Ford P-350 Fuel and Emissions Systems
Top Ford P-350 Fuel and Emissions Systems Categories
We carry over 19 Fuel and Emissions Systems in inventory for the Ford P-350. If you’re looking for aftermarket Fuel and Emissions Systems for your Ford P-350, check out all these categories:
Essential Ford P-350 Fuel and Emissions Systems
Delphi – Electric Fuel Pump: Bracket, Nut/Bolt, Rubber Hoses, Splices, Terminal Hardware (Part No.FD0038)
from
$52.99
Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Holley – Keith Dorton Series; VoluMax Race Series Fuel Pump (Part No.12-289-20)
from
$255.99
Keith Dorton Series VoluMax race series fuel pump made from heavy duty construction for continuous high RPM operation. Redesigned high flow valves always ensure adequate fuel delivery. Fuel pressure regulator is required. Fuel body casting can be rotated
Product Features:
See More
Product Features:
- High Output Fuel Flow
- Flows 170+ gph Free Flow
- Shutoff Pressure Pre-Set At 8 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Redesigned High Flow Valves Always Ensure Adequate Fuel Delivery
- Fuel Body Casting Can Be Rotated For Plumbing Situations
- Inlet And Outlet Tapped For 3/8 in. NPT
Carquest Premium – Mechanical Fuel Pump: Includes Gasket (Part No.3541153)
from
$66.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Holley – Mechanical Fuel Pump (Part No.12-833)
from
$139.99
Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.
Product Features:
See More
Product Features:
- Street Performance
- Flows 80 gph Free Flow
- Shutoff Pressure Pre-Set 7.5 PSI
- Fuel Pressure Regulator Is Not Required
- Heavy Duty Construction For Continuous High rpm Operation
- Fuel Body Casting Can Be Rotated For Various Plumbing Situations
- Inlet And Outlet Tapped For 1/4 in. NPT
- Inlet/Outlet Tapped For .25 in. NPT
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$3.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Edelbrock – Pro-Flo 4 EFI Traditional 4150-Style Kit No. 35960 For Ford BB FE 390-428 (Part No.35960)
from
$2914.99
The Edelbrock Pro-Flo 4 XT EFI Kit No. 35960 for Ford FE 390-428 C.
Product Features:
See More
Product Features:
- The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure
- Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
- The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
- It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
- We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
- The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
- The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
- E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
- The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet
Carquest Premium – Multi-Use Connector (Part No.FSA1013)
from
$19.79
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Fuel Tank Selector Valve (Part No.ECC2955)
from
$173.99
The electronic universal fuel tank selector is a two-way valve designed to direct fuel from a single tank when commanded, on a dual fuel tank vehicle application. With aid from an electrical switch located inside the vehicle cabin, the vehicle operator can select one of two fuel tanks to provide fuel to the vehicle’s engine. When electrically connected correctly, the selector valve will also provide the fuel level sender signal from each fuel tank onto the instrument cluster fuel gauge.
Product Features:
See More
Product Features:
- Product constructed to provide long-life operation
Carquest Premium – Fuel Tank Selector Valve: 6 Ports, with Toggle Switch, with Pigtail Connector (Part No.FSC1011)
from
$102.99
The electronic universal fuel tank selector is a two-way valve designed to direct fuel from a single tank when commanded, on a dual fuel tank vehicle application. With aid from an electrical switch located inside the vehicle cabin, the vehicle operator can select one of two fuel tanks to provide fuel to the vehicle’s engine. When electrically connected correctly, the selector valve will also provide the fuel level sender signal from each fuel tank onto the instrument cluster fuel gauge.
Product Features:
See More
Product Features:
- Product constructed to provide long-life operation
- 6 Ports
- Universal
- Includes: Selector Valve, Toggle Switch and Pigtail Connector
GM Genuine Parts – Fuel Tank Selector Valve (Part No.U7001)
from
$152.99
GM Genuine Parts Fuel Tank Selector Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Tank Selector Valve (Part No.U7000)
from
$108.99
GM Genuine Parts Fuel Tank Selector Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Fuel Tank Selector Valve (Part No.FSC1007)
from
$80.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Ford P-350 Fuel and Emissions Systems Categories
Helping You Find the Right Fuel and Emissions Systems for Your Ford P-350
You love your P-350. So we’ve made it easier than ever to help you find Ford P-350 Fuel and Emissions Systems in our online catalog. Our inventory holds 19 aftermarket and OEM Fuel and Emissions Systems for your Ford P-350, ranging from $3.99 to $2,914.99.
We offer parts from 6 brands trusted to make quality Fuel and Emissions Systems for your Ford P-350. Before you buy, take some time to read through customer reviews. We currently have 1,713 reviews of Ford P-350 Fuel and Emissions Systems from previous customers. Some of the top rated parts include Fuel Tank Selector Valve with 1.0 stars and Mechanical Fuel Pump with 1.0 stars.
Find your P-350 Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford P-350 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Fuel and Emissions Systems Brands for Your Ford P-350
Our inventory holds Fuel and Emissions Systems for your Ford P-350 from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Felpro, Delphi, and Carquest Premium, all of which can keep that Ford happy.
We have Felpro parts available for your Ford P-350 in categories like Fuel Pumps. Some of the top-rated Felpro parts in these categories are:
FAQs for Ford P-350 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the Ford P-350?
Out of 19 Fuel and Emissions Systems for the Ford P-350, the most popular in our inventory are:
What are the top-rated Ford P-350 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your Ford P-350 based on customer reviews/ratings are:
from
$152.99
(4)
Fuel Tank Selector Valve
“Bought this to replace the faulty one on our motor home. The number of gas lines is correct, but the old one only has one wire to it. The part comes w”
from
$139.99
(3)
Mechanical Fuel Pump
“leaked around the adjustable bolts returned and got a second one and it leaked in the same place.”
from
$108.99
(2)
Fuel Tank Selector Valve
“Cant’ really comment on the product too much yet. Don’t know if it works or not as it did not come with any instructions. Going on AC Delco’s website ”
