from

$17.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$53.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$481.25

Motorcraft manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

New compressors are the same components that were installed in the vehicle when it rolled off the assembly line
Loaded compressors include:
Clutch pulley and coil for easy ordering (most assemblies are pre-charged with PAG refrigerant oil)
Pre-shimmed clutch/pulley assemblies to provide direct bolt-in installation
Forged-Aluminum Pistons – For maximum life in low-lubrication, high-temperature conditions
Tin-Coated Swashplates – For added strength and durability
Rubber-Dampened Clutch – To minimize clutch noise during engagement
Pre-shimmed Clutch Assembly – To help make installations easier on loaded compressors
Dual Center-Seam Seals – For additional leak protection

from

$145.16

Without Controller Save time, money and labor with Dorman’s A/C Condenser Fan Assembly. It comes ready to install as a complete assembly, eliminating the need to make separate purchases. Plus, our high quality engineering ensures optimal air flow and strength to prevent your vehicle from overheating. This assembly includes the fan motor, fan blade, and fan shroud. This is the fan that is controlled by the air conditioning system and not the fan that is controlled by the coolant temp thermo-fan switch. The fan motor is also available separately for some applications (see additional catalog entries in the A/C Condenser Fan Motor category for availability).

Product Features:

Motor, shroud and blade included
Plug and Play jumper harnesses included (where applicable)
Replacement helps sustain proper engine operation
Direct replacement for a proper fit every time

from

$40.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$43.05

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$47.94

A/C Pressure Switch

from

$51.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$36.99

This 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles
Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction
Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.29

This HVAC switch connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this HVAC switch connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$99.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$1.99

Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications

from

$54.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$28.49

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$48.83

When servicing air conditioning systems, choose Motorcraft climate-control components. They offer quality at a great value and are the only climate-control components recommended by Ford Motor Company.

Product Features:

All parts meet original equipment requirements for fit, finish and durability
Specifically engineered for Ford and Lincoln vehicles
Durability tested to meet demanding original equipment service life specifications
Helps maintain original performance standards

from

$304.99

Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators are helium leak tested prior to packaging.
Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
The specific PAG oil required by your vehicle application is included.
O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

from

$63.99

This A/C compressor bypass pulley is a cost-effective solution to allow the original equipment drive belt to be used while bypassing an inoperable A/C compressor.

Product Features:

Cost-effective solution – this bypass pulley retains the use of the standard drive belt after a failed A/C compressor is removed
Durable components – this bypass pulley uses quality components for a long service life
Easy to install – uses the same mounting points as the A/C compressor
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$89.99

New Standard Replacement A/C Manifold Hose Assembly, V6 Engine

Product Features:

V6 Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$112.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$14.29

OE style connectors; Molded plastic construction; Quality contacts ensure proper conductivity; Universal applications

from

$19.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Precision engineered
OE style molded connectors
Quality contacts ensure proper conductivity
Vehicle specific applications

from

$44.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$60.70

A/C Relief Valve

from

$61.05

Product Features:

Direct-fit OE replacement effectively restores and maximizes engine horsepower and torque curves while reducing emissions and improving vehicle efficiency
Precision-machined to ensure accurate variable valve timing, correct rough idle, and restore drivability
OE-matching sprocket tooth profiles result in quiet operation
Extensively designed to lower leakage and lash, which improves performance and leads to noise-free operation
Undergoes 100% end-of-line testing to meet or exceed OE performance