Ford F-250 Radiator
Ford F-250 Radiator
Your Ford F-250 will be happy to know that the search for the right Radiator products you’ve been looking for is over! Advance Auto Parts has 38 different Radiator for your vehicle, ready for shipping or in-store pick up. The best part is, our Ford F-250 Radiator products start from as little as $118.99.
When it comes to your Ford F-250, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Radiator product and part brands so you can shop with complete confidence. Some of our top Radiator product brands are CARQUEST, and Metrix. We’re sure you will get the right product to keep that F-250 running for a long time.
We even have reviews of our OEM and aftermarket Radiator products to help you buy with confidence. Hear from other customers via the 7,240 reviews on parts for your Ford F-250.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Radiator products for your F-250, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Radiator for a Ford F-250
Use the fitment form at the top of the page to select your exact year and engine type for your Ford F-250.
-
CARQUEST - Radiator (Part No. 431386)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
cooling system
cooling system
Submitted 2018-11-05
By Charlie
From Undisclosed
Exact fit, took a little wiggling but it went right in.
Bottom Line
-
All of the parts purchased for this repair fit perfectly. Ho
All of the parts purchased for this repair fit perfectly. Ho
Submitted 2018-08-25
By Kevin
From Undisclosed
All of the parts purchased for this repair fit perfectly. However this purchase which was rather expensive DID NOT COUNT towards perk rewards
Bottom Line
-
Yes
Yes
Submitted 2018-07-09
By Shebaun
From undisclosed
Had the wrong radiator, but the manager corrected it and I was able to get my mom's vehicle back going.
Bottom Line
from $154.99
View Product -
CARQUEST - Radiator (Part No. 431329)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
I would recommend this part to anyone, perfect fit.
I would recommend this part to anyone, perfect fit.
Submitted 2018-02-28
By EDWARD
From undisclosed
fit perfect, easy to install and working great.
Bottom Line
-
Very satisfied
Very satisfied
Submitted 2018-01-26
By John
From undisclosed
Twice the thickness of the OEM radiator. The past was well packed and included hardware. The radiator appeared well made and for perfectly. For anyone relocating thier oem Ford F150 radiator I don't see any reason to buy a single core version instead of paying $6 for more for the dual core version. Application: 1997 ford f150 4.6
Bottom Line
-
Yep
Yep
Submitted 2017-10-18
By Keith
From undisclosed
Goodness
Bottom Line
from $181.99
View Product -
CARQUEST - Radiator (Part No. 431389)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
Yes
Yes
Submitted 2018-03-27
By Kevin
From undisclosed
Radiator fit just like original
Bottom Line
-
I eill biy again
I eill biy again
Submitted 2017-12-12
By Glenda
From undisclosed
Aleays good srrvice
Bottom Line
-
Great value
Great value
Submitted 2017-10-12
By Jennifer
From undisclosed
Great fit for my 2004 F250 XLT.
Bottom Line
from $173.99
View Product -
Koyo Cooling - Radiator (Part No. G1000234095KCS)
DescriptionPlastic Tank / Aluminum Core Radiator Koyo radiators are available in plastic tank and aluminum core. The Nocolok brazing line keeps the highest quality standards, bringing you superior products you can rely on. The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.
Product Features:- All Aluminum Core and Plastic Tank
- OE Style mounting brackets and hose connections
- Integrated transmission oil cooler when applicable
- Compact and lightweight
Read 1 review(s)Review snapshot ® by PowerReviews
-
yes
yes
Submitted 2018-02-16
By Robert
From undisclosed
First radiator i have bought that had all the fins straight. Quality seem far superior to the prev 2 spectra units i have bought. Install went well and unlike the 2 spectras that failed within a year and a half i did not have to fight leaking transmission cooler fitings.
Bottom Line
from $197.78
View Product -
CARQUEST - Radiator (Part No. 433545)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
Went with advanced radiator after much trouble with LMC
Went with advanced radiator after much trouble with LMC
Submitted 2017-12-14
By Kenneth
From undisclosed
Fit my 1979 f250 just like factory, very easy install.
Bottom Line
-
Not a big fan of plastic
Not a big fan of plastic
Submitted 2016-06-18
By Bullitproof306
From Peoria il
Installed easy great radiator for the price just not a big fan of plastic . But i new it when i got it
Bottom Line not recommended
-
Great!
Great!
Submitted 2012-04-19
By Reggiesr
From Richmond, Va
This Radiator is the ONLY correct replacement Advance offers for my 1978 Ford F250, 4x2, no a.c., 460/7.5 engine. Any others listed in the parts search, does not fit! I learned this the hard way!!
