Ford Transit-250 Oil and Lubricants

Essential Ford Transit-250 Oil and Lubricants

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon

from

$59.99
Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the No. 1 gear oil brand.

Product Features:
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
  • MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360
See More

Royal Purple – MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT (Part No.01301)

MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT

from

$26.49
Max Gear is recommended for truck and automotive differentials, outboard motor lower units or in rear axles or manual transmissions requiring an API fluid. Max Gear is a high performance automotive gear oil designed to provide maximum protection to heavily loaded gears while increasing power throughput through the drive train. Max Gear virtually eliminates both gear and bearing wear-even under severe squeeze film conditions caused by extremely high loads, sudden shock loads or low RPMs. Slippery, synthetic molecules not only reduce wear and friction but significantly increase Max Gear’s cold weather fluidity and lubricity, making it the ideal choice for vehicles operating in cold climates. Gears run smoother, quieter, cooler and longer without overhauls. It is noncorrosive to both ferrous and nonferrous metals.

Product Features:
  • Maximizes horsepower
  • Extends gear and bearing life
  • Reduces operating temperature
  • Lower coefficient of friction
  • Superior corrosion protection
  • Separates rapidly from water
  • For use with open, limited-slip and locking differential
  • Contains limited-slip friction modifier
  • Made in USA
See More

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (Part No.889787)

Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart

from

$19.99
We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:
  • FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations.
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
  • MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5
See More

Castrol – Edge High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 5 Quart (Part No.15906D)

Edge High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 5 Quart

from

$37.99
Castrol EDGE High Mileage 5W-20 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:


    Product Features:
    • Phosphorus Replacement Technology to help extend the life of the emission system
    • Reduces leaks, oil burnoff and power robbing deposits
    • 15,000 miles between oil changes (1)
    • (1) Or one year, whichever comes first
    • Meets or exceeds the following specifications:
    • API SP/SN PLUS/SN/SM
    • ILSAC GF-6
    • Meets Ford WSS-M2C947-B1
    • Meets engine test requirements of Chrysler MS 6395
    • Meets Ford WSS-M2C960-A1
See More

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

3 Qt - Penzoil 80W90 Conventional Gear Oil

from

$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:
  • Includes three quarts of conventional oil
See More

Castrol – Edge 5W-20 Full Synthetic Motor Oil, 3X Stronger Protection, 1 Quart (Part No.152C82)

Edge 5W-20 Full Synthetic Motor Oil, 3X Stronger Protection, 1 Quart

from

$11.99
Castrol EDGE 5W-20 is an advanced full synthetic motor oil and the optimal choice for drivers who want the best combination of wear protection, viscosity control and thermal stability to maximize engine performance. It is one of Castrol’s strongest engine oils with the strength to maintain this unsurpassed level of engine protection for up to 20,000 miles between oil changes or one year.

Product Features:


    Product Features:
    • 3X Stronger than the leading full synthetic (1)
    • 10X Better high stress performance (2)
    • 20,000 miles between oil changes (3)
    • (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
    • (2) As measured in Seq IX test under high load/torque conditions vs. API SP test limits
    • (3) Or one year, whichever comes first
    • Approved and Licensed Specifications:
    • ILSAC GF-6
    • Exceeds API SP/SN PLUS/SN/SM
    • Meets engine test requirements of Chrysler MS 6395
    • Meets Ford WSS-M2C945-B1
    • Meets Ford WSS-M2C960-A1
See More

Pennzoil – Platinum 5W-30 Full Synthetic Motor Oil, Maximizes Engine Protection, 1 Quart (Part No.550022689)

Platinum 5W-30 Full Synthetic Motor Oil, Maximizes Engine Protection, 1 Quart

from

$11.49
Pennzoil Platinum Full Synthetic 5W-30 is designed to maximize engine protection and is backed by a 15,000-mile protection guarantee (see Warranty Information below) to protect your pursuit of every mile. Made with natural gas, it is formulated for complete protection for top engine performance. Pennzoil Platinum offers cleaner pistons (based on Sequence IIIH results), helps protect engines from loss of power, delivers better fuel economy (based on the latest industry standard), provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides excellent performance in extreme temperatures. (Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:
  • Full synthetic 5W-30 motor oil that is made with natural gas and designed to maximize engine protection
  • Backed by a 15,000-mile protection guarantee to protect your pursuit of every mile
  • Provides better fuel economy (based on the latest industry standards)
  • Keeps pistons cleaner than required by the toughest industry standard (based on Sequence IIIH results)
  • Designed for high-performance engines
  • Formulated to provide faster low-temperature oil flow and protection in extreme heat
  • Helps protect engines from loss of power
  • Meets or exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving, and all previous categories; ILSAC GF-6A
  • Meets or exceeds the following OEM requirements: Chrysler MS-6395, MS-13340; GM dexos1 Gen. 3; Ford WSS-M2C961-A1
  • For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual
See More

