Ford P-350 Ignition and Tune-Up Products

Essential Ford P-350 Ignition and Tune-Up Products

Carquest Premium – Distributor T2897: 100% New, With Cap and Rotor (Part No.T2897)

Distributor T2897: 100% New, With Cap and Rotor

from

$114.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

Carquest Premium – Ignition Switch (Part No.CSC1624)

Ignition Switch

from

$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8307)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$35.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Distributor Cap (Part No.CAC1056)

Distributor Cap

from

$13.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Distributor Ignition Pickup (Part No.ME12)

Distributor Ignition Pickup

from

$43.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • High temperature enameled wires were specified for better insulation and performance
  • With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8102)

Spark Plug Wire Set: Carbon Core, 9 Wire Set

from

$52.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)

DISTRIBUTOR MOUNTING GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

ACDelco – Ignition Coil (Part No.U505)

Ignition Coil

from

$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$35.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP45)

Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration

from

$4.79
With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite delivers unmatched reliability. Designed and engineered in the USA, these spark plugs feature a high nickel alloy side electrode that maintains a precise gap and a full platinum tip that ensures virtually no gap erosion for extended life. The necked-down center electrode fires quicker and cleaner with less voltage, resulting in easier starts, quicker acceleration, and improved fuel economy compared to standard plugs. The tapered seat type further enhances performance and durability. For even greater performance, consider upgrading to Autolite Double Platinum or Iridium XP spark plugs.

Product Features:
  • High nickel alloy side electrode maintains precise gap
  • Full platinum tip assures virtually no gap erosion for long life
  • Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
  • Improved Fuel Economy: Designed to enhance fuel efficiency compared to standard spark plugs.
  • Tapered Seat Type: Enhances overall performance and durability.
See More

Carquest Premium – Ignition Tune-Up Kit (Part No.CBA1835)

Ignition Tune-Up Kit

from

$17.49
Ignition Tune-Up Kit

Carquest Premium – Ignition Module (Part No.CBJ1087)

Ignition Module

from

$49.99
CARQUEST Ignition Modules are built by an ignition systems manufacturer with expertise in the entire vehicle spark system.

Product Features:
  • CARQUEST Ignition Modules creates and refines the timing of the engine using various sensors and readings throughout the spark system in order to create an efficiently running engine.
  • CARQUEST Ignition Modules use current and voltage limiting circuitry in order to prevent the ignition coil from over voltage/current. Over voltages can allow for coils to create excessive heat which can damage to the ignition module resulting in check eng
  • CARQUEST Ignition Modules are 100% individually tested for all product functionalities including over voltage, timing and dwell.
See More

Felpro – Ignition Distributor Shaft Seal (Part No.13069)

Ignition Distributor Shaft Seal

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1039)

Distributor Vacuum Advance

from

$36.99
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:
  • Lifecycle tested to meet or exceed OE specifications
  • Direct OE replacement
  • High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
  • Global coverage for import and/or domestic applications.
See More

Carquest Premium – Distributor Rotor (Part No.DAA1002)

Distributor Rotor

from

$4.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Distributor Rotor (Part No.23A1015)

Distributor Rotor

from

$3.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – Ignition Conversion Kit (Part No.CBA1233)

Ignition Conversion Kit

from

$192.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Conversion Kit (Part No.CBA1711)

Ignition Conversion Kit

from

$392.99
Ignition Conversion Kit

Carquest Premium – Ignition Conversion Kit (Part No.CBA1062)

Ignition Conversion Kit

from

$204.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Contact Set (Points) (Part No.A101V)

Contact Set (Points)

from

$16.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
  • Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
  • Thermoplastic housing withstands heat stress for enhanced durability
  • Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
  • External core made from oriented silicon steel ensures durability and longevity
See More

Carquest Premium – Ignition Contact Set (Part No.APA1048)

Ignition Contact Set

from

$15.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Condenser (Part No.GAA1037)

Ignition Condenser

from

$11.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Mallory Prosidewinder 135F Univ/Wire Set

from

$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

Mallory Prosidewinder 90F Univ. Wire Set

from

$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

Helping You Find the Right Ignition and Tune-Up Products for Your Ford P-350

You love your P-350. So we’ve made it easier than ever to help you find Ford P-350 Ignition and Tune-Up Products in our online catalog. Our inventory holds 107 aftermarket and OEM Ignition and Tune-Up Products for your Ford P-350, ranging from $1.29 to $702.99.

We offer parts from 17 brands trusted to make quality Ignition and Tune-Up Products for your Ford P-350. Before you buy, take some time to read through customer reviews. We currently have 3,353 reviews of Ford P-350 Ignition and Tune-Up Products from previous customers. Some of the top rated parts include SPARK PLUG with 4.0 stars and Distributor Rotor with 4.9 stars.

Find your P-350 Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford P-350 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Ignition and Tune-Up Products Brands for Your Ford P-350

Our inventory holds Ignition and Tune-Up Products for your Ford P-350 from 17 trusted brands. You’ll find OEM and aftermarket parts from brands like Autolite, Motorcraft, and NGK, all of which can keep that Ford happy.

Top-Rated Autolite Ignition and Tune-Up Products

Leading Autolite Ignition and Tune-Up Products

We carry Autolite brand parts for your Ford P-350 across several catalog categories, including Spark Plugs. Some of our most reviewed Autolite parts include:

FAQs for Ford P-350 Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the Ford P-350?

Out of 107 Ignition and Tune-Up Products for the Ford P-350, the most popular in our inventory are:
Spark Plug (BSF42C)
from $4.79
(1)
Spark Plug (BSF42C)
Spark Plugs

What are the top-rated Ford P-350 Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your Ford P-350 based on customer reviews/ratings are:
SPARK PLUG
from $2.79
(10)
SPARK PLUG
“Great, good to find original parts…”
Distributor Rotor
from $9.99
(9)
Distributor Rotor
“Installed on a 65 Mustang. Works great. I like that the rotor/wire contact point is rounded.”
Distributor Cap
from $16.05
(9)
Distributor Cap
“Made in the USA”