Name: Molded Heater Hose: EPDM, Direct Fit, 2" Inside Diameter
Brand: Gates
SKU: 21562
Price: 25.99 USD

from

$25.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$21.99

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$29.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$26.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$50.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$46.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$42.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$33.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$36.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$5.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$37.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$55.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$43.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$8.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements