Ford Fusion Suspension Parts

Essential Ford Fusion Suspension Parts

KYB – Jounce Bumper and Bellows (Part No.SB132)

Jounce Bumper and Bellows

from

$22.79
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

MOOG – Control Arm (Part No.RK643610)

Control Arm

from

$95.99
Control Arm

Motorcraft – Shock Mount (Part No.L4010662177MTR)

Shock Mount

from

$103.94
The Motorcraft shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • OE style mounts and fasteners
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$251.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Royal Purple – POWER STEERING FLUID (Part No.01326)

POWER STEERING FLUID

from

$6.29
POWER STEERING FLUID

Carquest Premium – Knuckle Insert (Part No.230-713095)

Knuckle Insert

from

$6.49
CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hardware included for easier installation (where applicable)
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.L3033570156MNR)

Strut-Mate Strut Mounting Kit

from

$53.51
Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:
  • Strut Mount
  • Bearing
  • Upper Spring Isolator
  • Lower Spring Isolator
  • Upper Spring Seat
See More

Firestone Ride-Rite – Air Spring, 500-1000Lb Leveling, Adjustable From 5-35Psi, Polyurethane (Part No.4169)

Air Spring, 500-1000Lb Leveling, Adjustable From 5-35Psi, Polyurethane

from

$139.99
Discover the difference Coil Rite air helper springs can make in improving the ride, handling and braking of your vehicle. Coil Rite air helper springs provide extra support for coil springs in cars, minivans, vans, light trucks, RVs and SUVs. The adjustable Coil Rite air helper springs will level your vehicle, provide a smoother ride, and assist with more effective braking and handling, even under heavy loading and adverse road conditions. Coil Rite air helper springs are designed to fit inside existing coil spring suspensions, creating a variable rate spring. These air helper springs are made of durable, elastic polyurethane, providing years of comfort and stability to your vehicle. Firestone Coil Rite air helper springs enable adjustment for varying loads and road conditions by controlling the air pressure in the air helper springs. Spring performance can be altered as easily as inflating a tire. The air springs will support 500 To 1000 Pounds per set.

Product Features:
  • Made Of Durable Polyurethane To Withstand The Rigors Of Coil-Sprung Suspensions
  • Increase Vehicle Stability Absorbs Road Shock Providing A Smooth Ride For Passengers And Load
  • Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
  • Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
  • Discover The Difference Coil-Rite Air Helper Springs Can Make In Improving The Ride, Handling And Braking Of Your Vehicle
  • No Drill Installation
  • Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation
See More

Firestone Ride-Rite – Controls Two Air Springs Individually, With Compressor/Gauge, Switch Operated (Part No.2178)

Controls Two Air Springs Individually, With Compressor/Gauge, Switch Operated

from

$776.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:
  • Designed To Provide Inflation Control Of Your Air Helper Springs
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Dorman – Suspension Integral Link (Part No.528-208)

Suspension Integral Link

from

$107.99
This suspension integral link is precision-engineered and rigorously tested to match the fit and function of the original equipment part on specific vehicles.

Product Features:
  • Direct replacement – this integral link fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using quality materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Carquest Premium – Steering Angle Sensor (Part No.SBA3879)

Steering Angle Sensor

from

$95.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Multi Purpose Relay (Part No.83A1002)

Multi Purpose Relay

from

$15.79
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.905918)

Strut-Mate Strut Mounting Kit

from

$50.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

MOOG – Control Arm (Part No.RK641279)

Control Arm

from

$61.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Construction and design validated by MOOG engineers
  • Broad coverage for foreign and domestic applications
See More

KYB – STRUT MOUNTING KIT (Part No.L3033398566KYB)

STRUT MOUNTING KIT

from

$85.43
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The highest quality replacement strut mount available
  • Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
  • Superior rubber reduces noise, vibration and harshness
  • Mount bearings provide smoother steering and help retain front end alignment
  • Matched grade studs and nuts
See More

MOOG – Coil Spring Set (Part No.81661)

Coil Spring Set

from

$171.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

MOOG – Control Arm Bushing (Part No.K200251)

Control Arm Bushing

from

$27.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5667)

OESpectrum Passenger Car Shock Absorber

from

$95.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • Premium – Limited Lifetime Warranty
  • For Commercial Usage Refer to Product Warranty
See More

Driveworks – Strut Bellow (Part No.DW-K90460)

Strut Bellow

from

$11.99
Driveworks Shock Mount, Suspension Strut Bellows

Product Features:
  • Designed to meet or exceeds OE performance specifications
  • Durable neoprene rubber
See More

Dorman – Suspension Lateral Arm (Part No.520-040)

Suspension Lateral Arm

from

$55.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Suncore – Shock Kit (Part No.2-12S252080-001)

