Ford Hood Pins

The Flowmaster Outlaw Cat-back exhaust system for the 2024-2026 Ford Mustang GT 5.0-liter is perfect for the person looking for a very aggressive exhaust tone inside and outside the vehicle, with all of the performance benefits that you would expect from Flowmaster. This easy to bolt-on emissions-legal system features dual 3.0-inch stainless steel mandrel-bent tubing and our exclusive Scavenger Series X-pipe for a deep unique tone and maximum power. Other features include a pair of our race-proven Outlaw Series mufflers finished off with quad 4.00-inch black ceramic coated tips for a modern look. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, this system includes all necessary parts, hardware and installation instructions. This system does not fit models with the Active Performance Exhaust option. Fits both coupes and convertibles. Backed by Flowmaster’s Limited Warranty.

“This Flowmaster American Thunder Axle-back exhaust system is for 2018-2023 Ford Mustang GT coupes and convertibles with the 5.0L engine and Factory Active Performance Exhaust Option. System features include a pair of specially designed Outlaw series mufflers giving you high flow with a moderately aggressive exterior and interior tone when the valves are closed, and an aggressive “”wide open”” exterior sound level when you open up the valves. Other features include large 3.00-inch mandrel-bent 409S stainless steel tubing for high flow, durability, and longevity. Add to that, a pair of our high-quality valves to accommodate the factory exhaust actuators for when you really want to open up the sound. The system is finished off with quad 4.00-inch polished 304 stainless steel tips for an aggressive look that demands attention, the same as the exhaust note. Includes all necessary parts, hardware and detailed instructions for an easy installation you can do at home. Covered by our Limited Warranty. Note: Fits both coupes and convertibles.”

The Flowmaster American Thunder Cat-back exhaust system is designed for 2015-2017 Ford Mustang GT 5.0L coupes and is perfect for the person looking for an aggressive sound level outside of the car, while maintaining a moderate sound level inside the car. This bolt-on emissions-legal system features our exclusive dual 3.00-inch mandrel-bent Scavenger Series X-pipe assembly for maximum power and a deep unique tone. The Scavenger X-pipe exits into a pair of specially designed 60 Series performance mufflers with 3.00-inch mandrel-bent tailpipes and are finished off with large 4.00-inch polished stainless steel tips. Designed for an easy fit, this system uses the factory hanger locations and includes all necessary parts and hardware for an installation you can do at home. Note: Does not fit Convertibles.

Flowmaster introduces our Outlaw cat-back exhaust system for the 2021-2026 Ford F-150 with the 2.7, 3.5, or 5.0-liter engine and factory dual exit exhaust. The exhaust kit fits PowerBoost and non-hybrid models. This system uses the Super 10 series muffler for an aggressive exhaust tone and increased performance. Maximum dyno gains of 18 hp and 15 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. Dual 4.50-inch black ceramic coated stainless steel tips are used to add a custom look to the truck. All the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

The Force II Cat-back exhaust system for 2014-2016 Ford F-250/F-350 Super Duty trucks with the 6.2L gas engine is perfect for the person looking for mild to moderate sound levels with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system features a 50 Series HD performance muffler and dual mandrel-bent 3.00-inch stainless steel tailpipes for maximum performance and a deep powerful sound. The system comes with your choice of tailpipe exits and can be configured for either straight out the back under the rear bumper for a muscular look, or out the sides behind the rear wheels which is ideal for towing. The tailpipes are finished off with large 4.00-inch polished stainless steel tips and is covered by our Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for easy installation you can do at home. Note: Mounts after the factory resonator.

Flowmaster’s Outlaw Cat-back exhaust system for the 2015-2020 Ford F-150 is perfect for the person looking for an aggressive exterior sound level while maintaining a moderate interior sound with all of the performance benefits that you would expect from Flowmaster. This bolt-on 409S stainless steel system fits all F-150’s with the 2.7L/3.3L/3.5L Ecoboost, 3.5L TiVCT and 5.0L engines. Features include a 3.00-inch mandrel-bent inlet tube flowing into an aggressive Super 10 series performance muffler with dual 2.50-inch mandrel-bent tailpipes. The finishing touch is the large 4.00-inch black ceramic coated stainless steel tips. The system comes with your choice of final tailpipe exits, either out the rear under the bumper for a muscular, or out the sides behind the rear tires if you tow an RV, boat or trailer. This system fits all 2/4 WD and Wheelbases, except Standard Cab/Short Bed models. Designed for an easy fit, this system includes all necessary parts, hardware for an easy installation you can do at home.

