Ford Transit-350 Drivetrains

Essential Ford Transit-350 Drivetrains

Royal Purple – High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (Part No.51530)

High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart

from

$41.99
Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:
  • Better wear protection
  • Increased fuel efficiency
  • Better protection of the expensive catalytic emission system
  • Improved compatibility with fuels containing ethanol
  • Superior corrosion protection
  • Meets ILSAC GF-5 and Dexos1 performance requirements
See More

Yukon Gear – Cross Pin Shaft For 9.75" Ford (Part No.33337)

Cross Pin Shaft For 9.75" Ford

from

$49.99
Cross pin shaft for 9.75″ Ford.

Product Features:
  • Cross pin shaft
  • Fits Ford 9.75″
See More

Yukon Gear – Steel Cover For Ford 9.75" (Part No.32329)

Steel Cover For Ford 9.75"

from

$78.99
Yukon 4340 Chrome-Moly replacement rear axle for Dana 44, 30 spline (26″ –34″ CUT2LTH) TRIPLE DRILLED. Yukon 4340 Chrome Moly alloy axles offer a strength increase over stock while retaining a low cost. Yukon 4340 Chrome Moly alloy rear axles come wi

Product Features:
  • Fits Ford 9.75″
  • Steel
See More

USA Standard Gear – Standard Spider Gear Set For Ford 9.75" (Part No.39019)

Standard Spider Gear Set For Ford 9.75"

from

$188.99
Product Features:
  • Spider gear kit
  • Fits Ford 9.75″ open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – 9.75" Tracloc Clutch Set, 16 Pieces (Part No.16036)

9.75" Tracloc Clutch Set, 16 Pieces

from

$249.99
9.75″ TracLoc clutch set, 16 Pieces (does not include belleville).

Product Features:
  • Clutch kit
  • Fit Ford 9.75″ Trac Loc positraction
See More

FAG US – Shaft Seal (Part No.SS6392)

Shaft Seal

from

$20.49
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

Yukon Gear – Standard Open Case For Ford 9.75" (Part No.20132)

Standard Open Case For Ford 9.75"

from

$314.99
Standard Open case for Ford 9.75″. This is a bare case and does not come with any internal components. This part carries a one year warranty against manufacturing defects.

Product Features:
  • Standard open carrier case
  • Fits Ford 9.75″
  • Does not include spider gears
See More

Yukon Gear – 9.75" Ford C-Clip (Part No.33248)

9.75" Ford C-Clip

from

$16.99
9.75″ Ford C-Clip.

Product Features:
  • C-clip
  • Fits Ford 9.75″
See More

Driveworks – Universal Joint (Part No.DW-331BL)

Universal Joint

from

$15.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

National – Tapered Roller Bearing Cone (Part No.LM104949)

Tapered Roller Bearing Cone

from

$21.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:
  • PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
  • OE-STYLE DESIGN – Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

National – Tapered Roller Bearing Cone (Part No.HM89443)

Tapered Roller Bearing Cone

from

$38.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:
  • PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
  • OE-STYLE DESIGN – Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Motive Gear – Differential Ring and Pinion (Part No.F9.75-373)

Differential Ring and Pinion

from

$311.99


Product Features:
  • FRD 10BL 9.75 R/P 3.73 MG
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – DiffrlPinBrngSetKit (Part No.13117)

DiffrlPinBrngSetKit

from

$334.99
DiffrlPinBrngSetKit

Yukon Gear – DrvShftPinYoke (Part No.33574)

DrvShftPinYoke

from

$12.99
DrvShftPinYoke

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)

Non-Greaseable Super Strength Universal Joint

from

$37.99
Product Features:
  • BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
  • CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
  • KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

Dorman – Spindle Nut 2 In.-16 L Hex Size 3 In. (Part No.615-134.1)

Spindle Nut 2 In.-16 L Hex Size 3 In.

from

$45.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Master Overhaul Kit For ’11 & Up Ford 9.75" Differential (Part No.14202)