Bottom Line recommended
from $278.99
View Product -
CARQUEST - Radiator (Part No. 433558)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 2 review(s)Review snapshot ® by PowerReviews
-
Good Replacement Radiator
Good Replacement Radiator
Submitted 2014-09-29
By 64 Fairlane
From Bacliff, TX
Radiator is an excellent replacement for a leaking one that was about to become a gusher.
Bottom Line recommended
-
Radiator Replacement
Radiator Replacement
Submitted 2012-08-23
By Mike
From Richmond, VA
This was an easy replacement job. The new radiator dimensions were the same as the original so it slipped right into place. The only glitch was trying to reset the screw mounts for the fan shroud on top of the new radiator. The top flange on the new unit was about a 1/4" shorter than the original so the clips would not fit. Had to do some creative engineering to remount the fan shroud without using the clips.
Bottom Line recommended
from $191.99
View Product -
CARQUEST - Radiator (Part No. 432183)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
Tranny fittings don't work for 1990 F150 or 89 FSB.
Tranny fittings don't work for 1990 F150 or 89 FSB.
Submitted 2019-02-24
By Richard
From Undisclosed
On my 1990 F150 I also had to use the old transmission line fittings from the old radiator. I replaced the rad on my 89 FSB four years ago with this same model from Advance, so I was expecting the fitting issue. However, in order to lower the fan shroud for proper fit on the F150 I had to Dremel half moons in the mounting points on the radiator. The clip on shroud fasteners no longer reached far enough down but fortunately I had spare bolts, washers & nuts laying around to secure the shroud. BTW - the FSB is still going strong.
Bottom Line
-
Good radiator
Good radiator
Submitted 2018-12-06
By JOSEPH
From Undisclosed
Everything fit very well.
Bottom Line
-
I don't know if I would buy again because of the aggrevation
I don't know if I would buy again because of the aggrevation
Submitted 2018-08-02
By Dwaine
From undisclosed
Fit Great and working great but i had to use my old fittings off my 1995 Ford F150 because the ones came with radiator did not have orings therefor i had leaks on both top and bottom fittings for raditor
Bottom Line
from $141.99
View Product -
CARQUEST - Radiator (Part No. 431355)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
I highly recommend this product.
I highly recommend this product.
Submitted 2018-06-26
By Russell
From undisclosed
Perfect fit for my 1997 Ford F 150. All hose and transmission cooler connections in the right place. Radiator seems to be made of quality material. Placed my order on line and drove straight to the store to pick it up. My radiator was ready and waiting when i got there (less than 30 minutes). Great product and great service!
Bottom Line
-
If needed
If needed
Submitted 2018-06-26
By Moses
From undisclosed
One word...Exact!!!
Bottom Line
-
Store management and customer service rep was awful
Store management and customer service rep was awful
Submitted 2018-05-23
By Shayne
From undisclosed
Ordered correct part online which said in stock. Sent wife to pick up the order the next day and she was given the wrong radiator. Called to set up return and was told correct part wasn't even in stock by an inept borderline rude "manager." I've moved on to a different parts supplier. You had one job and failed miserably.
Bottom Line
from $204.99
View Product -
CARQUEST - Radiator (Part No. 432198)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
Best price and quality
Best price and quality
Submitted 2018-12-28
By Mark
From Undisclosed
Perfect fit, just like OME...
Bottom Line
-
Not for the faint of heart
Not for the faint of heart
Submitted 2018-06-07
By Greasemanicure
From Burlington NC
This radiator takes some modification to fit a 1993 F150 4.9 with A/C. The extra cooling is worth it. The modification comes in as the fan shroud mountings are different from the stock radiator. I ended up drilling two 1/4 inch holes in the rear of the radiator top about 1/2 inch from the top of the core, using the shroud for a template. That gave enough adjustment to have the shroud not drag on the fan and the bottom mate with the clips to hold them. It is also one for a truck with an automatic tranny, but you can ignore the transmission cooling ports.
Bottom Line recommended
-
Perfect fit for 1991 F-150, Auto, 2 wh. drive, 4.9L 6 cyl.
Perfect fit for 1991 F-150, Auto, 2 wh. drive, 4.9L 6 cyl.
Submitted 2018-05-03
By Tony
From Powhatan, Va
Easy install, no issues. Includes drain petcock, tranny cooler, and some adapters. Piece of cake install. Wish life was this easy.
