Suspension – Shackle Eye Set (Part No.3.2126R)

Shackle Eye Set

from

$23.99
Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Hellwig – Leaf Spring Design, Rear Upper, 2500 Lb Load Capacity, Steel (Part No.61912)

Leaf Spring Design, Rear Upper, 2500 Lb Load Capacity, Steel

from

$629.99
it is Patented Bolt-on Design, silent Ride Polyurethane Stability Blocks, Plated And Powder Coated Components And Easy To Follow Installation Instructions Make This The Helper Spring Of Choice For Do It Yourself And Professionals Alike. Manufactured With Heat Treated Alloy Spring Steel In Our California Based Facility, These Units Increase Your Vehicles Level Load Carrying Capacity Up To The manufacturer Gross Vehicle Weight Rating. With Its Progressive Rate Design This Helper Spring System Enables Trucks And Vans To Carry Loads With More Control And Stability. As Your Load Increases This Spring Automatically Increases Its Rate To Resist Sagging And Tail Dragging.

Product Features:
  • Manufactured With Heat Treated Alloy Spring Steel
  • 2500 Pounds Level Load Capacity
  • Progressive Rate Leaves Do Not Effect The Ride When Unloaded
  • Never Needs Adjusting
  • Silent Ride, With Unique Polyurethane Block Applies Tension To The U-bolts To Maintain A Quiet Ride, Also Stabilizes The Helper Spring In Reverse Or Rebound Mode
  • Heavy-duty Hardware
  • Simple Bolt-on Installation
See More

Rancho – Suspension Shock Absorber RS9000XL (Part No.RS999120)

Suspension Shock Absorber RS9000XL

from

$141.99
Get premium control and performance with Rancho RS9000XL shocks. Recognized as the first nine-position manually adjustable ride control series in the off-road market, RS9000XL shocks are ideal for on-road and off-road use, towing and more.

Product Features:
  • NINE LEVELS OF PERFORMANCE – Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
  • DESIGNED FOR HARDWORKING VEHICLES – Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
  • INDUSTRY FIRST – Recognized as the first nine-position manually adjustable shock series in the off-road market
  • REDUCES FADE – Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
  • STRONG AND DURABLE – Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
  • HANDLES EXTREME TEMPERATURE CHANGES – Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation.
  • SMOOTH PERFORMANCE – Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
  • BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life
  • BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
See More

Belltech – 1/2 Inch Lift, Rubber Bushing, Set Of 2 (Part No.6404)

1/2 Inch Lift, Rubber Bushing, Set Of 2

from

$146.99
By Engineering bracketry or replacement components Belltech Shackles and Hangers to reposition the front and/or rear Leaf Spring mounting points Spring eyes you can simply and effectively lower your Leaf Spring equipped sport truck or SUV without changing the factory Leaf Spring. This allows you to retain OEM Ride Quality and possibly more importantly factory load capacity. At Belltech, we offer both Belltech Shackles and Hangers as individual components as well as complete kits depending on your Lowering requirements. Belltech Shackle kits are designed drop the rear of your sport truck or SUV up to 2 Inches. For some applications we also offer a 1/2 Inch lifting Shackle kits. Belltech Shackle kits are constructed from Heavy Gauge die stamped P and O Steel to insure a perfect fit and superior quality. All Shackles are powder coated and feature OEM quality silent bloc rubber bushings and that do not need maintenance unlike polyurethane

Product Features:
  • To Reposition The Front And/Or Rear Leaf Spring Mounting Points Spring Eyes You Can Simply And Effectively Lower Your Leaf Spring Equipped Sport Truck Or SUV Without Changing The Factory Leaf Spring
  • This Allows You To Retain OEM Ride Quality And Possibly More Importantly Factory Load Capacity
  • Belltech Shackle Kits Are Designed Drop The Rear Of Your Sport Truck Or SUV Up To 2 Inches
  • For Some Applications We Also Offer A 1/2 Inch Lifting Shackle Kits
  • Belltech Shackle Kits Are Constructed From Heavy Gauge Die Stamped P And O Steel To Insure A Perfect Fit And Superior Quality
  • All Shackles Are Powder Coated And Feature OEM Quality Silent Bloc Rubber Bushings And That Do Not Need Maintenance Unlike Polyurethane
See More