Master Overhaul Kit For '11 & Up Ford 9.75" Differential

from

$569.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits 2011 and up Ford 9.75″
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush, and gasket.
See More

Yukon Gear – Dura Grip Positraction For Ford 9.75" With 34 Spline Axles (Part No.26020)

Dura Grip Positraction For Ford 9.75" With 34 Spline Axles

from

$925.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits Ford 9.75″
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Standard Open Spider Gear Kit For 9.75" Ford With 34 Spline Axles (Part No.16038)

Standard Open Spider Gear Kit For 9.75" Ford With 34 Spline Axles

from

$269.99
Yukon standard open spider gear kit for 9.75″ Ford with 34 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Ford 9.75″ open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

USA Standard Gear – Bearing Kit For ’11 & Up Ford 9.75" (Part No.58030)

Bearing Kit For '11 & Up Ford 9.75"

from

$449.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and br

Product Features:
  • Fits 2011 and up Ford 9.75″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

National – Bearing Race (Part No.HM89411)

Bearing Race

from

$27.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:
  • PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION – Crowned raceways for even load distribution
  • OE-STYLE DESIGN – Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Dorman – Axle O-Ring Kit (Part No.926-379)

Axle O-Ring Kit

from

$14.99
This axle shaft O-ring matches the fit and function of the original equipment O-ring to maintain a tight seal between the wheel hub and the axle housing. Made of quality materials, this O-ring should be replaced whenever the axle is serviced.

Product Features:
  • Ideal replacement – this axle shaft O-ring matches the fit and function of the original equipment O-ring
  • Durable materials – this O-ring is made of quality material for a reliable, leak-free repair
  • Convenient service item – this axle O-ring should be replaced whenever the axle or wheel hub is serviced
  • Thoroughly tested – this part has undergone try-on testing to ensure conformance to product standards
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1136R)

Differential Pinion Shim Kit

from

$17.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More

Yukon Gear – Pinion Depth Shims For Ford 9.75" (Part No.55007)

Pinion Depth Shims For Ford 9.75"

from

$32.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Pinion depth shims for Ford 9.75″
See More

Helping You Find the Right Drivetrains for Your Ford Transit-350

You love your Transit-350. So we’ve made it easier than ever to help you find Ford Transit-350 Drivetrains in our online catalog. Our inventory holds 94 aftermarket and OEM Drivetrains for your Ford Transit-350, ranging from $6.99 to $2,475.99.

We offer parts from 13 brands trusted to make quality Drivetrains for your Ford Transit-350. Before you buy, take some time to read through customer reviews. We currently have 37,479 reviews of Ford Transit-350 Drivetrains from previous customers. Some of the top rated parts include Greaseable Premium Universal Joint with 4.0 stars and Max Automatic Transmission Fluid (1 Quart) with 4.8 stars.

Find your Transit-350 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Transit-350 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your Ford Transit-350

Our inventory holds Drivetrains for your Ford Transit-350 from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Royal Purple, Valvoline, and Moog, all of which can keep that Ford happy.

FAQs for Ford Transit-350 Drivetrains

What are the most purchased Drivetrains for the Ford Transit-350?

Out of 94 Drivetrains for the Ford Transit-350, the most popular in our inventory are:
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart
from $18.99
This product is not rated
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart
Differential Oil
Greaseable Super Strength Universal Joint
from $37.99
(41)
Greaseable Super Strength Universal Joint
U-Joints

What are the top-rated Ford Transit-350 Drivetrains?

Top-rated Drivetrains for your Ford Transit-350 based on customer reviews/ratings are:
Greaseable Premium Universal Joint
from $41.99
(31)
Greaseable Premium Universal Joint
“Great replacement, easy to install if you are somewhat handy and know what you are doing.”
Max Automatic Transmission Fluid (1 Quart)
from $19.49
(30)
Max Automatic Transmission Fluid (1 Quart)
“I believe it improves car performance and maintains all running parts much better then the regular transmission fluids out there. Love this product an”
Universal Joint
from $15.99
(28)
Universal Joint
“It worked”