Ford GT40 Performance and Racing Products
Top Ford GT40 Performance and Racing Products Categories
We carry over 101 Performance and Racing Products in inventory for the Ford GT40. If you’re looking for aftermarket Performance and Racing Products for your Ford GT40, check out all these categories:
Essential Ford GT40 Performance and Racing Products
Edelbrock – Performer RPM Series fuel pump is for 289-351W Ford (Part No.1725)
from
$186.99
Product Features:
See More
- Mechanical Operation
- Fuel Sending Unit Not Included
- For Small-Block 289-351 Ford Engines
- In Tank Mounting Type
- 110 GPH
Lakewood – Drag Shock-70/30:Ford/GM/Mopar (Part No.40121)
from
$119.99
The best all-round choice for vehicles with leaf or coil springs. Properly loads rear wheels to prevent over-reaction and wheel hop.
Product Features:
See More
Product Features:
- Excellent Weight Transfer
- Lets Front End Down Quickly
- Maximum Traction
- Makes Vehicle Safer
- Easier Control At End Of Track
- Better Overall Stability
Edelbrock – Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1403)
from
$518.99
The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Competition Cams – Magnum Roller 1.6 Ratio Rocker Arm Set (Part No.1431-16)
from
$350.99
These Magnum Roller Rocker Arms for Ford V8 289-351W (Rail Type) 1968-89 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.6 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 lbs. open spring pressure. Don’t accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.
Product Features:
See More
Product Features:
- Ultimate street rocker designed for serious performance enthusiasts
- Constructed from 8620 chromemoly steel, a superior material that will not flex and assures maximum lift
- Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift
- 15 to 30 horsepower increase over stock rocker arms
- Use in any applications with less than 350 lbs. open spring pressure
Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.72208)
from
$174.99
Available in different sizes for many different vehicle models/years. Clean positive seal. Embossed silicone bead surrounding the port. Matched to manifolds and cylinder heads. In the early days of the automotive performance industry, you either ran what
Product Features:
See More
Product Features:
- Clean positive seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
- Fits 1963-96 289/302/351W Engines
- 10-Pack Of Gaskets
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1614)
from
$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1442)
from
$33.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
B & M – Automatic Shifter – Megashifter – Universal (Part No.80690)
from
$527.99
The Classic BAndM Megashifter features a Ratcheting action, ensuring positive shifts. Chrome Knob, Neutral safety switch And NHRA/IHRA Approved reverse lockout. Fits Most 3 And 4 speeds.
Product Features:
See More
Product Features:
- Universal Floor Mount
- Base Can Be Trimmed-Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
Edelbrock – Performer RPM Ford Small Block 302 Intake Manifold (Part No.7121)
from
$359.99Product Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
Competition Cams – VALVE SPRINGS, 1.437" SINGLE 1 ST (Part No.942-16)
from
$257.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.
Product Features:
See More
Product Features:
- Seat pressure: 115 lbs. @ 1.700″, Open Pressure: 284 lbs. @ 1.200″
- O.D.: 1.437″, I.D.: 1.039″
- Single valve springs with damper
- Approximately .510″ max lift at recommended installed height
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1020)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)
from
$338.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Accel – Supercoil (Part No.140001)
from
$114.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Mr. Gasket – Valve Cover (Part No.9412)
from
$99.99
These Mr. Gasket chrome plated stamped steel valve covers have a flat smooth top, and internal baffles. Fits Ford 332,360,390,406,427,428. Sold as a pair.
Product Features:
See More
Product Features:
- Fits Ford big block (FE series)
- Chrome plated steel construction
- Sold as a pair
- Long Lasting Durability
- Cadmium Plated To Resist Corrosion
- Easy Installation
Mallory – Mallory Unilite Dist.: 332-428 Fe Ford (Part No.3755301)
from
$599.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Mr. Gasket – Alternator Bracket (Part No.5185)
from
$44.99
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty. Similar in design to original equipment units.
Product Features:
See More
Product Features:
- Fits Small Block Ford 1965-’69 – OEM Style
- Polished To High Luster
- Chrome Plated For Lasting Beauty
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$106.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
Competition Cams – Set of 16 Umbrella Valve Seals for Stock Guide Size, 11/32" Valve Stem (Part No.502-16)
from
$230.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with stock guides and 11/32″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mr. Gasket – Waterpmpply (Part No.8829)
from
$74.99
Replace your stock black engine pulleys with chrome plated steel pulleys from Mr. Gasket.
Product Features:
See More
Product Features:
- Triple Groove
- Chrome Plated
- Diameter: 5.90″
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Ford GT40 Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Ford GT40
You love your GT40. So we’ve made it easier than ever to help you find Ford GT40 Performance and Racing Products in our online catalog. Our inventory holds 101 aftermarket and OEM Performance and Racing Products for your Ford GT40, ranging from $7.99 to $1,087.99.
We offer parts from 11 brands trusted to make quality Performance and Racing Products for your Ford GT40. Before you buy, take some time to read through customer reviews. We currently have 816 reviews of Ford GT40 Performance and Racing Products from previous customers. Some of the top rated parts include Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet with 5.0 stars and Unilite Ignition Module with 5.0 stars.
Find your GT40 Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford GT40 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Ford GT40
Our inventory holds Performance and Racing Products for your Ford GT40 from 11 trusted brands. You’ll find OEM and aftermarket parts from brands like FEL-PRO Performance, Holley, and Edelbrock, all of which can keep that Ford happy.
We have B & M parts available for your Ford GT40 in categories like Performance Shifters. Some of the top-rated B & M parts in these categories are:
Top-Rated Holley Performance and Racing Products
Leading Holley Performance and Racing Products
We carry Holley brand parts for your Ford GT40 across several catalog categories, including Performance Fuel Systems. Some of our most reviewed Holley parts include:
from
$499.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
Performance Carburetors
from
$682.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
Performance Carburetors
FAQs for Ford GT40 Performance and Racing Products
What are the most purchased Performance and Racing Products for the Ford GT40?
Out of 101 Performance and Racing Products for the Ford GT40, the most popular in our inventory are:
from
$35.99
(4)
Lower Intake Manifold Gasket Set: 11 Piece Set
Performance Engine Intake Manifold Gaskets
from
$52.99
(2)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets
from
$30.99
(1)
Intake Manifold Gasket for 1963-1996 Small-Block Fords
Performance Engine Intake Manifold Gaskets
What are the top-rated Ford GT40 Performance and Racing Products?
Top-rated Performance and Racing Products for your Ford GT40 based on customer reviews/ratings are:
from
$518.99
(3)
Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“only required idle mixture and idle speed adjustments.”
from
$92.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
from
$186.99
(3)
Performer RPM Series fuel pump is for 289-351W Ford
“I installed this product on my ’57 Ford F100 that has a ’74 302 v8 under the hood. I geat great fuel pressure now, and this pump is a direct match fo”
