Name: Multi-Use Connector
Brand: Carquest Premium
SKU: PTA1346
Price: 41.99 USD

from

$41.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$76.99

Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.

Product Features:

Provides closure for the EVAP system (normally vented) during OBD II test cycle
Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
Meets or exceeds all OEM specifications

from

$75.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$311.99

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

Product Features:

Reduces Throttle Response Time
Improves Acceleration
Easy To Install
Does Not Affect The Vehicles Electronic System

from

$304.99

Keep the diesel emissions system in top running condition by replacing the diesel exhaust fluid (DEF) injector. Extreme temps and contaminants can foul the DEF injector, leading to engine warning lights and failed emissions inspections.

Product Features:

Direct replacement – this DEF injector installs in place of the original with no wiring modifications or additional hardware
Saves money – replace only the worn injector, not the exhaust assembly
Complete set – includes new injector, O-rings and hold-down clip
Quality assured – has undergone fitment and validation testing to ensure quality and performance

from

$64.99

Vpr Cnistr Purg Valv

from

$358.99

The factory DEF heater on certain vehicles often fails from fluid intrusion. This Dorman OE FIX solution modifies the OEM design to address this failure point and increase reliability.

Product Features:

Upgraded replacement – this diesel exhaust fluid (DEF) heater features additional protection from fluid intrusion
Restores performance – designed to match the fit and function of the original equipment part
Thoroughly tested – each design undergoes cyclical heater element fatigue testing
Trustworthy quality – backed by team of engineers in the United States

from

$96.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.. Each component is precision-built for exact replacementâ¿¦ and a first time fit.. DENSO gives you the right part and the right fitâ¿¦ the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$51.99

Make better electrical repairs and accessory installations with this versatile and durable pigtail connector. It allows quick circuit disconnections for service, and is engineered for reliable performance.

Product Features:

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$46.49

BWD is an aftermarket leader, providing a premium line of engine management products. We are constantly evolving to give BWD customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our distributor caps are made of high dielectric strength, glass/mineral reinforced polyester resin for less carbon tracking, greater resistance to electrical breakdown, and superior performance
Solid brass terminals (where available) make better connections and greater resistance to electrical pitting and corrosion
RFI resistors where specified to eliminate radio static and potential ECU-damaging spikes

from

$137.99

Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$92.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$31.99

The only parts recommended by Ford Motor Company for Ford and Lincoln vehicles. Motorcraft Seals are designed and tested to Ford’s rigorous engineering standards. Motorcraft parts fit right the first time for quicker, easier installation.

from

$479.99

This diesel exhaust fluid (DEF) pump matches the fit and function of the original part. Designed as a plug-and-play replacement, this DEF pump has undergone extensive testing and is made of quality components for reliable service.

Product Features:

Ideal replacement – this DEF pump matches the fit and function of the original pump for a plug-and-play replacement
Durable construction – this DEF pump is made of quality components and materials for durability
Cost-effective solution – offers original equipment function at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$135.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$13.99

This diesel exhaust fluid (DEF) filler cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this diesel exhaust fluid (DEF) filler cap is designed to match the fit and function of the original cap on specified vehicles
Restores functionality – reliable replacement for an original cap that is leaking or failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$85.99

Original equipment fuel pumps often stop working when the modules cannot handle capacity and transistors on the PCB fail. This Dorman OE FIX replacement upgrades the internal hardware for increased current capacity and greater reliability.

Product Features:

Upgraded replacement – this fuel pump relay module features enhanced internal hardware for greater reliability
Failure-resistant design – increased current capacity in module prevents future transistor failure
Application specific – made for certain Ford, Lincoln and Mercury vehicles
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$69.99

Wire Assembly

from

$499.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$5.29

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$122.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$56.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

from

$169.99

Carquest Premium exhaust gas recirculation (EGR) valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Our Carquest Premium EGR valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium EGR valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium EGR valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$51.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$186.99

This vacuum pump matches the fit and function of the original equipment pump. Made of durable materials for reliable service, this replacement pump is built to ensure reliable operation of vacuum-operated vehicle functions.

Product Features:

Ideal replacement – this vacuum pump matches the fit and function of the original equipment pump to restore operation of vacuum-operated functions
Durable construction – this vacuum pump is made of quality materials to ensure reliable performance and a long service life
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit