GMC 250-22 Engine Parts

Essential GMC 250-22 Engine Parts

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile

from

$155.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:
  • Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
  • Nominally Rated At 200,000 Psi Tensile Strength
  • These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
  • Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
See More

Driveworks – Oil Seal (Part No.S-9845)

Oil Seal

from

$7.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 4569)

Engine Valve Cover Gasket Set

from

$12.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Sealed Power – Engine Connecting Rod Bearing (Part No.1905CP 20)

Engine Connecting Rod Bearing

from

$18.79
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:
  • Steel-backed bronze alloy lining with overplate
  • Popular for fatigue resistance & strength
  • Provides conformability required for older apps
  • Our standard material is comparable to competitors performance bearing
  • Note – This material offers less resistance to wear & corrosion than other materials.
  • Utilizes ISO & QS certified manufacturing
See More

ARP Auto Racing – For Use With Chevy Small Block, 13/16" Socket Size, 2.470" Under Head L (Part No.234-2501)

For Use With Chevy Small Block, 13/16" Socket Size, 2.470" Under Head L

from

$34.99
As the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra strong 200,000 Pounds Per Square Inch bolts that let you exert maximum clamping force. Special features comes with 1/4 Inch thick, wide area washer and an extra tall 12 point head that accepts a deep socket and eliminates the worry of stripping the head.

Product Features:
  • Ultra Strong Bolt Rated At 200,000 Pounds Per Square Inch
  • 1/4 Inch Thick, Wide Area Washer And An Extra Tall 12 Point Head That Accepts A Deep Socket And Eliminates The Worry Of Stripping The Head
  • Delivers ARP Quality And Reliability
  • Made In USA
  • Sold Individually
  • 7/16″-20 RH Thread Size
  • 2.47″ Underhead Length
  • 200,000 PSI
See More

Mr. Gasket – Oil Dipstick And Tube (Part No.6235)

Oil Dipstick And Tube

from

$16.49
Mr. Gasket Oil Dipstick is similar in design to original equipment, it can be installed with simple hand tools.

Product Features:
  • Fits Chevy Small Block 1955-79 283-400 CID
  • Block Mounted
  • Chrome Plated Steel
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)

Engine Valve Stem Oil Seal Set

from

$15.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Mr. Gasket – Engine Oil Pan (Part No.9425)

Engine Oil Pan

from

$108.99
This Mr. Gasket Oil Pan comes natural unfinished steel and includes the drain plug, washers & bolts. Original equipment style with stock depth and capacity. Oil pan gasket, dipstick and tube sold separately.

Product Features:
  • Small Block Chevy 283-350 1955-’79
  • Drivers Side Dipstick
  • OEM Style – Stock Depth & Capacity
See More

Edelbrock – Victor-Link Adjustable True-Roller Timing Chain Set (Part No.7880)

Victor-Link Adjustable True-Roller Timing Chain Set

from

$169.99
Product Features:
  • Keyway Adjustable
  • Double Roller Timing Chain Type
  • Induction Hardened Billet Steel Material
  • 9-Keyway Setting Points
  • For Chevys Opperating in 6500-8500 RPM Range
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 7391 S-4)

Cylinder Head Gasket Set

from

$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
  • Contains all the parts needed to complete the repair unless otherwise noted
  • Contains all the parts needed to complete the repair unless otherwise noted
See More

Dorman – Steel Cup Expansion Plug 9/16 In., Height 0.250 (sold by each) (Part No.555-008)

Steel Cup Expansion Plug 9/16 In., Height 0.250 (sold by each)

from

$0.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)

Ultra-Cool Engine Oil Cooler Kit

from

$167.99
Product Features:
  • Size: 3/4 in. x 10 in. x 12-1/4 in.
  • Medium duty applications
  • All except Chevrolet V8 applications
  • Two-pass design for increased cooling
See More

Felpro – Fuel Pump Bowl Gasket (Part No.5019)

Fuel Pump Bowl Gasket

from

$1.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

National – Shaft Repair Sleeve (Part No.99176)

Shaft Repair Sleeve

from

$46.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

ARP Auto Racing – ARP Rocker Arm Stud Kit (Part No.234-7201)

ARP Rocker Arm Stud Kit

from

$99.99
ARP rocker studs are concentric within .005″, extra-large radius base offers greater resistance to flex. Note: To be used ONLY with ARP’s patented Perma-Loc adjusters. Made of 8740 chrome moly forgings and heat-treated to 180,000 PSI. Tip ground flush for optimum adjuster seating.

Product Features:
  • 7/16″-14 Thread Size(s)
  • .700″ Thread Length
  • 8740 Chromoly
  • 1.75″ Effective Stud Length
  • Set of 16
  • .800″ Adjuster Thread Depth
  • 3/8″-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application
  • Black Oxide
See More

ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)

For Use With Chevy Small Block With Standard 2 Piece Cork Gasket

from

$37.49
The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.

