Ford Fairlane Air Intakes
Top Ford Fairlane Air Intakes Categories
We carry over 149 Air Intakes in inventory for the Ford Fairlane. If you’re looking for aftermarket Air Intakes for your Ford Fairlane, check out all these categories:
Essential Ford Fairlane Air Intakes
Edelbrock – Throttle Lever #1483 For Ford 1968 And Later, Gold Iridited Finish (Part No.1483)
from
$38.99
Product Features:
See More
- Converts Throttle Lever on Carb for Proper Use
- For Edelbrock Performer Series Carburetors Only
- Also Accepts Cruise Control
- Use with Appropriate Throttle Cable Plate
Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)
from
$13.99
The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45
Product Features:
See More
Product Features:
- Fits Holley® Carburetors With Center Hung Fuel Bowl
- Includes Adjusting Nut
- Includes Locking Screw
- Includes O-Ring
- Includes Washers
Wells Vehicle Electronics – Carburetor Choke Thermostat (Part No.2C1220)
from
$11.49
The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.
Product Features:
See More
Product Features:
- Application matched components ensure carburetor can be returned to like new condition.
Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)
from
$31.99
Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Product Features:
See More
Product Features:
- Rubber Material
- For Holley®, Barry Grant, And Demon Gasoline Carburetors
- No Hardware Included
- 50cc Volume
- Made iIn The USA
Edelbrock – Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415 (Part No.12415)
from
$20.99
Edelbrock part #12415 Fuel Bowl Inverted Flare Fitting is a 3/8″ inverted flare fuel inlet fitting. The fitting is designed for use with Holley 2300, 4150, 4150HP and 4160 (center hung floats only), 4500, 4500HP and Rochester Quadrajet applications up to
Product Features:
See More
Product Features:
- Brass Material
- 3/8 in. Single Barb
- 7/8-20 in. Male End
- 5/8-18 in. Female Flare
- With 3/8 in. Tube
Edelbrock – Standard Flow Carburetor Power Valve #12655 Single Stage 5.5in Hg (Part No.12655)
from
$16.99
Product Features:
See More
- The Edelbrock #12645 Single Stage 5.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
- During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
Carquest – Carburetor Choke Pull-Off (Part No.779-070)
from
$13.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
- Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
- Undergoes extensive testing and validation for proper performance and peak reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
Edelbrock – Performer Carburetor Calibration Kit #1487 for #1406 Carburetors (Part No.1487)
from
$62.99
Product Features:
See More
- Customize Carburetor Calibration and Performance
- Owners Manual has Assembly Help
- Includes Metering Rod Retaining Spring
- Includes Metering Rods
- Includes Metering Jets
- Includes Step-Up Springs
Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1793)
from
$46.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Holley – SysteMAX; Intake Manifold Gasket (Part No.108-80)
from
$48.99
Kormetal gasket used between the SysteMax II Ford 5.0 liter upper and lower manifolds.
Product Features:
See More
Product Features:
- SysteMAX II Upper/Lower Manifold
United Carb – Remanufactured Carburetor 1 Barrel (Part No.7-781)
from
$468.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
Edelbrock – Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs (Part No.12412)
from
$24.99
The Edelbrock #12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.
Product Features:
See More
Product Features:
- Steel Material
- For Holley® 4150, 4150HP, 4160; Demon King, Mighty, Race, Road, Sea, Speed; Barry Grant Claw
- Includes Lightest To Heavy
- Set of 7
- Made in The USA
Edelbrock – Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors (Part No.12403)
from
$40.99
The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly
Product Features:
See More
Product Features:
- Multi-Color
- Plastic Material
- Fits Holley® 2300, 4150, And 4160 Carburetors
- Set of 8
- Made In The USA
Edelbrock – Standard Main Jet Carburetor Metering Jet #12459 Size .058 (Pair) (Part No.12459)
from
$13.99
The Edelbrock 94 #12459 Carburetor Jets .059″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.
Product Features:
See More
Product Features:
- 59 Maximum Jet Size
- 0.058 in. Orifice Diameter
- 1/14-32 in. Thread Size
- Standard Main Jet Type
- Set of 2
Felpro – Carburetor Mounting Gasket (Part No.60081)
from
$1.89
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Edelbrock – Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors (Part No.12382)
from
$14.99
Product Features:
See More
- The Edelbrock #12382 fuel bowl gasket is designed for Holley 2300, 4150, 4160, 4175 and 4500 Carburetors.
- Kit includes two black nitrile fuel bowl gaskets.
