GMC 100 Engine Parts
Top GMC 100 Engine Parts Categories
We carry over 94 Engine Parts in inventory for the GMC 100. If you’re looking for aftermarket Engine Parts for your GMC 100, check out all these categories:
Essential GMC 100 Engine Parts
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)
from
$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Small Block Chevy
- Sold As A Kit
National – Shaft Repair Sleeve (Part No.99176)
from
$46.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
ARP Auto Racing – For Use With Chevy Gen Iii/Ls Series Small Block/ Gmpp Lsx Block, Hex Head (Part No.234-5608)
from
$369.99
There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. All kits come complete with hardened parallel ground washers and high quality nuts. Some applications have provisions for mounting wind age trays and have specially designed standoff studs with serrated lock nuts to position the wind age tray and lock it securely in place. The studs are manufactured from 8740 chrome moly steel, heat treated in-house to 200,000 Pounds Per Square Inch tensile strength, and precision J-form threads rolled after heat treat to create a fastener that has threads 1000 Percent stronger than others.
Product Features:
See More
Product Features:
- Kit Come Complete With Hardened Parallel Ground Washers And High Quality Nuts
- Manufactured From 8740 Chrome Moly Steel
- Heat Treated To 200,000 Pounds Per Square Inch
- Precision J-Form Threads Rolled After Heat Treat To Create A Fastener That Has Threads 1000 Percent Stronger Than Others
- 200,000 PSI
- Sold As A Kit
Felpro – Engine Crankshaft Seal Kit (Part No.BS 12173)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Mr. Gasket – Oil Dipstick And Tube (Part No.6235)
from
$16.49
Mr. Gasket Oil Dipstick is similar in design to original equipment, it can be installed with simple hand tools.
Product Features:
See More
Product Features:
- Fits Chevy Small Block 1955-79 283-400 CID
- Block Mounted
- Chrome Plated Steel
Driveworks – Oil Seal (Part No.S-9845)
from
$7.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Felpro – Fuel Pump Bowl Gasket (Part No.5019)
from
$1.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Cylinder Head Gasket Set (Part No.HS 7391 S-4)
from
$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Contains all the parts needed to complete the repair unless otherwise noted
- Contains all the parts needed to complete the repair unless otherwise noted
Felpro – TIMING COVER GASKET SET (Part No.TCS 45114)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Sealed Power – Engine Push Rod (Part No.RP-3028)
from
$2.49
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
See More
Mr. Gasket – Engine Oil Pan (Part No.9425)
from
$108.99
This Mr. Gasket Oil Pan comes natural unfinished steel and includes the drain plug, washers & bolts. Original equipment style with stock depth and capacity. Oil pan gasket, dipstick and tube sold separately.
Product Features:
See More
Product Features:
- Small Block Chevy 283-350 1955-’79
- Drivers Side Dipstick
- OEM Style – Stock Depth & Capacity
ARP Auto Racing – For Use With All Chevy Small Blocks, 8740 Steel, 190000 Psi (Part No.134-7901)
from
$18.99
Many an engine has been destroyed as a result of oil pump driveshaft failure. To cure this all too common problem, ARP has designed an extra heavy duty shaft that will provide you with the necessary reliability. The shaft is made from heat treated, premium grade aerospace chrome moly steel. Moreover, the shaft diameter is a larger diameter than the OEM unit. These features combine to enable ARP shafts to handle the added torque requirements of increased capacity oil pumps or heavy viscosity lubricants.
Product Features:
See More
Product Features:
- Extra Heavy Duty Shaft That Will Provide The Necessary Reliability
- Enable Shafts To Handle The Added Torque Requirements Of Increased Capacity Oil Pumps Or Heavy Viscosity Lubricants
- Made From Premium Grade 8740 And Heat Treated To 190,000 Psi
- Alignment Sleeve Is Roll Formed Onto The Shaft (Not Welded Or Pinned), Enabling The Sleeve To Float, Allowing For Slight Misalignment
- Black Oxide
Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)
from
$32.99
Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for
Product Features:
See More
Product Features:
- Stamped Steel Material
- Comes W/ Front Crankshaft Seal Installed
- W/ Welded Reinforcement Plate
- Chrome Finish
- Ideal For Preventing Camshaft Walk When Used W/ Thrust Button
Sealed Power – Engine Connecting Rod Bearing (Part No.1905CP 10)
from
$18.79
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength
- Provides conformability required for older apps
- Our standard material is comparable to competitors performance bearing
- Note – This material offers less resistance to wear & corrosion than other materials.
