Ford Thunderbird Air Intakes

Essential Ford Thunderbird Air Intakes

Edelbrock – Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors (Part No.12403)

Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors

from

$43.99
The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly

Product Features:
  • Multi-Color
  • Plastic Material
  • Fits Holley® 2300, 4150, And 4160 Carburetors
  • Set of 8
  • Made In The USA
See More

Edelbrock – Performer Carburetor Calibration Kit #1487 for #1406 Carburetors (Part No.1487)

Performer Carburetor Calibration Kit #1487 for #1406 Carburetors

from

$66.99
Product Features:
  • Customize Carburetor Calibration and Performance
  • Owners Manual has Assembly Help
  • Includes Metering Rod Retaining Spring
  • Includes Metering Rods
  • Includes Metering Jets
  • Includes Step-Up Springs
See More

Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)

Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip

from

$18.99
Product Features:
  • The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
  • Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.
See More

Edelbrock – Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415 (Part No.12415)

Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415

from

$22.99
Edelbrock part #12415 Fuel Bowl Inverted Flare Fitting is a 3/8″ inverted flare fuel inlet fitting. The fitting is designed for use with Holley 2300, 4150, 4150HP and 4160 (center hung floats only), 4500, 4500HP and Rochester Quadrajet applications up to

Product Features:
  • Brass Material
  • 3/8 in. Single Barb
  • 7/8-20 in. Male End
  • 5/8-18 in. Female Flare
  • With 3/8 in. Tube
See More

Carquest Premium – Multi-Use Connector (Part No.PTA1279)

Multi-Use Connector

from

$16.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
  • Product constructed to meet all design and operating characteristics as intended by the manufacturer.
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Dorman – Electronic Throttle Body: New (Part No.977-600)

Electronic Throttle Body: New

from

$703.99
When a vehicle idles erratically, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This replacement electronic throttle body is designed to match the performance of the original equipment unit on specified vehicles and is built from high-quality materials with exacting standards to help prevent future failures.

Product Features:
  • Direct replacement – this replacement electronic throttle body is designed to match the performance of the original equipment throttle body on specified vehicles
  • Ideal solution – engineered to help restore proper engine performance when the factory throttle body is malfunctioning due to oil ingress or dirt and carbon buildup, resulting in DTCs and erratic idle
  • Durable construction – features high-quality materials engineered and manufactured to exacting standards to help prevent future failures
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

NTK – Throttle Position Sensor (Part No.TH0098)

Throttle Position Sensor

from

$42.99
The Throttle Position Sensor (TPS) reports the angle of the throttle plate and thus the engine air intake to the ECM for optimal engine operation under all engine load conditions. Located on the throttle body, a failed Throttle Position Sensor may result in poor engine performance including stalling, hesitation, rough idle, increased fuel consumption, unnecessary stress on the emissions system and check engine light illumination.

Product Features:
  • OE MATCH: Throttle Position Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper feedback to the ECU to control engine performance.
  • THE DIFFERENCE: Magnet size and strength optimized for precise output signal. 100% thermo-shock and vibration tested to ensure the best performance in extreme conditions.
See More

Edelbrock – Carburetor Throttle Cable Bracket #1495 For Ford 429/460 Big-Block (Part No.1495)

Carburetor Throttle Cable Bracket #1495 For Ford 429/460 Big-Block

from

$26.99


Product Features:
  • Repositions Stock Throttle Cable Bracket
  • Use With PN[1483]
  • Use w/Stock Throttle Cable Bracket
  • For Fords w/Cable Activated Throttles
  • Fords w/Automatic Transmission Kickdown Rod
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90145)

Engine Intake Manifold Gasket Set

from

$26.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Air Cleaner Mounting Gasket (Part No.60038)

Air Cleaner Mounting Gasket

from

$4.29
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Mr. Gasket – Intake Manifold Bolts (Part No.958G)

Intake Manifold Bolts

from

$22.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers

Product Features:
  • Hex Head
  • Zinc Plated
  • Ideal For Minimal Space
  • 12-Point Head And Flange
  • Zinc Plated For Protection
See More