Bottom Line recommended
from $129.99
View Product -
CARQUEST - Radiator (Part No. 432184)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
It works but is very fragile
It works but is very fragile
Submitted 2017-11-11
By Gary
From undisclosed
Good price and it works. Beware that it is very fragile, soft aluminum.
Bottom Line
-
Easy install, great value, exact fit.
Easy install, great value, exact fit.
Submitted 2017-04-20
By Christopher
From undisclosed
Exact fit for a 1995 Ford F-150 XL with 4.9L inline six engine w/A/C and 5spd OD transmission; 173400 miles on odometer. Easy installation and enough clearance to do job without removing fan once you remove the fan shroud. Simply drop radiator into place and let side supports fit into the rubber supports, then bolt top of radiator to frame. Then install hoses and shroud and you are finished. Note that the OEM Ford spring clamps are very difficult to access and remove on the lower hose! Also, do not take the advice of the Advance Auto Parts counter employee and re-use the spring clamps (lower hose clamp to engine block leaked). Purchase new 2 1/4 inch screw clamps instead. You'll be glad that you did. Upper hose clamps were still okay and reusable. This radiator does NOT come with a radiator cap. Buy a new 13 psi one and install. With discount applied, cost of this radiator was ridiculously cheap; replaced radiator, hoses and thermostat at very little cost.
Bottom Line
-
Quality Unit
Quality Unit
Submitted 2016-11-05
By Gary
From Fort Myers , Florida
Fit and finish is great. Except for the manual trany fittings it was perfect!!!
Bottom Line recommended
from $118.99
View Product -
CARQUEST - Radiator (Part No. 432194)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
I would buy this product again
I would buy this product again
Submitted 2017-06-03
By Daniel
From undisclosed
Have had not a single issue.
Bottom Line
-
Plastic Top on Metal core; failed gasket
Plastic Top on Metal core; failed gasket
Submitted 2013-07-05
By Ohmz
From Tomball, Texas
The radiator core is metal with crimped on tops made of plastic. The gasket between the metal core and plastic top failed shortly after warrant expired.
Bottom Line not recommended
-
Fit like the OEM radiator
Fit like the OEM radiator
Submitted 2012-01-15
By galaxieblue
From Zebulon, nc
The radiator was relatively easy to install with a helper since it is heavy. I replaced the factory radiator mounting clips (since they fell apart when disassembled) with bolts,washer and lock nuts. Everything works as expected. Time will tell on durability.
Bottom Line recommended
from $275.99
View Product -
CARQUEST - Radiator (Part No. 431383)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
JUST OK..
JUST OK..
Submitted 2017-06-04
By greg
From undisclosed
TRANS FITTINGS DID NOT FIT HAD TO RE USE MY OLD ONES... BUT RADIATOR WAS OK... NOT TRIPPLE CORE LIKE OLD ONE... BUT WILL DO.
Bottom Line
-
Watch out for out of spec fittings
Watch out for out of spec fittings
Submitted 2017-03-09
By Radiator Rob
From Montgomery, TX
After installing the radiator, one of the fittings on the radiator that connects to the transmission cooling lines would would not thread up. Had to pull the new radiator and return to store. Fortunately, they had another unit and exchanged fittings. Second worked a charm.
Bottom Line
-
Good quality
Good quality
Submitted 2014-11-04
By Brad da Man
From Fitzgerald, GA
It has not been quite a month yet that I got this radiator and put it in my 97 Ford F-150 right, my old one had a leak on the side under the hose up to the top just about right, I did not want to be stranded on side the road, no way so I had to get a all new radiator, time will tell how long it will hold up. I like the warranty on it. I went from a 2 row to a 1 row. no more leaks as of now with the all new radiator, thanks AAP for a good radiator, it gets even better, I ordered it online right, I saved 40% off of it by using a coupon/promo code that got sent to me via email, guess how much I saved on it, $50.00, that's alright there. I also went on and replaced the thermostat and gasket whether it needed replacing or not to be on the safe side. I replaced the radiator because it was getting old and did not like the idea of being stranded on the road when it began leaking. It was very easy to replace and I had no problems. A great quality radiator. Other than that my truck could of ran hot if I did not hurry up and get that seen about, and the engine could of over heated too and make matters worser.
Bottom Line recommended
from $176.99
View Product -
CARQUEST - Radiator (Part No. 433393)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
Vgood things to say.
Vgood things to say.
Submitted 2018-01-18
By Gary
From undisclosed
Great price due to online discount. Very minor damage To the fins. Wish I could get a front wheel drum also but don't know if you can get any.
