Ford Focus Tools
Top Ford Focus Tools Categories
We carry over 16 Tools in inventory for the Ford Focus. If you’re looking for aftermarket Tools for your Ford Focus, check out all these categories:
Essential Ford Focus Tools
Carquest Premium – Multi-Use Connector (Part No.PTC2753)
from
$75.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Schrader – Nickel Plated Brass Valve Core – 100 Pack (Part No.20055-100)
from
$23.99
Schrader is a pioneer in TPMS, a vehicle safety feature that is now standard on all cars and light trucks sold in the U.S. Schrader¿s direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms.
Product Features:
See More
Product Features:
- Valve core is nickel plated to aid in corrosion resistance
- Valve core torque spec = 3.5 in-lbs
- Valve core provides an internal seal for the valve stem, while also allowing tire fill
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Black Plastic (Long) Valve Cap – 100Pk (Part No.20595-100)
from
$29.99
Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Product Features:
See More
Product Features:
- Cap designed to fit standard valve stem
- Cap contains rubber o-ring to provide sealing and prevent moisture and contamination from entering the valve
- Cap designed to OE standards
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Caps are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Carquest Wearever – Brake Hardware Kit With Quiet Clip (Part No.3019407)
from
$2.49
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Carquest Wearever – Brake Bleeder Screw (Part No.301H9411)
from
$0.99
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Carquest Wearever – Bleeder Screw (Part No.H9411-2)
from
$2.99
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Carquest Wearever – Brake Adjusting Spring (Part No.301H9406)
from
$0.99
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Russell – Speed Bleeder, Thread Size – 8 mm X 1.25 (Part No.639520)
from
$27.49
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Carquest Wearever – Bleeder Screw (Part No.H9406-2)
from
$5.99
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- This part matches Original Equipment (OE) quality specifications
Russell – Speed Bleeder, Thread Size – 10 mm X 1.0 (Part No.639560)
from
$27.49
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Russell – Speed Bleeder, Thread Size – 8 mm X 1.25 (Part No.639620)
from
$27.49
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Bully Dog – BDX Tuner (Part No.40470)
from
$456.99
Bully Dog BDX tuners are bred to sharpen and maximize your rig’s potential to tackle tough terrain, pull heavy payload, and gain the most fuel economy on the highway.
Product Features:
See More
Product Features:
- Bully Dog gas and diesel programmers are equipped with on-screen gauges, the capability of holding 10 custom tunes, and data logging/monitoring of critical engine parameters.
- They also offer cloud-based tune delivery with built-in Wi-Fi for the latest tunes tailored to your rig.
- All of this is packed into compact, sleek, handheld designs with full-color, easy-to-use LCD displays.
- Product might not be available in all states due to local laws.
Diablosport – Trinity 2 (Part No.9145)
from
$666.99
Trinity 2
Diablosport – Trinity 2 (Part No.9100)
from
$666.99
Trinity 2
SCT Performance – Livewire TS Plus Performance Programmer and Monitor (Part No.5015P)
from
$599.99
The Livewire TS+ unlocks your vehicle’s hidden performance by re-calibrating your vehicle’s computer for maximum horsepower & torque, increased throttle response, firmer shifts, and even increased fuel mileage. The LiveWire TS+ arrives preloaded with Dyno-proven performance tune files and holds up to 10 custom tuning files for tune flexibility. Access it all on the customizable touch screen.
Product Features:
See More
Product Features:
- Using the 4″ touchscreen, track critical performance data using the on-screen virtual gauges.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Product might not be available in all states due to local laws.
Dayco – Ela Stretch Belt Installation Tool: Reusable Mounting Bolt (Part No.93875)
from
$31.99
The Dayco ela belt installation tool is required when specified on certain ela (stretch to fit) belt applications. Note: some ela belts requires only a simple zip tie to install, please verify the Dayco ela belt installation tool is required for your application. Do not attempt to install by prying the belt on the pulleys.
Product Features:
See More
Product Features:
- Ela belt and belt tool sold separately
- Can be used on multiple Dayco ela (stretch to fit) belts
- Includes reusable mounting bolt
- Includes installation instructions
Ford Focus Tools Categories
Helping You Find the Right Tools for Your Ford Focus
You love your Focus. So we’ve made it easier than ever to help you find Ford Focus Tools in our online catalog. Our inventory holds 16 aftermarket and OEM Tools for your Ford Focus, ranging from $0.99 to $666.99.
We offer parts from 8 brands trusted to make quality Tools for your Ford Focus. Before you buy, take some time to read through customer reviews. We currently have 240 reviews of Ford Focus Tools from previous customers. Some of the top rated parts include Speed Bleeder, Thread Size – 10 mm X 1.0 with 2.5 stars and Livewire TS Plus Performance Programmer and Monitor with 5.0 stars.
Find your Focus Tools here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Focus part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Tools Brands for Your Ford Focus
Our inventory holds Tools for your Ford Focus from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest, Dayco, and Bully Dog, all of which can keep that Ford happy.
We have Bully Dog parts available for your Ford Focus in categories like Speciality Tools. Some of the top-rated Bully Dog parts in these categories are:
Top-Rated Dayco Tools
Leading Dayco Tools
We carry Dayco brand parts for your Ford Focus across several catalog categories, including Speciality Tools. Some of our most reviewed Dayco parts include:
FAQs for Ford Focus Tools
What are the most purchased Tools for the Ford Focus?
Out of 16 Tools for the Ford Focus, the most popular in our inventory are:
What are the top-rated Ford Focus Tools?
Top-rated Tools for your Ford Focus based on customer reviews/ratings are:
from
$27.49
(2)
Speed Bleeder, Thread Size – 10 mm X 1.0
“These bleeders allow you to leave the bleeder open while you pump the brake pedal to force fluid through the brake line. The check valve in the bleede”
from
$599.99
(1)
Livewire TS Plus Performance Programmer and Monitor
“I bought it for my f350 2008 6.4 and it worked perfectly”