Dorman – Help – Air Cleaner Hold-Down Clamp Assortment (Part No.41101)

Air Cleaner Hold-Down Clamp Assortment

from

$15.99
This air cleaner fastener is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this air cleaner fastener is designed to match the fit and function of the original part on specified vehicles
  • Ideal solution – this fastener is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Fuel Injection Throttle Body Cover Gasket (Part No.61797)

Fuel Injection Throttle Body Cover Gasket

from

$12.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Edelbrock – Throttle Lever #1483 For Ford 1968 And Later, Gold Iridited Finish (Part No.1483)

Throttle Lever #1483 For Ford 1968 And Later, Gold Iridited Finish

from

$40.99
Product Features:
  • Converts Throttle Lever on Carb for Proper Use
  • For Edelbrock Performer Series Carburetors Only
  • Also Accepts Cruise Control
  • Use with Appropriate Throttle Cable Plate
See More

Wells Vehicle Electronics – Carburetor Choke Thermostat (Part No.2C1220)

Carburetor Choke Thermostat

from

$11.49
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:
  • Application matched components ensure carburetor can be returned to like new condition.
See More

MAHLE Original – Fuel Injection Throttle Body Mounting Gasket (Part No.G31844)

Fuel Injection Throttle Body Mounting Gasket

from

$10.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)

Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl

from

$14.99
The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:
  • Fits Holley® Carburetors With Center Hung Fuel Bowl
  • Includes Adjusting Nut
  • Includes Locking Screw
  • Includes O-Ring
  • Includes Washers
See More

Edelbrock – Pro-Flo Chrome 14" Round Air Cleaner with 3" Paper Element (Deep Flange) (Part No.1221)

Pro-Flo Chrome 14" Round Air Cleaner with 3" Paper Element (Deep Flange)

from

$46.99
Stamped from 18 gauge steel. Triple-chrome plated. High quality finish. Great looks. Works with all 5.152 inch carburetors. Base knock-outs for use with crankcase ventilation.

Product Features:
  • Stamped From 18-Gauge Steel
  • Triple-Chrome Plated
  • High-Quality Finish
  • Great Looks
  • Works With All 5.125 in. Carbs
  • Base Knock-Outs For Use w/Crankcase Ventilation
See More

Felpro – Carburetor Mounting Gasket (Part No.60101)

Carburetor Mounting Gasket

from

$10.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Edelbrock – Standard Flow Carburetor Power Valve #12635 Single Stage 3.5in Hg (Part No.12635)

Standard Flow Carburetor Power Valve #12635 Single Stage 3.5in Hg

from

$17.99
The Edelbrock #12635 Single Stage 3.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation

Product Features:
  • Gasket Or Seal Included
  • 3.5 in. Hg Opening Vacuum
  • Single Stage
  • Standard Flow Type
  • Made In The USA
See More

Edelbrock – Engine Intake Manifold Spacer #8728 For Manifold Part #2945, 3887 (Part No.8728)

Engine Intake Manifold Spacer #8728 For Manifold Part #2945, 3887

from

$191.99


Product Features:
  • Fiber Laminate Spacers
  • Provide Heat Insulation Between Upper and Lower
  • Creates Cooler/Denser Charge
  • Raise Intake 0.5in. For More Valve Cover Clearance
  • Includes all Necessary Hardware for Installation
See More

Delphi – Fuel Injection Idle Air Control Valve (Part No.CV10140)

Fuel Injection Idle Air Control Valve

from

$78.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Delphi’s 100% OE replacement idle air control valves allow for accurate, stable, and precise air flow during the idle phase
  • Provides superior fit resulting in an easier installations
  • Maximizes fuel and engine efficiency
  • Manufactured and engineered with premium quality and stringent standards eliminating potential for malfunctions
See More

Carquest Premium – Fuel Injector Seal Kit (Part No.AS009)

Fuel Injector Seal Kit

from

$3.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:
  • Premium OE quality materials
  • Services one injector
See More