Mobil 1 – High Mileage 5W-30 Full Synthetic Motor Oil, Protection For 10K Miles, 5 Quart (Part No.120769)

High Mileage 5W-30 Full Synthetic Motor Oil, Protection For 10K Miles, 5 Quart

from

$37.99
Give your higher mileage engine the care it deserves with Mobil 1 High Mileage full-synthetic motor oil 5W-30. This formula utilizes Mobil 1s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness to vehicles with over 75,000 miles. Mobil 1 High Mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup-keeping critical engine parts clean and protected for up to 10,000 miles between oil changes.

Product Features:


    Product Features:
    • Mobil 1 High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes
    • Utilizes Mobil 1s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
    • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
    • Provides excellent internal engine heat protection (up to 500 Degrees F) and low temperature protection (to -30 Degrees F)
    • Mobil 1 is specially formulated to help remove sludge and lower engine temperatures
    • Manufacturer Part Number: 120769
    • Extended Engine Life: This high mileage motor oil extends engine life by reducing friction and preventing deposits and sludge buildup, keeping critical engine parts clean and protected for up to 10,000 miles between oil changes.
    • Temperature Control: Proven to cool engine temperatures by over 10%, Mobil 1 helps to keep your engine running at lower temperatures compared to conventional oil.
    • Oxidation Control: Mobil 1 High Mileage motor oil helps control oxidation to prevent oil breakdown, ensuring long-lasting performance and protection.
    • Versatile Compatibility: Recommended by ExxonMobil for all types of modern cars, SUVs, light vans, and light trucks, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines.
See More

Pennzoil – Platinum 5W-20 Full Synthetic Motor Oil, Maximizes Engine Protection, 1 Quart (Part No.550022686)

Platinum 5W-20 Full Synthetic Motor Oil, Maximizes Engine Protection, 1 Quart

from

$11.49
Pennzoil Platinum Full Synthetic 5W-20 is designed to maximize engine protection and is backed by a 15,000-mile protection guarantee to protect your pursuit of every mile. Made with natural gas, it is formulated for complete protection for top engine performance. Pennzoil Platinum offers cleaner pistons (based on Sequence IIIH results; does not apply to SAE 0W-16 or Pennzoil Platinum Euro motor oil), helps protect engines from loss of power, delivers better fuel economy (based on the latest industry standard), provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides excellent performance in extreme temperatures. (Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:
  • Full synthetic 5W-20 motor oil that is made with natural gas and designed to maximize engine protection
  • Backed by a 15,000-mile protection guarantee to protect your pursuit of every mile
  • Provides better fuel economy (based on the latest industry standards)
  • Keeps pistons cleaner than required by the toughest industry standard (based on Sequence IIIH results)
  • Designed for high-performance engines
  • Formulated to provide faster low-temperature oil flow and protection in extreme heat
  • Helps protect engines from loss of power
  • Meets or exceeds the following OEM requirements: Chrysler MS-6395; GM dexos1 Gen. 3; Ford WSS-M2C960-A
  • Meets or exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving and all previous categories; ILSAC GF-6A.
  • For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual
  • Complete Engine Protection: Provides protection against abnormal combustion phenomena like low-speed pre-ignition in modern turbocharged gasoline direct injection (TGDI) engines.
See More

Pennzoil – Ultra Platinum 5W-20 Full Synthetic Motor Oil, Unbeatable Engine Protection, 1 Quart (Part No.550040863)