Flowmaster’s Signature Series Axle-back exhaust system for the 2021-2025 Ford Bronco with the 2.3 or 2.7-Liter engine. This system uses a TIG welded 304 stainless steel Signature Series style muffler for a deep exhaust tone with an aggressive to moderate sound level and increased performance. Maximum dyno gains of 17 hp and 18 lb-ft. were measured at the rear wheels. The system uses 3.00-inch mandrel bent brushed 304 stainless steel tubing to maximize exhaust flow and durability. This premium exhaust system is TIG welded for a stronger, more precise weld that looks as good as this system sounds. Dual 4.00-inch PVD coated black chrome tips are used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

The Flowmaster American Thunder Axle-back exhaust system for the 2018-2023 Ford Mustang GT with the 5.0L engine is perfect for the person looking for an aggressive exterior sound level with all of the performance benefits that you would expect from Flowmaster. This bolt-on 409S stainless steel system features 3.00-inch mandrel-bent tubing and two Super 44 series mufflers for maximum power and exterior sound quality, but with a moderate and pleasant interior tone at cruising speeds. The system is finished off with quad 4.00-inch polished 304 stainless steel tips. This system includes all necessary parts, hardware and instructions for an easy installation. NOTE: This kit will not fit vehicles with the Active Performance Exhaust option. Note: Fits Coupes & Convertibles.

This Flowmaster American Thunder cat-back exhaust system for the 2019-2023 Ford Ranger with the 2.3-liter engine is manufactured using durable 409 stainless steel throughout and features 2.50 and 3.00-inch mandrel bent pipes for better exhaust gas flow. An Outlaw series muffler is used for an aggressive to moderate sound level and maximum performance. Gain up to 9 hp and 12 lb-ft of torque at the rear wheels over stock. This dual exit system has dual 3.50-inch polished stainless steel tips with the Flowmaster logo embossed in them, for added style and a custom look, and can be configured to exit dual out the rear or dual out the side. This system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster’s Limited Warranty.

Our new Outlaw Cat-back exhaust system for 2009-2014 Ford F-150 trucks is perfect for the person looking for maximum sound levels both inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side tailpipe exits) is emissions legal and fits trucks with the 4.6L, 5.0L and 5.4L engines. Features include all stainless steel mandrel-bent construction, a Super 10 Series muffler and exiting into dual 3.00-inch mandrel-bent tailpipes for maximum performance and sound. The exhaust features large 4.00-inch black ceramic coated double wall stainless steel tips and is covered by our Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for easy installation you can do at home. Note: Fits 2/4 wheel drive and all wheelbases.

Flowmaster’s Signature Series Cat-back exhaust system for the 2021-2026 Ford F-150 trucks with the 2.7, 3.5, and 5.0-liter engines. This system uses a TIG welded 304 stainless steel Signature Series muffler for an aggressive to moderate sound level and increased performance. 3.00-inch mandrel bent brushed 304 stainless steel tubing allows for maximum exhaust flow and durability, while maintaining a high-end appearance. This premium exhaust system is TIG welded for a stronger, more precise weld that looks as good as this system sounds. This system use a larger 4.50-inch PVD coated black chrome tip for a custom look. Max dyno gains of 13 hp and 16 lb-ft at the rear wheels. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

Flowmaster’s American Thunder Cat-back exhaust system for the 2015-2020 Ford F-150 is perfect for the person looking for an aggressive exterior sound level while maintaining a moderate interior sound with all of the performance benefits that you would expect from Flowmaster. This bolt-on 409S stainless steel system fits all F-150’s with the 2.7L/3.3L/3.5L Ecoboost, 3.5L TiVCT and 5.0L engines. Features include a 3.00-inch mandrel-bent inlet tube flowing into a Super 40 series performance muffler with dual 2.50-inch mandrel-bent tailpipes. The finishing touch is the polished 3.50-inch stainless steel tips. The system comes with your choice of final tailpipe exits, either out the rear under the bumper for a muscular, or out the sides behind the rear tires if you tow an RV, boat or trailer. Designed for an easy fit, this system includes all necessary parts, hardware for an easy installation you can do at home. Notes: This system fits all 2/4 WD and all Wheelbases, except Standard Cab/Short Bed.