Shock Kit

from

$39.99
Shock Kit

MOOG – Coil Spring Seat (Part No.K160450)

Coil Spring Seat

from

$15.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Returns like-new steering
  • Long-lasting performance
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.182261)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$119.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
  • EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
  • CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
  • COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
See More

Monroe – OESpectrum Strut Assembly (Part No.L3000570095MNR)

OESpectrum Strut Assembly

from

$98.49
TWIN TECHNOLOGY TUNED FOR EXCEPTIONAL CONTROL The Monroe OESpectrum shock absorbers feature our latest, global, original equipment valving technologies for domestic and foreign nameplate applications. Monroe OESpectrum units provide an unprecedented level of handling precision and control while filtering out ride harshness. This unique blend of control and comfort is made possible through Tenneco’s Twin Technology Active Control System, an exclusive internal damping control technology. Tenneco’s Twin Technology consists of the latest Impact Control Valve (ICV), delivers exceptional control by regulating the flow of fluid which helps control vehicle roll and isolate road impact, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration, and harshness experienced with rough, bumpy road conditions.

Product Features:
  • All Weather Fluid – Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Rod Displaced Valving – Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
  • Fluon Banded Piston – The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • Twin Tube Technology – Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Hardened and Chrome Plated Piston Rod – Long service life.
  • Nitrogen Gas Charged – For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Unique Rod Guide Single Lip Seal – Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
  • Special Dust Boot/Jounce Bumper – Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. (Dust Boot and Jounce bumper sold separately)
See More

Motorcraft – Strut Assembly (Part No.L30001155206MTR)

Strut Assembly

from

$198.06
Strut Assembly

Helping You Find the Right Suspension Parts for Your Ford Fusion

You love your Fusion. So we’ve made it easier than ever to help you find Ford Fusion Suspension Parts in our online catalog. Our inventory holds 143 aftermarket and OEM Suspension Parts for your Ford Fusion, ranging from $6.29 to $1,217.99.

We offer parts from 20 brands trusted to make quality Suspension Parts for your Ford Fusion. Before you buy, take some time to read through customer reviews. We currently have 10,302 reviews of Ford Fusion Suspension Parts from previous customers. Some of the top rated parts include Shock-Mate Shock Absorber Boot Kit with 4.6 stars and Strut Bellow with 4.1 stars.

Find your Fusion Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Fusion part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Suspension Parts Brands for Your Ford Fusion

Our inventory holds Suspension Parts for your Ford Fusion from 20 trusted brands. You’ll find OEM and aftermarket parts from brands like Monroe, Carquest, and Carquest Premium, all of which can keep that Ford happy.
We have MOOG parts available for your Ford Fusion in categories like Control Arms and Shocks and Struts. Some of the top-rated MOOG parts in these categories are:
Control Arm
from $61.99
(1)
Control Arm
Lateral Links
Suspension Strut Mount
from $90.99
(1)
Suspension Strut Mount
Strut Mounts
Control Arm
from $42.49
(2)
Control Arm
Lower Control Arms

Top-Rated Monroe Suspension Parts

Leading Monroe Suspension Parts

We carry Monroe brand parts for your Ford Fusion across several catalog categories, including Shocks and Struts and Coil and Leaf Springs. Some of our most reviewed Monroe parts include:
Shock-Mate Shock Absorber Boot Kit
from $13.99
(35)
Shock-Mate Shock Absorber Boot Kit
Shock Boots, Levelers, and Accessories
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
from $188.99
(14)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Suspension Strut and Coil Spring Assemblies
OESpectrum Passenger Car Shock Absorber
from $95.99
(13)
OESpectrum Passenger Car Shock Absorber
Rear Shock and Struts

FAQs for Ford Fusion Suspension Parts

What are the most purchased Suspension Parts for the Ford Fusion?

Out of 143 Suspension Parts for the Ford Fusion, the most popular in our inventory are:
A/C and Heater Relay
from $23.29
(24)
A/C and Heater Relay
Active Suspension Relays
Multi Purpose Relay
from $15.79
This product is not rated
Multi Purpose Relay
Active Suspension Relays
OESpectrum Passenger Car Shock Absorber
from $92.99
(11)
OESpectrum Passenger Car Shock Absorber
Rear Shock and Struts

What are the top-rated Ford Fusion Suspension Parts?

Top-rated Suspension Parts for your Ford Fusion based on customer reviews/ratings are:
Shock-Mate Shock Absorber Boot Kit
from $13.29
(13)
Shock-Mate Shock Absorber Boot Kit
“worked very well”
Strut Bellow
from $11.99
(13)
Strut Bellow
“Easy to use. Great quality.”
Strut Bellows
from $34.99
(12)
Strut Bellows
“Worked as designed”