- Utilizes ISO & QS certified manufacturing
Edelbrock – Victor-Link Adjustable True-Roller Timing Chain Set (Part No.7880)
from
$169.99
Product Features:
See More
- Keyway Adjustable
- Double Roller Timing Chain Type
- Induction Hardened Billet Steel Material
- 9-Keyway Setting Points
- For Chevys Opperating in 6500-8500 RPM Range
ARP Auto Racing – For Use With Small/ Big Block Chevy, Hex Head, Black Oxide, With Nuts/ Washers (Part No.230-7003)
from
$7.29
you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength To Provide You With Plenty Of Clamping Force
- Premium Grade Oil Pump Stud
- The Studs Come With Flat Washers And Nuts
- Black Oxide Finished 8740
- Hi-Volume
- 3.125″
Felpro – Engine Gasket Set (Part No.FS 7613 SH-2)
from
$121.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Full Sets contain all the gaskets and seals necessary for a complete engine overhaul
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Validated for fit, form, and function
Dorman – Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each) (Part No.570-008)
from
$3.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)
from
$151.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Non-Rotator Style: Dyno Tested and Street Proven
- Great Match to Edelbrock Camshaft Kit
Edelbrock – Small-Block Chevy E-Series Cylinder Head E-210 Hydraulic Roller Cam (Part No.5087)
from
$1575.99
The Edelbrock #5087 E-210 Cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased ai
Product Features:
See More
Product Features:
- Complete Pair For Mechanical Flat Tappet
- 64cc Combustion Chamber Volume
- 210cc Intake/75cc Exhaust Runner Volume
- 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.562 in. Deck Thickness
ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers (Part No.134-3601)
from
$109.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.
Product Features:
See More
Product Features:
- High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
- Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
- Rated At 180,000 PSI Tensile Strength
- High Performance Head Bolts Are Stronger
Edelbrock – Rollin’ Thunder Camshaft Kit for 1957-86 Small-Block Chevy V8 (Part No.22015)
from
$1566.99
Edelbrock part #22015 Rollin’ Thunder camshaft kit is designed for 1957-86 small-block Chevy V-8 applications. This complete cam kits include an Edelbrock Rollin’ Thunder hydraulic roller camshaft, hydraulic roller lifters and pushrods. The Rollin’ Thunde
Product Features:
See More
Product Features:
- Iron Camshaft Material
- 0.539 in. Intake Valve Lift with Factory Rocker Arm Ratio
- Roller Lifter Type
- Valve Springs Required
- Assembly Lubricant Included
Felpro – Oil Pan Gasket Set: Cork-Rubber, 6 Piece Set (Part No.OS 6412 C)
from
$14.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Sealed Power – Engine Valve Lifter (Part No.HT-951)
from
$9.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Piston Ring Set (Part No.E-252X)
from
$76.99
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
GMC 100 Engine Parts Categories
Helping You Find the Right Engine Parts for Your GMC 100
You love your 100. So we’ve made it easier than ever to help you find GMC 100 Engine Parts in our online catalog. Our inventory holds 94 aftermarket and OEM Engine Parts for your GMC 100, ranging from $0.43 to $3,552.99.
We offer parts from 12 brands trusted to make quality Engine Parts for your GMC 100. Before you buy, take some time to read through customer reviews. We currently have 470 reviews of GMC 100 Engine Parts from previous customers. Some of the top rated parts include Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet with 3.8 stars and Econo-Kool® Engine Oil Cooler with 4.7 stars.
Find your 100 Engine Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC 100 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Engine Parts Brands for Your GMC 100
Our inventory holds Engine Parts for your GMC 100 from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like National, Felpro, and Sealed Power, all of which can keep that GMC happy.
We have Dorman parts available for your GMC 100 in categories like Engine Timing Parts. Some of the top-rated Dorman parts in these categories are:
from
$3.99
(2)
Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each)
Timing Cover Plugs
Top-Rated National Engine Parts
Leading National Engine Parts
We carry National brand parts for your GMC 100 across several catalog categories, including Engine Internals and Engine Timing Parts. Some of our most reviewed National parts include:
FAQs for GMC 100 Engine Parts
What are the most purchased Engine Parts for the GMC 100?
Out of 94 Engine Parts for the GMC 100, the most popular in our inventory are:
What are the top-rated GMC 100 Engine Parts?
Top-rated Engine Parts for your GMC 100 based on customer reviews/ratings are:
from
$287.99
(4)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
“I love this cam it gives me the power I need at the low end to pull havey loads where I need it the most for the work I do with my truck This cam and ”
from
$141.99
(3)
Econo-Kool® Engine Oil Cooler
“Good price perfect fit had all the parts I needed good quality”
from
$9.49
(3)
Rear Main Seal Set
“Do not try to use this in a buick 401. It is way to large in diameter. It will not hammer flat enough to work. Would give no stars if possible. Felpr”