MOOG – Coil Spring Set (Part No.6452)

Coil Spring Set

from

$167.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Monroe – Rear Suspension Shock Absorber Air Hose Kit (Part No.AK64)

Rear Suspension Shock Absorber Air Hose Kit

from

$25.99
Monroe is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Energy Suspension – Hyper-Flex System (Part No.3.18109R)

Hyper-Flex System

from

$377.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Rare Parts – Control Arm Shaft Kit (Part No.RP16612)

Control Arm Shaft Kit

from

$199.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Complete kit for 1 arm
  • Heat treated steel bushings OR torsional rubber bushings
  • Reduces vibration
See More

Monroe – Load Adjusting Front Suspension Shock Absorber and Coil Spring Assembly, Pack of 2 (Part No.58241)

Load Adjusting Front Suspension Shock Absorber and Coil Spring Assembly, Pack of 2

from

$138.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD – Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING – Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • Upper Mount Type: Loop Bushing and Cantilever Pin Mount – 1/2″ Stud Diameter X 1 5/16″ Stud Length (Center of Loop to Frame)
See More

MOOG – Suspension Control Arm Bushing Kit (Part No.K6137)

Suspension Control Arm Bushing Kit

from

$38.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Metal rib design helps lock the inner tube within frame pocket
  • Metal surfaces are phosphate coated for corrosion protection
See More

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

Shock-Mate Suspension Shock Absorber Bellows

from

$26.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$253.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102R)

Control Arm Bump Stop Set

from

$11.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

MOOG – Coil Spring Set (Part No.6454)

Coil Spring Set

from

$185.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Belltech – 6"Rear Drop, With C-Notch Frame Brackets/Spring Seats/U Bolts/Bump Stop/Hardware (Part No.6850)

6"Rear Drop, With C-Notch Frame Brackets/Spring Seats/U Bolts/Bump Stop/Hardware

from

$457.99
Belltech flip kits are the leading standard in the industry. When a mild drop is just not enough, Belltech can bring the heat. Belltech flip kits provide dramatic Lowering on the rear of your sport truck or SUV by relocating the rear axle of your truck from under to on top of the Leaf Spring.

Product Features:
  • Belltech Flip Kits Provide Dramatic Lowering On The Rear Of Your Sport Truck Or SUV By Relocating The Rear Axle Of Your Truck From Under To On Top Of The Leaf Spring
  • Kits Are Bulletproof Over Engineered Frame Modification And Reinforcement Systems That Allow For Additional Compression Or Upward Travel Of Your Rear Suspension, Essential In Limiting Bottoming Out
  • All Belltech C-Section Kits Are Manufactured With Heavy Duty Stamped Steel Contoured To Match The Factory Frame Rails
  • All Kits Feature A Durable Powder Coat Finish And The Highest Quality Hardware Using Grade 8 Fasteners
  • Belltech C-Sections Are Designed To Increase Overall Suspension Travel On Vehicles Utilizing Lowering Kits That Create Limited Rear Axle Travel
See More

Dorman – Suspension Leaf Spring (Part No.22-605)

Suspension Leaf Spring

from

$747.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:
  • Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
  • Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
  • Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
  • Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
  • Durable design – rigorously engineered and carefully manufactured to provide like-new feel and dependable service life
See More

Dorman – Suspension Leaf Spring (Part No.22-547)

Suspension Leaf Spring

from

$492.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:
  • Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
  • Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
  • Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
  • Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
See More

Dorman – Suspension Leaf Spring (Part No.22-547HD)

Suspension Leaf Spring

from

$520.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:
  • Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
  • Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
  • Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
  • Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
See More

KYB – High Pressure Monotube Gas Shock (Part No.565036)