Edelbrock – Carburetor Gasket Kit #12371 Fits 4160 Carburetors (Part No.12371)

Carburetor Gasket Kit #12371 Fits 4160 Carburetors

from

$20.99
The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:
  • Nitrile Rubber Material
  • Metering Block Type
  • Set of 4
  • Fits Holley® 4160 Carburetors
  • Made In The USA
See More

Edelbrock – Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs (Part No.12370)

Carburetor Gasket Kit #12370 Fits 2300, 4150, 4160, 4165, And Some 4500 Carbs

from

$20.99
The Edelbrock #12370 comes with fuel bowl and metering block gaskets. The Edelbrock #12370 is designed to be used with Holley 2300, 4150, 4160, 4165, and some 4500 carburetors.

Product Features:
  • Nitrile Rubber Material
  • Metering Block, Fuel Bowl Type
  • Set of 4
  • Fits Holley® 2300, 4150, 4160, 4165, And Some 4500 Carburetors
  • Made In The USA
See More

Helping You Find the Right Air Intakes for Your Ford Thunderbird

You love your Thunderbird. So we’ve made it easier than ever to help you find Ford Thunderbird Air Intakes in our online catalog. Our inventory holds 247 aftermarket and OEM Air Intakes for your Ford Thunderbird, ranging from $1.89 to $2,126.99.

We offer parts from 15 brands trusted to make quality Air Intakes for your Ford Thunderbird. Before you buy, take some time to read through customer reviews. We currently have 5,507 reviews of Ford Thunderbird Air Intakes from previous customers. Some of the top rated parts include Plastic Intake Manifold – Includes Gaskets with 4.0 stars and Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange) with 4.9 stars.

Find your Thunderbird Air Intakes here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Thunderbird part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Air Intakes Brands for Your Ford Thunderbird

Our inventory holds Air Intakes for your Ford Thunderbird from 15 trusted brands. You’ll find OEM and aftermarket parts from brands like FELPRO, Carquest Premium, and Edelbrock, all of which can keep that Ford happy.
We have Idemitsu parts available for your Ford Thunderbird in categories like Intake Manifold Parts. Some of the top-rated Idemitsu parts in these categories are:
Type TLS Automatic Transmission Fluid, 1 Quart
from $14.49
(2)
Type TLS Automatic Transmission Fluid, 1 Quart
Intake Manifolds

Top-Rated Edelbrock Air Intakes

Leading Edelbrock Air Intakes

We carry Edelbrock brand parts for your Ford Thunderbird across several catalog categories, including Carburetor Parts and Air Cleaner Parts. Some of our most reviewed Edelbrock parts include:

FAQs for Ford Thunderbird Air Intakes

What are the most purchased Air Intakes for the Ford Thunderbird?

Out of 247 Air Intakes for the Ford Thunderbird, the most popular in our inventory are:
Air Cleaner Mounting Gasket
from $4.29
(39)
Air Cleaner Mounting Gasket
Air Cleaner Mount Gaskets
Coolant Temperature Sensor
from $32.99
This product is not rated
Coolant Temperature Sensor
Intake Manifold Temperature Sensors
Throttle Position Sensor
from $45.99
This product is not rated
Throttle Position Sensor
Throttle Position Sensors

What are the top-rated Ford Thunderbird Air Intakes?

Top-rated Air Intakes for your Ford Thunderbird based on customer reviews/ratings are:
Plastic Intake Manifold - Includes Gaskets
from $307.99
(46)
Plastic Intake Manifold – Includes Gaskets
“Fit perfect!!! Easy to install”
Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange)
from $50.99
(9)
Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange)
“Black is the key word on this 1979 Corvette. I’ve found every performance part imaginable ready to go in black I’m going with a Demon carburetor with”
Engine Intake Manifold Gasket Set
from $24.99
(8)
Engine Intake Manifold Gasket Set
“Similar to high-end racing type intake gaskets at a much lower price. Silicone rubber with steel core. End pieces are molded silicone rubber instead”