Ultra Platinum 5W-20 Full Synthetic Motor Oil, Unbeatable Engine Protection, 1 Quart

from

$12.99
Pennzoil Ultra Platinum Full Synthetic 5W-20 motor oil is our most advanced formulation with unbeatable wear and sludge protection, as well as unbeatable cleanliness. When it comes to torturous driving conditions, trust the unbeatable engine protection of Pennzoil Ultra Platinum. It far exceeds the most stringent car manufacturer requirements for cleanliness and protection (based on ILSAC GF-6); it offers outstanding performance in extreme temperatures and better fuel economy (based on the latest industry standard). Pennzoil Ultra Platinum helps extend the life of your engine and protects for up to 20 years or 750,000 miles, whichever comes first, to give you peace of mind to drive every mile as hard as you can, from your daily commute to sand dunes and mountain terrain (Based on Sequence IVA wear test; Sequence IIIH oxidation and deposit test; and the Sequence VH sludge test. Pennzoil Ultra Platinum Lubrication Limited Warranty: Up to 20 years or 750,000 miles, whichever comes first, if you exclusively use Pennzoil Ultra Platinum Full Synthetic motor oil. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. To maintain your warranty, change your vehicles oil and oil filter at least as often as recommended by the vehicle manufacturer. Enrollment required. Keep your receipts. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:
  • Our most advanced full synthetic 5W-20 engine oil, designed for unbeatable engine protection
  • Pennzoil Ultra Platinum comes with a 20-year, 750,000 mile warranty to protect your engine and give you peace of mind to drive every mile as hard as you can
  • Made with natural gas
  • Outstanding performance in extreme temperatures
  • Designed for high-performance engines, it helps protect engines from loss of power
  • Provides unsurpassed wear protection for your engine (based on Sequence IVA wear test using SAE 5W-30)
  • Provides better fuel economy (based on the latest industry standard)
  • Exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving, and all previous categories; ILSAC GF-6A; ACEA A1/B1
  • Meets or exceeds the following OEM requirements: Chrysler MS-6395; WSS-M2C960-A1
  • For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual
  • Exceeds Stringent Requirements: This full synthetic motor oil far exceeds the most stringent car manufacturer requirements for cleanliness and protection, based on ILSAC GF-6 standards.
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Friction Modifier / Posi Additive (Part No.15018)

Friction Modifier / Posi Additive

from

$17.99
Help keep positraction chatter down with posi additive from Yukon Gear & Axle.

Product Features:
  • positraction additive
  • For use in any clutch-style limited slip
See More

Pennzoil – Platinum 5W-20 Full Synthetic Motor Oil, Boosts Fuel Economy (Part No.550038332)

Platinum 5W-20 Full Synthetic Motor Oil, Boosts Fuel Economy

from

$37.99
Pennzoil Platinum full synthetic SAE 5W-20 motor oil is uniquely engineered from our revolutionary PurePlus gas-to-liquid technology, which is a patented process that converts pure natural gas into a high quality, full synthetic base oil. Our high-quality base oil is 99.5% pure, contains fewer impurities than base oils made from crude oil, and when combined with our advanced additive technology, creates one of the best formulations in our Pennzoil portfolio. Pennzoil Platinum full synthetic SAE 5W-20 motor oil is licensed and meets the vehicle warranty requirements of GM’s dexos 1 Gen 2 specifications that are set forth to meet today’s modern engine technologies. This means that our Pennzoil Platinum full synthetic products meet the stringent requirements of leading car manufacturers. Why does this matter? Modern engine technologies have evolved over the years and today’s engine parts have reached an unprecedented level of fine manufacturing tolerances which require a high-quality engine oil to help provide complete engine protection. This includes protection against abnormal combustion phenomenon like low-speed pre-ignition observed in modern turbocharged gasoline direct injection (TGDI) engines.

Product Features:
  • Engineered to provide a high-quality base oil using our revolutionary PurePlus gas-to-liquid technology in combination with a high performance additive system
  • Helps protect against the effects of low speed pre-ignition (LSPI) in modern turbocharged engines
  • Provides better fuel economy which helps you drive an extra 550 miles per year vs a dirty engine
  • Offers unsurpassed wear protection by keeping engine parts from coming into contact
  • Delivers outstanding piston cleanliness, keeping pistons up to 50% cleaner than required by the toughest industry standards- based on Sequence IIIH engine test results
  • Specifications, Approvals and Recommendations: FCA MS-6395; Ford WSS-M2C945-B1; GM dexos1TM Gen 2
  • Exceeds the requirements of the following industry specifications: API SN PLUS, API SN-RC and all previous categories; ILSAC GF-5; ACEA A1/B1
  • For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual.
See More