High Pressure Monotube Gas Shock

from

$111.99
Tough conditions demand tough truck shocks. The large bore KYB MonoMax provides the additional stability that heavier, more powerful or high center of gravity vehicles demand. The KYB MonoMax is a heavy duty monotube shock absorber that provides the most handling, control and durability of any KYB shock; and its just for trucks. The MonoMaxs tough design automatically adjusts to driving conditions with fade-free performance. The KYB MonoMax has an outstanding reputation for vehicles that do real work, go off-road, tow a trailer or haul heavy loads. It uses a work-ready, zinc-coated steel piston ring and includes an off-road dust boot.

Product Features:
  • Maximum Performance Upgrade With Up To 40% More Damping Performance Than Standard Shock Absorbers
  • Perfect Solution When You Need To Upgrade Suspension Performance On Your Gm Truck
  • Truck Monotube Design Outperforms All Other Standard Shock Absorbers
  • Zinc-Coated, Stainless Steel Piston Ring Provides A Positive Seal In The Most Extreme Conditions
  • Rubber Boot To Protect The Shaft And Keep Dirt And Debris Away From The Seals
See More

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34824)

Gas-Magnum Suspension Shock Absorber

from

$91.99
Designed for midsize and full-size trucks and vans, Monroe Gas-Magnum shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:
  • DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
  • BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
  • CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
  • BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Monroe – OESpectrum Suspension Shock Absorber (Part No.37041)

OESpectrum Suspension Shock Absorber

from

$78.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
  • 5/8-inch (15.9 mm) diameter piston rod (On most applications)
See More

Helping You Find the Right Suspension Parts for Your GMC C15

You love your C15. So we’ve made it easier than ever to help you find GMC C15 Suspension Parts in our online catalog. Our inventory holds 60 aftermarket and OEM Suspension Parts for your GMC C15, ranging from $10.99 to $747.99.

We offer parts from 13 brands trusted to make quality Suspension Parts for your GMC C15. Before you buy, take some time to read through customer reviews. We currently have 5,152 reviews of GMC C15 Suspension Parts from previous customers. Some of the top rated parts include Gas-Matic LT Suspension Shock Absorber with 4.6 stars and Leaf Spring Shackle Bushing with 2.8 stars.

Find your C15 Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC C15 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Suspension Parts Brands for Your GMC C15

Our inventory holds Suspension Parts for your GMC C15 from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Monroe, and Moog, all of which can keep that GMC happy.
We have Driveworks parts available for your GMC C15 in categories like Control Arms. Some of the top-rated Driveworks parts in these categories are:
Control Arm Bushing
from $16.49
(13)
Control Arm Bushing
Lower Control Arm Bushings
Control Arm Bushing
from $14.99
(8)
Control Arm Bushing
Lower Control Arm Bushings

FAQs for GMC C15 Suspension Parts

What are the most purchased Suspension Parts for the GMC C15?

Out of 60 Suspension Parts for the GMC C15, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Suspension Self-Leveling Unit Fluids
Gas-Matic LT Suspension Shock Absorber
from $41.99
(6)
Gas-Matic LT Suspension Shock Absorber
Rear Shock and Struts
Gas-Matic Suspension Shock Absorber
from $53.99
(12)
Gas-Matic Suspension Shock Absorber
Rear Shock and Struts

What are the top-rated GMC C15 Suspension Parts?

Top-rated Suspension Parts for your GMC C15 based on customer reviews/ratings are:
Gas-Matic LT Suspension Shock Absorber
from $43.99
(9)
Gas-Matic LT Suspension Shock Absorber
“stiffend up my suspention very nice”
Leaf Spring Shackle Bushing
from $30.49
(6)
Leaf Spring Shackle Bushing
“Just what I needed”
Rear Suspension Shock Absorber Air Hose Kit
from $25.99
(5)
Rear Suspension Shock Absorber Air Hose Kit
“ordering was easy ,and fast”