Ford F1 Performance and Racing Products
Top Ford F1 Performance and Racing Products Categories
We carry over 33 Performance and Racing Products in inventory for the Ford F1. If you’re looking for aftermarket Performance and Racing Products for your Ford F1, check out all these categories:
Essential Ford F1 Performance and Racing Products
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1447)
from
$38.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Fram – High Perf. Full-Flow Lube Spin-on (Part No.HP1)
from
$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.**
Product Features:
See More
Product Features:
- Proven protection for up to 10,000 miles
- Engineered for use with synthetic or conventional motor oils
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- The perfect balance of dirt-trapping efficiency and dirt-holding capacity
Energy Suspension – Sway Bar Bushing Set (Part No.4.5116G)
from
$36.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.4.5106G)
from
$31.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Earls Performance Product – Solo Bleed (Part No.280021ERL)
from
$32.59Product Features:
- Prevents Air Inclusion
- Direct Replacement
- For OE Bleeders
- One Person Bleeds Safely
- Without The Mess
- No Chance Of Air Bubbles
Energy Suspension – Sway Bar Bushing Set (Part No.4.5123G)
from
$30.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.4.5117G)
from
$30.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
MSD Ignition – Distributor; Flathead Ford; Ready-to-Run; 49-53 (Part No.8573)
from
$757.99
Early flathead racers and cruisers alike will be excited to see these front mount flathead distributors! These distributors are built around a CNC-machined billet aluminum housing for precise tolerances. The distributor is topped off with our own crab cap with spark plug style terminals for improved wire connections. Just under the cap and Rynite race rotor is MSD’s adjustable mechanical advance. This assembly features chromoly construction with Tig-welded weight pins to secure the precision fine blanked weights. MSD supplies different advance springs and stop bushings so you can dial-in an advance curve to meet your flathead’s specs. Just under the advance is MSD’s race-proven magnetic pick-up. This pickup, combined with a reluctor, produces accurate trigger signals that are responsible for firing the MSD Ignition control. Bring your flathead up to date with MSD Performance.
Product Features:
See More
Product Features:
- Designed for 1949-1953 8-BA Ford Flathead engines
- No CARB Exemption Order Number
- Does not require an MSD Ignition Control
- Accepts Cap-A-Dapts
- Supplied w/HEI style dist. cap/rotor/gear/roll pin/setup spacer
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1639)
from
$26.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1820)
from
$32.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Motive Gear – Differential Carrier (Part No.D3TZ4204A)
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Hurst – B-1 Shifter Boot and Plate (Part No.1147336)
from
$42.49
Designed for use with round stick shifters. Complete with chrome ID plate and mounting hardware. Measures: 4-3/8 in. x 5-3/8 in. with 3 pleats.
Product Features:
See More
Product Features:
- Complete with Mounting Hardware
- Adapt To Most Shifter Install
- Hurst Quality
- Works Well with Round Shift Levers
- Chrome ID Plate
Ford F1 Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Ford F1
You love your F1. So we’ve made it easier than ever to help you find Ford F1 Performance and Racing Products in our online catalog. Our inventory holds 33 aftermarket and OEM Performance and Racing Products for your Ford F1, ranging from $16.99 to $757.99.
We offer parts from 8 brands trusted to make quality Performance and Racing Products for your Ford F1. Before you buy, take some time to read through customer reviews. We currently have 61 reviews of Ford F1 Performance and Racing Products from previous customers. Some of the top rated parts include B-1 Shifter Boot and Plate with 1.0 stars.
Find your F1 Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford F1 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Ford F1
Our inventory holds Performance and Racing Products for your Ford F1 from 8 trusted brands. You’ll find OEM and aftermarket parts from brands like Energy Suspension, Fram, and Earls Performance Product, all of which can keep that Ford happy.
We have Mallory parts available for your Ford F1 in categories like Performance Ignition Products. Some of the top-rated Mallory parts in these categories are:
Top-Rated Fram Performance and Racing Products
Leading Fram Performance and Racing Products
We carry Fram brand parts for your Ford F1 across several catalog categories, including Performance Oil Filters. Some of our most reviewed Fram parts include:
FAQs for Ford F1 Performance and Racing Products
What are the most purchased Performance and Racing Products for the Ford F1?
Out of 33 Performance and Racing Products for the Ford F1, the most popular in our inventory are:
What are the top-rated Ford F1 Performance and Racing Products?
Top-rated Performance and Racing Products for your Ford F1 based on customer reviews/ratings are:
from
$42.49
(1)
B-1 Shifter Boot and Plate
“The website claims this is an exact fit for my S-10. I have a 5 spd 2.5L 1990 S-10. The boot/plate are about 2/3rds the necessary size to actually mou”