Castrol – Edge 5W-20 Full Synthetic Motor Oil, Superior Wear Protection, 5 Quarts (Part No.15B9AD)

Edge 5W-20 Full Synthetic Motor Oil, Superior Wear Protection, 5 Quarts

from

$37.99
Castrol EDGE 5W-20 Full Synthetic Motor Oil is engineered for drivers seeking top-tier engine performance and protection. This advanced formula delivers 3X stronger viscosity breakdown resistance compared to leading full synthetics, ensuring durability under extreme conditions. With 10X better high-stress performance and the ability to last up to 20,000 miles or one year between oil changes, it offers exceptional value and convenience. Designed to excel in 7 critical areas, including fuel economy, high-temperature performance, sludge control, and wear protection, it meets or exceeds stringent industry standards such as API SQ/SP/SN PLUS/SN and ILSAC GF-7. Additionally, it fulfills the engine test requirements of Chrysler MS 6395 and Ford WSS-M2C945-B1/WSS-M2C960-A1, making it a reliable choice for a wide range of vehicles. With its 5W-20 SAE weight and full synthetic composition, this oil ensures optimal viscosity control and thermal stability, maximizing engine efficiency and longevity.

Product Features:


    Product Features:
    • 3X Stronger than the leading full synthetic (1)
    • 10X Better high stress performance (2)
    • 20,000 miles between oil changes (3)
    • (1) Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
    • (2) As measured in Seq IX test under high load/torque conditions vs. API SQ test limits
    • (3) Or one year, whichever comes first
    • Approved and Licensed Specifications:
    • Exceeds API SQ/SP/SN PLUS/SN
    • ILSAC GF-7
    • Meets engine test requirements of Chrysler MS 6395
    • Meets Ford WSS-M2C945-B1
    • Meets Ford WSS-M2C960-A1
See More

Motorcraft – 5W-20 Synthetic Blend Motor Oil, Superior Wear Protection, 5 Quart (Part No.XO-5W20-5Q3SP)

5W-20 Synthetic Blend Motor Oil, Superior Wear Protection, 5 Quart

from

$35.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft Synthetic Blend Oils meet ILSAC GF-5 and API certification requirements. Helps minimize engine deposits and wear while helping prevent oxidation and rust corrosion. Motorcraft SAE 5W-20 Synthetic Blend Motor Oil is a premium-quality passenger car motor oil recommended by Ford Motor Company and meets all warranty requirements. It is API Certified for gasoline engine service ILSAC GF-5 and meets API SN/Resource Conserving and SN PLUS. Motorcraft SAE 5W-20 Synthetic Blend Motor Oil is manufactured with high-viscosity index, premium-quality, synthetic/hydro processed base oils and specially designed performance additives, which help minimize engine deposits and wear, protect against high-temperature oxidation and turbocharger deposits, low-temperature gelling, rust corrosion and foaming.

Product Features:
  • Meets WSS-M2C945-B1 and SN PLUS, therefore it can reduce oil derived low speed pre-ignition
  • The friction-reducing technology in this motor oil provides superior wear protection and energy-conserving characteristics
  • Significant improvement in fuel economy when compared to SAE 5W-30 and 10W-30 motor oils
  • Ford Recommended: The only motor oil recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles, ensuring optimal performance and compatibility.
  • Premium Quality: Motorcraft SAE 5W-20 Synthetic Blend Motor Oil is manufactured with high-viscosity index, premium-quality synthetic/hydro processed base oils and specially designed performance additives.
  • Engine Protection: Helps minimize engine deposits and wear while protecting against high-temperature oxidation, turbocharger deposits, low-temperature gelling, rust corrosion, and foaming.
  • 5 Quart Convenience: Available in a convenient 5-quart container, making it easy to perform oil changes on your Ford, Lincoln, or Mercury vehicle.
See More

FRAM – 5W-30 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 5 Quart (Part No.F930-5QT)

5W-30 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 5 Quart

from

$27.99
FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 & is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:
  • Faster oil flow at start-up.
  • Fuel efficiency gains over heavier grade oils
  • Excellent sludge and varnish protection
  • Outstanding thermal and oxidation stability
  • Lowers oil vaporization and consumption at extreme conditions
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
  • Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
  • Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
  • Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
  • Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.
See More