Product Features:
  • Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
  • Bolt Kits Come With Washers
  • Stud Kits Come Complete With A Special Locking
  • Easily Installed Without The Worry Of Cross-Threading
See More

Felpro – Oil Pan Gasket Set: Cork-Rubber, 6 Piece Set (Part No.OS 6412 C)

Oil Pan Gasket Set: Cork-Rubber, 6 Piece Set

from

$14.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

ARP Cylinder Head Stud Kit

from

$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best. 

Product Features:
  • 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • Small Block Chevy
  • Sold As A Kit
See More

Felpro – Engine Valve Cover Load Spreader Set (Part No.ES 72676)

Engine Valve Cover Load Spreader Set

from

$34.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Includes all parts needed to complete the repair
See More

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Fuel Pump Mounting Gasket

from

$2.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

ARP Auto Racing – For Use With All Chevy Small Blocks, 8740 Steel, 190000 Psi (Part No.134-7901)

For Use With All Chevy Small Blocks, 8740 Steel, 190000 Psi

from

$18.99
Many an engine has been destroyed as a result of oil pump driveshaft failure. To cure this all too common problem, ARP has designed an extra heavy duty shaft that will provide you with the necessary reliability. The shaft is made from heat treated, premium grade aerospace chrome moly steel. Moreover, the shaft diameter is a larger diameter than the OEM unit. These features combine to enable ARP shafts to handle the added torque requirements of increased capacity oil pumps or heavy viscosity lubricants.

Product Features:
  • Extra Heavy Duty Shaft That Will Provide The Necessary Reliability
  • Enable Shafts To Handle The Added Torque Requirements Of Increased Capacity Oil Pumps Or Heavy Viscosity Lubricants
  • Made From Premium Grade 8740 And Heat Treated To 190,000 Psi
  • Alignment Sleeve Is Roll Formed Onto The Shaft (Not Welded Or Pinned), Enabling The Sleeve To Float, Allowing For Slight Misalignment
  • Black Oxide
See More

Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60739)

RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam

from

$990.99
Product Features:
  • Out-of-the-Box Bolt-On Performance
  • With Straight Plugs
  • 70cc Combustion Chambers Improve Performance
  • Retain Stock Compression Ratio
See More

Sealed Power – Engine Push Rod (Part No.RP-3028)

Engine Push Rod

from

$2.49
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
See More

Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)

Valve Seat for S/B Chevy heads with 1.60" Valves

from

$18.99
Product Features:
  • Valve Seats
  • Performer Series
  • 50-State Street Legal
See More

Dorman – Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each) (Part No.570-008)

Rubber Expansion Plug 1-3/8 In. - Size Range 1-3/8 In. - 1-1/2 In. (sold by each)

from

$3.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Helping You Find the Right Engine Parts for Your GMC 250-22

You love your 250-22. So we’ve made it easier than ever to help you find GMC 250-22 Engine Parts in our online catalog. Our inventory holds 66 aftermarket and OEM Engine Parts for your GMC 250-22, ranging from $0.43 to $1,575.99.

We offer parts from 12 brands trusted to make quality Engine Parts for your GMC 250-22. Before you buy, take some time to read through customer reviews. We currently have 204 reviews of GMC 250-22 Engine Parts from previous customers. Some of the top rated parts include Econo-Kool® Engine Oil Cooler with 4.7 stars and Engine Valve Spring Retainer Keeper with 5.0 stars.

Find your 250-22 Engine Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC 250-22 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Engine Parts Brands for Your GMC 250-22

Our inventory holds Engine Parts for your GMC 250-22 from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like National, Felpro, and Mr. Gasket, all of which can keep that GMC happy.

Top-Rated National Engine Parts

Leading National Engine Parts

We carry National brand parts for your GMC 250-22 across several catalog categories, including Engine Internals and Engine Timing Parts. Some of our most reviewed National parts include:
Multi Purpose Seal
from $12.99
(15)
Multi Purpose Seal
Crankshaft Seals
Engine Harmonic Balancer Repair Sleeve
from $18.99
(5)
Engine Harmonic Balancer Repair Sleeve
Timing Cover Seals

FAQs for GMC 250-22 Engine Parts

What are the most purchased Engine Parts for the GMC 250-22?

Out of 66 Engine Parts for the GMC 250-22, the most popular in our inventory are:
Oil Dipstick And Tube
from $16.49
(11)
Oil Dipstick And Tube
Engine Oil Dipsticks
VALVE COVER GASKET SET
from $29.99
(2)
VALVE COVER GASKET SET
Valve Cover Gaskets
Oil Seal
from $7.29
(2)
Oil Seal
Crankshaft Seals

What are the top-rated GMC 250-22 Engine Parts?

Top-rated Engine Parts for your GMC 250-22 based on customer reviews/ratings are:
Econo-Kool® Engine Oil Cooler
from $141.99
(3)
Econo-Kool® Engine Oil Cooler
“Good price perfect fit had all the parts I needed good quality”
Engine Valve Spring Retainer Keeper
from $0.43
(2)
Engine Valve Spring Retainer Keeper
“I would purchase again”
Ultra-Cool Engine Oil Cooler Kit
from $167.99
(1)
Ultra-Cool Engine Oil Cooler Kit
“Purchased for a 2005 Yukon XL Denali. Exceeded expectations for an aftermarket product”