This Flowmaster Outlaw cat-back exhaust system is for the 2021-2026 Ford F-150 trucks with the 2.7L, 3.5L and 5.0L engines and offers maximum sound levels both inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system features all mandrel-bent 409 stainless steel 3.00-inch tubing flowing into a Super 10 Series muffler and exiting into large 3.00-inch dual tailpipes for maximum sound and performance. The system comes with two sets of tailpipe exits for you to choose from, either straight out the back under the bumper, or exiting behind the rear wheels, which is ideal for towing applications. The tailpipes are finished off with a pair of large 4.00-inch black ceramic-coated stainless steel tips and the exhaust system is covered by our Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Note: Fits 2/4 wheel drive.

Flowmaster introduces our American Thunder axle-back exhaust system for the 2024-2025 Ford Mustang GT with the 5.0-liter engine or the EcoBoost 2.3L engine and the standard factory non-valved exhaust system. This system uses the Super 44 series mufflers for an aggressive exhaust tone and increased performance. Maximum dyno gains of up to 8 hp and 6 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. Dual 4.00-inch polished stainless steel tips are used to add a custom look to this iconic vehicle. All the necessary hardware is included and factory mounting locations are used for an easy installation. Fits both coupes and convertibles. Backed by Flowmaster’s Limited Warranty.

“Our new Flow FX cat-back exhaust system is manufactured using durable 409S stainless steel throughout and features a 3.00-inch inlet pipe leading to a single inlet/dual outlet Flow FX “”straight-through”” muffler for great sound and maximum performance. The dual 2.50-inch mandrel bent stainless tailpipes exit out the sides at an angle behind the rear wheels directing exhaust away from your boat or travel trailer when towing. The system is finished off with a pair of large 4.50-inch diameter black ceramic coated 304S stainless steel tips, giving your truck a custom look that goes hand in hand with that deep performance Flow FX sound. The system uses all the existing factory hanger locations and includes an additional hanger to install the new left side tailpipe. Includes installation instructions and all necessary hardware for an easy installation that you can do at home. Note: Fits 2/4 Wheel Drive.”

Flowmaster introduces our Force II stainless steel cat-back exhaust system for the 2021-2026 Ford F-150 trucks with the 2.7, 3.5, and 5.0-Liter engines. This system uses the Super 50 series muffler for a moderate to mild sound level and increased performance. This 3 chamber muffler has a resonance chamber to reduce interior sound, ideal for towing or long haul situations. Mandrel bent 3.00-inch to dual out 2.50-inch 409 stainless steel tubing allows for maximum exhaust flow and durability. This system uses larger 4.00-inch polished stainless steel tips for a custom look. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

Flowmaster introduces our Outlaw Axle-back exhaust system for the 2024-2026 Ford Mustang GT with the 5.0-liter engine or EcoBoost 2.3-liter engine and the non-valved factory exhaust. This system uses the Outlaw style mufflers for an aggressive exhaust tone and increased performance. Maximum dyno gains of up to 8 hp and 7 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. Dual 4.00-inch polished stainless steel tips are used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Fits both coupes and convertibles. Backed by Flowmaster’s Limited Warranty.

This Flowmaster Outlaw Cat-back exhaust system for the 2004-2008 Ford F-150 truck is perfect for the person looking for maximum sound levels both inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal exhaust system for trucks with the 4.6L or 5.4L engine features all mandrel-bent stainless steel tubing flowing into a Super 10 Series muffler for a deep aggressive exterior and interior sound. The mandrel-bent dual 3.00-inch stainless steel tailpipes use the factory hanger locations for an easy installation and are finished off large 4.00-inch black ceramic coated double wall stainless steel tips. The exhaust system is covered by Flowmaster’s Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home. Note: Fits 2/4 wheel drive models all Wheelbases.

Flowmaster’s American Thunder cat-back exhaust system for the 1998-2003 Ford F-150 pickup truck is perfect for the person looking for an aggressive exterior sound level with all of the performance benefits that you would expect from Flowmaster. This system allows you the choice of either dual out the rear exit tailpipes, or dual out the sides behind the rear wheels, which is perfect for towing. The bolt-on 409S stainless steel system fits both the 4.6L and the 5.4L V8 engines and features a Super 40 Series performance muffler and dual 2.50-inch mandrel-bent tailpipes finished off with a pair of large 3.50-inch polished stainless steel tips. This system is designed to fit all 2/4 wheel drives, all wheelbases and is covered by our Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation.