Pennzoil – Platinum 5W-20 Full Synthetic Motor Oil, Maximizes Engine Protection, 5 Quart (Part No.550046122)

Platinum 5W-20 Full Synthetic Motor Oil, Maximizes Engine Protection, 5 Quart

from

$37.99
Pennzoil Platinum Full Synthetic 5W-20 is designed to maximize engine protection and is backed by a 15,000-mile protection guarantee to protect your pursuit of every mile. Made with natural gas, it is formulated for complete protection for top engine performance. Pennzoil Platinum offers cleaner pistons (based on Sequence IIIH results; does not apply to SAE 0W-16 or Pennzoil Platinum Euro motor oil), helps protect engines from loss of power, delivers better fuel economy (based on the latest industry standard), provides unsurpassed wear protection (based on Sequence IVA wear test using SAE 5W-30), and provides excellent performance in extreme temperatures. (Pennzoil Platinum Lubrication Limited Warranty: Protection for up to 15,000 miles or one year, whichever comes first. Use an oil filter designed for longer oil change intervals and follow OEM manual and vehicles oil life sensor to maintain OEM warranty. Excludes severe driving conditions, including racing and commercial use. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. Enrollment required. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:
  • Full synthetic 5W-20 motor oil that is made with natural gas and designed to maximize engine protection
  • Backed by a 15,000-mile protection guarantee to protect your pursuit of every mile
  • Provides better fuel economy (based on the latest industry standards)
  • Keeps pistons cleaner than required by the toughest industry standard (based on Sequence IIIH results)
  • Designed for high-performance engines
  • Formulated to provide faster low-temperature oil flow and protection in extreme heat
  • Helps protect engines from loss of power
  • Meets or exceeds the following OEM requirements: Chrysler MS-6395; GM dexos1 Gen. 3; Ford WSS-M2C960-A
  • Meets or exceeds the requirements of the following industry specifications: API SP, API SP-Resource Conserving and all previous categories; ILSAC GF-6A.
  • For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual
See More

FRAM – 5W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart (Part No.F620-5QT)

5W-30 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 5 Quart

from

$24.99
FRAM Engine Oil SAE 5W-30 utilizes a blend of high quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 5W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:
  • Low-speed pre-ignition control.
  • Chain wear protection
  • Piston cleanliness
  • Turbo-compatibility
  • Always refer to your vehicles operating manual to select the correct grade oil for your engine.
  • Reliable engine protection: FRAM Conventional Oil 5W30 5 QT utilizes a blend of high-quality conventional and synthetic base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions.
See More

Mobil Delvac 1 – ESP 5W-40 Full Synthetic Heavy Duty Diesel Engine Oil, 1 Gallon (Part No.44831)

ESP 5W-40 Full Synthetic Heavy Duty Diesel Engine Oil, 1 Gallon

from

$34.99
High performance heavy-duty diesel engine oil.

Product Features:
  • Advanced full synthetic diesel engine oil that helps to extend engine life and fuel economy potential of modern diesel engines operating in severe conditions
  • Formulated to help high-performance diesel engines with turbocharger, direct-injection, low-emission designs, and low-sulfur and biodiesel fuel formulations
  • Provides excellent oxidation performance, anti-wear, and anti-scuff properties that helps to reduce engine deposits and keep engines running reliably
  • Excellent low-temperature performance for increased oil flow to critical bearing surfaces at startup and controlling low-temperature sludge formation
  • Provides outstanding protection against oil thickening and degradation, helping to reduce the number of oil changes and oil disposal needs
  • Manufacturer Part Number: 122271
See More

Castrol – Edge High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 5 Quart (Part No.15906E)

Edge High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 5 Quart

from

$37.99
Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:


    Product Features:
    • Phosphorus Replacement Technology to help extend the life of the emission system
    • Reduces leaks, oil burnoff and power robbing deposits
    • 15,000 miles between oil changes (1)
    • (1) Or one year, whichever comes first
    • Meets or exceeds the following specifications:
    • API SP/SN PLUS/SN/SM
    • ILSAC GF-6
    • Meets Ford WSS-M2C947-B1
    • Meets engine test requirements of Chrysler MS 6395
    • Meets Ford WSS-M2C961-A1
See More

Castrol – GTX High Mileage 5W-20 Synthetic Blend Motor Oil, Reduces Sludge & Wear, 1 Quart (Part No.15B6E6)

