Felpro Severe Duty Engine Cylinder Head Gasket, 520 SD

from

$42.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Edelbrock Pushrod Set for Small Block Ford 289-302 V-8, Black Oxide finish, 9632

from

$233.99

“Edelbrock part No: 9632 Pushrods are designed for small-block Ford 289-302 V-8 engine applications. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise formed wedged ends for a high quality fit with the cup seats. A black oxide finish is added for corrosion resistance. Pushrod Specifications: – Outside Diameter: 5/16″” – Length: 6.800″””

from

$1574.99

Edelbrock CYLINDER HEAD, 60665. PERFORMANCE PARTS>PERFORMANCE ENGINE>ENGINE>CYLINDER HEADS from Edelbrock

Sealed Power Engine Rocker Arm Ball Stud, MR-1847

from

$1.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Sealed Power Engine Rocker Arm Nut, MR-1823

from

$0.72

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Melling Select Performance Valve Train Set Up Spring, VTSS100

from

$11.79

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

Sealed Power Engine Valve Lifter, HT-900

from

$13.79

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007

from

$1.79

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

"Competition Cams Super Valve Locks, 11/32"" 1 St, 611-16"

from

$40.99

Inside tang-to-taper relationship held tightly for repeatable valve spring installed heights

Edelbrock Victor Jr Small-Block Ford Cylinder Head Bare, 77219

from

$858.99

Edelbrock Victor Jr Small-Block Ford Cylinder Head Bare, 77219.

Edelbrock Classic Series Valve Cover, 41609

from

$291.99

Edelbrock part No: 41609 Classic Series Valve Covers are designed for Ford 221-351W V8 1962-95 applications and have a Satin finish. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. Made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

"Edelbrock Valve Seat For S/B Chevy Heads With 1.60"" Valves, 9711"

from

$86.99

The Edelbrock No. 9711 Intake Valve Seat set is a replacement for Edelbrock cylinder heads.

ARP Auto Racing For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile, 154-3601

from

$82.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Remflex Flexible Graphite, Set Of 2, 1-1/4 Inch X 1-5/8 Inch Square Port Size, 3028

from

$37.99

Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.

Dorman STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (Sold by each), 675-131

from

$4.29

This engine cylinder head bolt directly replaces the original bolt on specific vehicle years, makes and models.

Victor Reinz Engine Cylinder Head Gasket Set, 02-10359-01

from

$97.99

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 8548 PT-2

from

$62.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

"ARP Auto Racing 1.895""Oal Stud, 1""D Adjuster Thread, 3/8""-24, 7/16""-14 Thread, 0.71""D Screw-In, 134-7124"

from

$13.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

"ARP Auto Racing For Use With Chevy Small Block, 1.895"" Stud L, Black Oxide, Chrome, Set Of 16, 134-7104"

from

$98.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

"Competition Cams Stud Girdle for Ford 351C Boss with Ford Motorsport Head with 7/16"" Stud, 4016"

from

$452.99

“Competition Cams Stud Girdle for Ford 351C Boss with Ford Motorsport Head with 7/16″” Stud, 4016. ”

from

$169.99

The Edelbrock No: 5823 replacement mechanical roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Ford Falcon Valve Cover and Cylinder Heads

Your One-Stop Shop For Trusted Ford Falcon Valve Cover and Cylinder Heads

Essential Ford Falcon Valve Cover and Cylinder Heads

Felpro – Felpro Severe Duty Engine Cylinder Head Gasket, 520 SD (Part No.520 SD)

Edelbrock – Edelbrock Pushrod Set for Small Block Ford 289-302 V-8, Black Oxide finish, 9632 (Part No.9632)

Edelbrock – Edelbrock CYLINDER HEAD, 60665 (Part No.60665)

Sealed Power – Sealed Power Engine Rocker Arm Ball Stud, MR-1847 (Part No.MR-1847)

Sealed Power – Sealed Power Engine Rocker Arm Nut, MR-1823 (Part No.MR-1823)

Melling Select Performance – Melling Select Performance Valve Train Set Up Spring, VTSS100 (Part No.VTSS100)

Sealed Power – Sealed Power Engine Valve Lifter, HT-900 (Part No.HT-900)

Dorman – Dorman Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each), 555-007 (Part No.555-007)

Competition Cams – "Competition Cams Super Valve Locks, 11/32"" 1 St, 611-16" (Part No.611-16)

Edelbrock – Edelbrock Victor Jr Small-Block Ford Cylinder Head Bare, 77219 (Part No.77219)

Edelbrock – Edelbrock Classic Series Valve Cover, 41609 (Part No.41609)

Edelbrock – "Edelbrock Valve Seat For S/B Chevy Heads With 1.60"" Valves, 9711" (Part No.9711)

ARP Auto Racing – ARP Auto Racing For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile, 154-3601 (Part No.154-3601)

Remflex – Remflex Flexible Graphite, Set Of 2, 1-1/4 Inch X 1-5/8 Inch Square Port Size, 3028 (Part No.3028)

Dorman – Dorman STD Cylinder Head Bolt, 7/16-14 X 3.938 X 1-1/16 In., Hex 5/8 In. (Sold by each), 675-131 (Part No.675-131)

Victor Reinz – Victor Reinz Engine Cylinder Head Gasket Set, 02-10359-01 (Part No.02-10359-01)

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 8548 PT-2 (Part No.HS 8548 PT-2)

ARP Auto Racing – "ARP Auto Racing 1.895""Oal Stud, 1""D Adjuster Thread, 3/8""-24, 7/16""-14 Thread, 0.71""D Screw-In, 134-7124" (Part No.134-7124)

ARP Auto Racing – "ARP Auto Racing For Use With Chevy Small Block, 1.895"" Stud L, Black Oxide, Chrome, Set Of 16, 134-7104" (Part No.134-7104)

Competition Cams – "Competition Cams Stud Girdle for Ford 351C Boss with Ford Motorsport Head with 7/16"" Stud, 4016" (Part No.4016)

Edelbrock – Edelbrock Sure Seat Valve Springs, 5823 (Part No.5823)

Ford Falcon Valve Cover and Cylinder Heads List

Valve Cover and Cylinder Heads Brands You Can Trust For Your Ford Falcon

Popular Felpro Valve Cover and Cylinder Heads

Top Ford Falcon Valve Cover and Cylinder Heads from Sealed Power

Most Purchased Ford Falcon Valve Cover and Cylinder Heads from Sealed Power

FAQs for Ford Falcon Valve Cover and Cylinder Heads

What are the most purchased Valve Cover and Cylinder Heads for the Ford Falcon?

What are the top-rated Ford Falcon Valve Cover and Cylinder Heads?

Find Your Ford Falcon Valve Cover and Cylinder Heads by Year

More Popular Parts for All Makes