This Flow FX cat-back exhaust system is for the 2021-2026 Ford F-150 trucks with the standard 2.7, 3.5, and 5.0-liter and PowerBoost 3.5L engines that are equipped with the optional dual exhaust out the rear bumper. This exhaust offers a deep throaty exhaust note with aggressive to moderate sound levels both inside and outside of the truck, with all the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system features all mandrel-bent 409 stainless steel 3.00-inch tubing that flows into a FFX straight through muffler and exiting into large 3.00-inch dual tailpipes for maximum sound and performance. The system exits the OEM rear bumper cut outs and uses all the factory hanger locations. The tailpipes are finished off with a pair of large 4.50-inch black ceramic-coated stainless-steel tips for a more aggressive look than the factory tip. This exhaust system is covered by our Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation.

The new Flowmaster Outlaw Cat-back exhaust system for the 2015-2020 Ford F-150 trucks is perfect for the person looking for an aggressive sound level outside and inside the truck with all of the performance benefits that you would expect from Flowmaster. This bolt-on emissions-legal system is custom built for trucks with the 2.7L, 3.3L or 3.5L Ecoboost engines and features a race proven Outlaw Series muffler and a large mandrel-bent 4.00-inch mandrel-bent tailpipe for maximum performance and tone. The system is constructed from 409S stainless steel and utilizes a large 5.00-inch black ceramic coated stainless steel tip. The exhaust system is covered by Flowmaster’s Limited Warranty, is designed for an easy fit and includes all necessary parts and hardware for an easy installation you can do at home. Note: Fits all 2/4 wd.

This Flowmaster American Thunder cat-back exhaust system is for the 2021-2026 Ford F-150 with the 3.5-liter PowerBoost. This system is manufactured using durable 409 stainless steel tubing and is mandrel bent for better exhaust gas flow. A specially tuned resonator is used for a deep, moderate to mild sound level and maximum performance. This system uses a 5.00-inch black ceramic coated stainless steel tip for added style. This system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster’s Limited Warranty.

The Outlaw Axle-back exhaust system is specifically designed for all 2015-2023 Ford Mustang coupes and convertibles with the 2.3L Ecoboost or 3.7L engines. System features include large 3.00-inch mandrel-bent tubing flowing into a pair of race-proven Outlaw series mufflers for an aggressive exterior sound level, with a noticeable interior tone. Other features include a pair of large 4.00-inch black ceramic coated stainless steel tips for an aggressive look and the system uses the factory hangers for a quick and easy installation. The system includes all necessary parts, hardware, and instructions and is covered by our Flowmaster Limited Warranty. Note: Fits both Coupes and Convertibles.

This Flowmaster American Thunder Cat-back exhaust system for the 2014-2019 Ford Fiesta ST with the 1.6L engine is perfect for the person looking for an aggressive exterior sound level with all of the performance benefits that you would expect from Flowmaster. System features include all 2.50-inch mandrel-bent stainless steel tubing, a specially designed matched set hi-flow performance muffler and resonator ensuring maximum power and a quality exterior sound with a moderate and pleasant interior tone at cruising speeds. The system uses all the factory hangers locations for an easy installation and is finished off with a highly polished dual 3.00-inch exhaust tip for both good looks and amazing sound. System includes all necessary parts, hardware and instructions for an installation you can do at home. Covered by our Limited Warranty.

“Our new Flowmaster Flow FX cat-back exhaust system is manufactured using durable 409S stainless steel throughout and features a 3.00-inch inlet pipe leading to a single inlet/dual outlet Flow FX “”straight-through”” muffler for great sound and maximum performance. The dual 2.50-inch mandrel-bent stainless tailpipes exit out the sides at an angle behind the rear wheels directing exhaust away from your boat or travel trailer when towing. The system is finished off with a pair of large 4.50-inch diameter black ceramic coated 304S stainless steel tips, giving your truck a custom look that goes hand in hand with that deep performance Flow FX sound. The system uses all the existing factory hanger locations and includes an additional hanger to install the new left side tailpipe. Includes detailed installation instructions and all necessary hardware for an easy installation that you can do at home. Note: Fits 2/4 Wheel Drive and all Wheelbases.”