GTX High Mileage 5W-20 Synthetic Blend Motor Oil, Reduces Sludge & Wear, 1 Quart

from

$9.49
Castrol® GTX® High Mileage 5W-20 Synthetic Blend Motor Oil is the ultimate choice for extending engine life in high-mileage vehicles. Engineered with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage. This premium synthetic blend offers superior dispersancy to combat sludge buildup, exceptional protection against oil burn-off, and advanced additives to minimize engine wear. Seal conditioners work to reduce leaks, while its formulation improves fuel economy, meeting stringent API SP, ILSAC GF-6, and Ford specifications. Designed to exceed industry standards, this 5W-20 motor oil ensures reliable performance and durability, making it a smart investment for maintaining your vehicle’s efficiency and longevity.

Product Features:


    Product Features:
    • Phosphorus Replacement Technology helps extend emission system life
    • Superior dispersancy that fights sludge build up
    • Exceptional oil burn-off protection exceeding industry standards (1)
    • Seal conditioners to help reduce leaks
    • Advanced additives that minimize engine wear
    • Improved fuel economy (2)
    • (2) Based on API and ACEA volatility specifications
    • (2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
    • Meets or exceeds the following specifications:
    • API SP/SN PLUS/SN/SM
    • ILSAC GF-6
    • Meets Ford WSS-M2C945-B1
    • Meets Ford WSS-M2C960-A1
See More

Valvoline – Advanced Full Synthetic 5W-30 Engine Oil, Maximizes Engine Life, 1 Quart (Part No.VV955)

Advanced Full Synthetic 5W-30 Engine Oil, Maximizes Engine Life, 1 Quart

from

$11.49
Today’s advanced engine technology requires advanced protection. Valvoline Advanced Full Synthetic, the motor oil designed to protect today’s sophisticated engines, contains premium anti-wear additives, superior antioxidants and extra detergents. It protects 40% better against wear, resists oil breakdown 10-times better, and defends 25% more against deposits than industry standards for maximum performance and engine longevity. And with an exceptional range of temperature protection your engine will ready for extreme weather. Valvoline invented motor oil 150 years ago, and we’ve been reinventing it ever since. Get Valvoline Advanced Full Synthetic and give your engine the advanced protection proven to maximize engine life.

Product Features:
  • Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
  • 40% better wear protection vs. industry standard as tested in the sequence ivb engine test
  • 25% better deposit protection with superior engine cleaning detergents as tested in the gmod engine test
  • Exceptional high/low temperature protection defends your motor no matter the weather conditions
  • Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn, gm dexos 1 gen 3
  • Superior engine protection: Valvoline SynPower Full Synthetic Engine Oil provides superior protection against engine sludge and varnish, ensuring your engine stays clean and running smoothly.
See More

Royal Purple – SAE 0W-20 Synthetic Motor Oil, Superior Protection & Performance, 5 Quart (Part No.51020)

SAE 0W-20 Synthetic Motor Oil, Superior Protection & Performance, 5 Quart

from

$41.99
Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.

Product Features:
  • Better wear protection
  • Increased fuel efficiency
  • Better protection of the expensive catalytic emission system
  • Improved compatibility with fuels containing ethanol
  • Superior corrosion protection
  • High Performance: SAE 0W-20 Synthetic Engine Oil is specially formulated to provide high performance for gasoline and diesel engines of all types, including cars, trucks, SUVs, motorcycles, and boats.
See More

Motorcraft – Synthetic Blend 5W-30 Engine Oil, Improves Fuel Economy, 1 Quart (Part No.XO-5W30-Q1SP)

Synthetic Blend 5W-30 Engine Oil, Improves Fuel Economy, 1 Quart

from

$8.49
MOTORCRAFT Synthetic Blend 5W30 Motor Oil is a premium-quality engine oil that is recommended by Ford Motor Company and meets all warranty requirements. This oil is API Certified for gasoline engine service ILSAC GF-6 and meets API SP/Resource Conserving and SN PLUS. It is a synthetic blend oil that provides improved protection against engine wear, deposits, and oil breakdown. The friction-reducing technology in this motor oil helps to improve fuel economy and reduce engine wear. This oil also meets WSS-M2C961-A1. It is the original equipment for Ford Motor Company vehicles and is a standard oil class with a SAE oil weight of 5W-30. If you own a Ford vehicle, this is the perfect engine oil to keep your engine running smoothly and efficiently.

