Ford Transit Connect Suspension Parts

Essential Ford Transit Connect Suspension Parts

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$253.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

Max Performance Synthetic Power Steering Fluid

from

$6.99
Max Performance Synthetic Power Steering Fluid

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-815381)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$200.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Monroe – OESpectrum Suspension Shock Absorber (Part No.37311)

OESpectrum Suspension Shock Absorber

from

$113.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • BUY WITH CONFIDENCE – Comes with Monroe’s Limited Warranty and exclusive Feel the Difference
  • 5/8-inch (15.9 mm) diameter piston rod (On most applications)
See More

Dorman – Leaf Spring (Part No.929-250)

Leaf Spring

from

$384.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:
  • Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
  • Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
  • Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
  • Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
See More

MOOG – Suspension Control Arm Bushing (Part No.K200860)

Suspension Control Arm Bushing

from

$99.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

Monroe – Strut-Mate Suspension Strut Mount (Part No.908900)

Strut-Mate Suspension Strut Mount

from

$71.99
Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

Monroe – OESpectrum Suspension Strut (Part No.72788)

OESpectrum Suspension Strut

from

$104.99
Monroe OESpectrum shock absorbers and struts are available for popular for European, Asian and North American passenger cars, light trucks and SUVs featuring Tenneco’s latest global original equipment valving technologies designed with the right technology specific for each application. OESpectrum shocks and struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness. They are backed by Monroe’s Limited Warranty and Feel the Difference .

Product Features:
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Twin Technology: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Hardened and Chrome Plated Piston Rod: Long service life.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
  • Premium – Limited Warranty
  • For Commercial Usage Refer to Product Limited Warranty
See More

MOOG – Suspension Control Arm (Part No.RK641540)

Suspension Control Arm

from

$115.99
Product Features:
  • EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
  • Construction and design validated by MOOG engineers
  • Broad coverage for foreign and domestic applications
See More

Monroe – Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly, Pack of 2 (Part No.58658)

Load Adjusting Rear Suspension Shock Absorber and Coil Spring Assembly, Pack of 2

from

$161.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
See More

Carquest Premium – COMPLET STRUT ASMBLY (Part No.28-920883)

COMPLET STRUT ASMBLY

from

$78.99
COMPLET STRUT ASMBLY

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

Shock-Mate Suspension Shock Absorber Bellows

from

$24.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

KYB – Jounce Bumper and Bellows (Part No.SB110)

Jounce Bumper and Bellows

from

$26.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

Monroe – Strut-Mate Front; Rear Suspension Strut Bumper and Bellows Kit (Part No.63631)

Strut-Mate Front; Rear Suspension Strut Bumper and Bellows Kit

from

$48.99
Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

Carquest Premium – Steering Angle Sensor (Part No.SBE3848)

Steering Angle Sensor

from

$95.99
As part of the Vehicle Stability System multiple sensor inputs are required for the processor to perform the brake control operation to maintain vehicle skid control and vehicle stability control. The Power Steering Speed Sensor provides the processor the needed steering position and rotational speed input required for proper braking operation.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
See More

KYB – Jounce Bumper and Bellows (Part No.SB101)

Jounce Bumper and Bellows

from

$21.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

Sachs – Strut Bump Stop Service Kit (Part No.L3045450890SAC)

Strut Bump Stop Service Kit

from

$30.26
SACHS Service Kits replace the Original Equipment boot kits and bump stops providing protection to the piston rod preventing damage and prohibiting rust.

Product Features:
  • SACHS Service Kits help to prolong the life and performance of the shock or strut.
  • Always replace your Service kits in pairs.
  • Are built with design and quality that matches or exceeds OE quality
See More

Carquest Premium – Multi-Use Connector (Part No.PTC2893)

Multi-Use Connector

from

$36.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
See More

Monroe – Strut-Mate Suspension Strut Mount (Part No.908961)

Strut-Mate Suspension Strut Mount

from

$87.99
Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

Rare Parts – Strut Mount (Part No.RP53613)

Strut Mount

from

$137.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Meets or exceeds OE requirements
  • Helps restore vehicle ride.
  • Reduces tire wear
See More

KYB – Strut Mount and Bearing (Part No.SM5815)

Strut Mount and Bearing

from

$69.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The Highest Quality Replacement Strut Mount Available
  • Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
  • Superior Rubber Reduces Noise, Vibration And Harshness
  • Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
  • Matched Grade Studs And Nuts
See More

Helping You Find the Right Suspension Parts for Your Ford Transit Connect

You love your Transit Connect. So we’ve made it easier than ever to help you find Ford Transit Connect Suspension Parts in our online catalog. Our inventory holds 41 aftermarket and OEM Suspension Parts for your Ford Transit Connect, ranging from $6.99 to $384.99.

We offer parts from 10 brands trusted to make quality Suspension Parts for your Ford Transit Connect. Before you buy, take some time to read through customer reviews. We currently have 6,333 reviews of Ford Transit Connect Suspension Parts from previous customers. Some of the top rated parts include Shock-Mate Suspension Shock Absorber Bellows with 4.6 stars and Shock-Mate Suspension Shock Absorber Bellows with 4.6 stars.

Find your Transit Connect Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Transit Connect part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Suspension Parts Brands for Your Ford Transit Connect

Our inventory holds Suspension Parts for your Ford Transit Connect from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Monroe, and Moog, all of which can keep that Ford happy.
We have Valvoline parts available for your Ford Transit Connect in categories like Air Suspension and Kits. Some of the top-rated Valvoline parts in these categories are:
ATF for Mercon®V Applications Conventional, 1 Quart
from $12.99
(120)
ATF for Mercon®V Applications Conventional, 1 Quart
Suspension Self-Leveling Unit Fluids

FAQs for Ford Transit Connect Suspension Parts

What are the most purchased Suspension Parts for the Ford Transit Connect?

Out of 41 Suspension Parts for the Ford Transit Connect, the most popular in our inventory are:
Strut Bellows
from $36.99
(12)
Strut Bellows
Strut Bellows
Strut-Mate Front; Rear Suspension Strut Bumper and Bellows Kit
from $48.99
(9)
Strut-Mate Front; Rear Suspension Strut Bumper and Bellows Kit
Suspension Strut Bumper and Bellows Kits
Jounce Bumper and Bellows
from $21.99
(6)
Jounce Bumper and Bellows
Shock Boots, Levelers, and Accessories

What are the top-rated Ford Transit Connect Suspension Parts?

Top-rated Suspension Parts for your Ford Transit Connect based on customer reviews/ratings are:
Shock-Mate Suspension Shock Absorber Bellows
from $26.99
(35)
Shock-Mate Suspension Shock Absorber Bellows
“Used this to replace the torn shock boot on my Goldwing 1500 motorcycle. it fit well, used a tie warp and it was good to go”
Shock-Mate Suspension Shock Absorber Bellows
from $24.99
(13)
Shock-Mate Suspension Shock Absorber Bellows
“worked very well”
Strut-Mate Suspension Strut Mount
from $87.99
(1)
Strut-Mate Suspension Strut Mount
“It works on both right or left. Hope the description said this cause the rud cashier said i should had check before i bought it online.”