Ford F-350 Super Duty Differentials

Product Features:

• Complete shim kit for Dana Spicer 80
• 4.375″ O.D. pinion bearing application only

Yukon replacement yoke for Dana 60 with a 1350 U/Joint size and 35 spline pinion.

Product Features:

• Fits Dana Spicer 60 and 70
• 35 spline
• 1350 u-joint size
• Outside snap ring design
• 3.625″ snap ring span
• 1.188″ cap diameter
• U-bolt style

10.25″ Ford carrier Supershims.

Product Features:

• Super carrier shim kit for Ford 10.25″ and 10.5″
• Interlocking design makes installation much easier

Product Features:

• Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
• Fits standard open differentials only

Product Features:

• DANA 70 INSTALL KIT HD

Remanufactured Rear Axle assemblies are completely disassembled and thoroughly cleaned and reassembled using new wear parts. Units are assembled, sealed and include backing plates, axle shafts and fluid.

Product Features:

• Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
• Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
• Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
• Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

• Fits 1999-2006 Ford 10.5″
• Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.

Product Features:

• Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
• For Trac Loc positraction applications only

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

• Cover bolt for Dana Spicer 60, 70 and 80
• 3/8″

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust

aFe Powers new rear-end differential cover brings performance engineering to the protection of your trucks rear-end. This differential cover has a 5 quart lube capacity (factory cover holds 4 quarts) at the factory fluid level line, a magnetic drain plug and a magnetic fill plug to remove unwanted debris. Built-in external fins transfer heat from the fluid to the outside air for maximum cooling. aFe has also designed a large oil level sight glass with calibration plug set to the factory fluid level to eliminate overfilling. This differential cover is constructed out of durable die-cast A356 aluminum with reinforced ribs and a wrinkle black powder-coating for maximum strength and style. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:

• Constructed of Durable A356 Die Cast Aluminum
• Reinforcing Ribs and Wrinkle Black Powder coat
• Magnetic Drain and Fill Plugs Capture Loose Particles
• Large Oil Level Sight Glass w/Calibration Plug

Differential Pinion

Product Features:

• Cover gasket
• Fits Dana Spicer 60, 70, 70U and 70HD

Yukon Carbon Clutch kit with 14 Plates for 10.25″ and 10.5″ Ford posi, Eaton style.

Product Features:

• Clutch kit
• Fits Ford 10.25″ with Eaton positraction
• Carbon fiber clutches

Yukon replacement standard open carrier case for Dana 80, 4.10 & up (NOT ABS) 35 & 37 spline.

Product Features:

• Standard open carrier case
• Does not include spider gears
• Fits Dana Spicer 80 with 35 or 37 spline axles
• 4.10 and up ratio only
• Not compatible with ABS applications

Product Features:

• Pinion preload shims for Dana Spicer 60 and 70U

Product Features:

• Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80

Dana 60 & Dana 70 Power Lok case bolt.

Product Features:

• Power Lok case bolt for Dana Spicer 60 and 70
• 7/16 x 14 thread
• 3.5″ long
• 9/16″ hex head

RngPnnKt

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

• All products are designed to meet or exceed OE quality, form, fit and funtion.

Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:

• Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
• 0.225″ diameter
• 1.870″ long

Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.

Product Features:

• Set up bearing kit
• Fits Dana Spicer 60
• Easily slips on and off carrier journals to allow for easier carrier shim adjustment

Product Features:

• D80 PINION PRE LOAD SHIMS

Yukon standard open spider gear kit for Dana 50 IFS with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

• Spider gear kit
• Fit Dana Spicer 50 open differential with 30 spline axles
• Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

Product Features:

• Oil baffle for Dana Spicer 60 and Dana Spicer 70U