Edelbrock – Performer RPM Ford FE 390 Intake Manifold (Part No.7105)
from
$701.99
Product Features:
See More
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
- Edelbrock Total Power Package Maximizes Gains
Holley – REPLACEMENT MAIN BODY KIT FOR 0-80457S (Part No.134-342)
from
$195.99
REPLACEMENT MAIN BODY KIT FOR 0-80457S
Edelbrock – Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange) (Part No.1223)
from
$47.99
Product Features:
See More
- Edelbrock triple chrome-plated round air cleaner #1223 work with all popular 5-1/8″ diameter Carburetors (Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra jet and Carter AFB).
- The 10″ and 14″ models have knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapter #1205 (sold separately).
- #1208, #1209 and #1221 fit all Edelbrock Carburetors.
- Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut.
- Dimensions are accurate within 1/8″.
Felpro – AIR CLEANER MOUNTING GASKET (Part No.60032)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific, providing unsurpassed quality for a seal you can trust
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Dorman – Steel Cup Expansion Plug 1 In., SC, Height 0.250 (sold by each) (Part No.555-018)
from
$2.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)
from
$20.99
The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23
Product Features:
See More
Product Features:
- Center Hung Floats
- 0.11 in. Needle Diameter
- Viton® Needle Material
- Sold Individually
- Non-Adjustable Type
Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)
from
$18.99
Product Features:
See More
- The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
- Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.
Edelbrock – Carburetor Throttle Cable Bracket #1491 For Ford Small-Block 351 Windsor (Part No.1491)
from
$22.99Product Features:
- Repositions Stock Throttle Cable Bracket
- Use With PN[1483]
- Use w/Stock Throttle Cable Bracket
- For Fords w/Cable Activated Throttles
- Fords w/Automatic Transmission Kickdown Rod
Edelbrock – Carburetor Throttle Cable Bracket #1495 For Ford 429/460 Big-Block (Part No.1495)
from
$24.99Product Features:
- Repositions Stock Throttle Cable Bracket
- Use With PN[1483]
- Use w/Stock Throttle Cable Bracket
- For Fords w/Cable Activated Throttles
- Fords w/Automatic Transmission Kickdown Rod
Ford Fairlane Air Intakes Categories
Helping You Find the Right Air Intakes for Your Ford Fairlane
You love your Fairlane. So we’ve made it easier than ever to help you find Ford Fairlane Air Intakes in our online catalog. Our inventory holds 149 aftermarket and OEM Air Intakes for your Ford Fairlane, ranging from $1.39 to $2,024.99.
We offer parts from 10 brands trusted to make quality Air Intakes for your Ford Fairlane. Before you buy, take some time to read through customer reviews. We currently have 3,921 reviews of Ford Fairlane Air Intakes from previous customers. Some of the top rated parts include Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs with 4.5 stars and Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny with 3.8 stars.
Find your Fairlane Air Intakes here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Fairlane part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Air Intakes Brands for Your Ford Fairlane
Our inventory holds Air Intakes for your Ford Fairlane from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Edelbrock, FELPRO, and Holley, all of which can keep that Ford happy.
We have Weiand parts available for your Ford Fairlane in categories like Intake Manifold Parts. Some of the top-rated Weiand parts in these categories are:
Top-Rated Edelbrock Air Intakes
Leading Edelbrock Air Intakes
We carry Edelbrock brand parts for your Ford Fairlane across several catalog categories, including Air Cleaner Parts. Some of our most reviewed Edelbrock parts include:
from
$43.99
(19)
Pro-Flo Chrome 14" Round Air Cleaner with 3" Paper Element (Deep Flange)
Air Cleaner Assemblies
from
$31.99
(10)
Pro-Flo 1000 Series Chrome Air Cleaner with Foam Element with 5-1/8" Air Horn
Air Cleaner Assemblies
from
$47.99
(9)
Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange)
Air Cleaner Assemblies
FAQs for Ford Fairlane Air Intakes
What are the most purchased Air Intakes for the Ford Fairlane?
Out of 149 Air Intakes for the Ford Fairlane, the most popular in our inventory are:
from
$456.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
Carburetors
from
$2.99
This product is not rated
Carburetor Mounting Gasket
Carburetor and Injector Mount Gaskets
What are the top-rated Ford Fairlane Air Intakes?
Top-rated Air Intakes for your Ford Fairlane based on customer reviews/ratings are:
from
$620.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
“great carb”
from
$397.99
(5)
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
“easy to install all the gaskets and parts came with it”