Product Features:
  • Motorcraft sae 5w-30 synthetic blend engine oil is manufactured with high-viscosity index, premium-quality, synthetic/hydroprocessed base oils and specially designed performance additives,
  • Additives provides improved protection against engine wear, and deposits, oil thickening and oil derived low speed pre-ignition, while continuing to prevent turbocharger deposits, low-temperature gelling, rust, corrosion and foaming
  • The friction-reducing technology in this engine oil provides superior wear protection and energy-conserving characteristics, which result in improvement in fuel economy when compared to sae 10w-30 engine oils.
  • This oil also meets wss-m2c961-a1
  • Premium Quality: Motorcraft SAE 5W-30 Synthetic Blend Engine Oil is a premium-quality passenger car engine oil that meets all warranty requirements recommended by Ford Motor Company.
  • API Certified: This engine oil is API Certified for gasoline engine service ILSAC GF-6 and meets API SP/Resource Conserving and SN PLUS, ensuring that it meets the highest industry standards.
See More

FRAM – High Mileage 5W-20 Conventional Motor Oil, Helps Reduce Leaks, 5 Quart (Part No.F662-5QT)

High Mileage 5W-20 Conventional Motor Oil, Helps Reduce Leaks, 5 Quart

from

$24.99
FRAM Conventional High Mileage 5W-20 Engine Oil is specially designed with enhanced additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W20 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W20 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:
  • Formulated with a unique combination of premium base oils and an enhanced additive system.
  • Provides increased protection in higher mileage engines
  • Helps restore seal condition to reduce oil consumption
  • Increases protection against high temperature deposits and ring sticking
  • ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
  • Sludge Cleanup and Engine Efficiency: Formulated to help clean out sludge buildup, keeping engines running clean with increased efficiency and power.
  • Versatile Compatibility: Protects domestic and imported vehicles and equipment powered by gasoline or light-duty diesel engines, including turbocharged and supercharged engines.
  • Meets Stringent Standards: Meets or exceeds all new car manufacturers’ warranty requirements and stringent industry standards API SP/CF, and ILSAC GF-6A Resource Conserving Service Category.
See More

Helping You Find the Right Oil and Lubricants for Your Ford Transit-250

You love your Transit-250. So we’ve made it easier than ever to help you find Ford Transit-250 Oil and Lubricants in our online catalog. Our inventory holds 88 aftermarket and OEM Oil and Lubricants for your Ford Transit-250, ranging from $6.29 to $149.99.

We offer parts from 12 brands trusted to make quality Oil and Lubricants for your Ford Transit-250. Before you buy, take some time to read through customer reviews. We currently have 307,167 reviews of Ford Transit-250 Oil and Lubricants from previous customers. Some of the top rated parts include Platinum 5W-20 Full Synthetic Motor Oil, Boosts Fuel Economy with 4.8 stars and Advanced 5W-30 Full Synthetic Motor Oil, Extends Engine Life, 1 Quart with 4.9 stars.

Find your Transit-250 Oil and Lubricants here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Transit-250 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Oil and Lubricants Brands for Your Ford Transit-250

Our inventory holds Oil and Lubricants for your Ford Transit-250 from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like Mobil Oil, Castrol, and Fram, all of which can keep that Ford happy.

Top-Rated Pennzoil Oil and Lubricants

Leading Pennzoil Oil and Lubricants

We carry Pennzoil brand parts for your Ford Transit-250 across several catalog categories, including Motor Oil and Lubricants. Some of our most reviewed Pennzoil parts include:

FAQs for Ford Transit-250 Oil and Lubricants

What are the most purchased Oil and Lubricants for the Ford Transit-250?

Out of 88 Oil and Lubricants for the Ford Transit-250, the most popular in our inventory are:

What are the top-rated Ford Transit-250 Oil and Lubricants?

Top-rated Oil and Lubricants for your Ford Transit-250 based on customer reviews/ratings are:
Platinum 5W-20 Full Synthetic Motor Oil, Boosts Fuel Economy
from $37.99
(2220)
Platinum 5W-20 Full Synthetic Motor Oil, Boosts Fuel Economy
“Use it in our town and country and keeps the motor nice and quiet”