Bottom Line
-
Prompt delivery, good product
Prompt delivery, good product
Submitted 2013-06-07
By Jakalhaups
From Washington
My vehicle is a 1972 Ford ClubWagon(E-100) When the radiator arrived, I was a little alarmed because the cooling surface on the new one is considerably smaller, but the holes on the side tab line up ok. Also, the upper radiator hose attachment is on the opposite side. I don't know if it makes any difference, I just loosened the hose and twisted it around to make it fit. I am going on an 800+ mile roadtrip next week, so I will be able to comment on performance at that time. For now, the van starts and runs fine.
Bottom Line recommended
-
Sturdy radiator, doing its job.
Sturdy radiator, doing its job.
Submitted 2013-04-15
By Winding Road Classics
From Willis, TX
I put this in a 1966 F-100 as indicated by the website. It was not a drop in radiator for a restoration though. My truck is all original, but not a show vehicle at all. I drive it daily and use it as a truck. I had to take out the side panel of the grill as this radiator was longer. The mounting plates were at the rear of the tanks, not the front, so I had to cut small pipe as spacers to hold the radiator in the right spot. The holes lined up on one side, but not the other, and the holes needed enlarging to accept 3/8" bolts, which is what the truck originally had. All that being said, it is working perfectly, truck drives at the same temperature as it did before, and as the core is a little bigger, the cooling should be more consistent as the summer heat commences later this month of April in Southeast Texas. I will use this website again when I need auto parts.
Bottom Line recommended
from $214.99
View Product -
CARQUEST - Radiator (Part No. 432186)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
4 star
4 star
Submitted 2018-12-29
By Dallas
From Undisclosed
The supplied brass fittings for transmission lines leaked trans fluid at radiator tank regardless of how tight I had them. Had to use thread sealer. Other than that everything is great.
Bottom Line
-
Good product but bad website description
Good product but bad website description
Submitted 2017-08-15
By David
From undisclosed
I will give the product 5 stars as it seems to work fine and fit my vehicle. But I will give the website description of the product only 1/2 star because it described 2 different radiators wrongly... it said one was for a vehicle with a/c and theater one for a vehicle without a/c.. thats is incorrect!! they are based on thickness. I used a 20% speedperk discount code to buy the first radiator online based on the descriptions ( because my car has a/c) and had to return it. I lost my 20% savings because I already used the code and the store wouldn't honor it because it was an online order.
Bottom Line
-
Yes i will continue shopping with advance
Yes i will continue shopping with advance
Submitted 2017-05-25
By karcina
From undisclosed
It was perfect easy installation bc it hooked up exactly like the original one i love shopping with advance auto parts for all my automotive needs
Bottom Line
from $125.99
View Product -
CARQUEST - Radiator (Part No. 433433)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
Good fit just what I needed
Good fit just what I needed
Submitted 2018-06-27
By 67highboy
From Grand Rapids mi
Bought this radiator for my 67 f250 4WD not listed as compatible but fit great only diff was offset of fill spout didn't cause a problem . Lower outlet listed as 2 inch actually was 1 and 3/4 but came with adapter sleeve , made it work
Bottom Line recommended
-
I would definitely buy this again.
I would definitely buy this again.
Submitted 2016-11-05
By Bob
From Pittsburgh
Easy to install and fits perfectly
Bottom Line recommended
-
Plastic/aluminum replacement, not OEM.
Plastic/aluminum replacement, not OEM.
Submitted 2013-10-25
By Stan
From Ellijay, Ga
Unlike the original replacement radiator, this one has plastic/composite tanks and an aluminum core. By all appearances, it should improve cooling but it is not a good replacement for a restoration. It was just slightly wider than the original which made for a snug fit but with a little hand pressure it slid in between the core support braces. I would recommend for a daily driver but spend the extra for a restoration.
Bottom Line recommended
from $151.99
View Product -
CARQUEST - Radiator (Part No. 433561)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
not happy
not happy
Submitted 2014-12-20
By mike
From north carolina
brass fittings supplied with radiator are not correct,someone needs to learn how to measure.does not fit factory supports or hold downs..and get this my truck runs about fifty degrees hotter....no flow.will take back tomorow..
Bottom Line not recommended
-
Easy Install
Easy Install
Submitted 2014-11-15
By Big Blue Ford
From Northern, New Jersey
Direct replacement for my 84 F150. Was a disapointed when picture originally showed copper unit, than was changed to aluminum and plastic. Also this replacement is a 2 row core, not a 3 row core.
Bottom Line
-
Well...it works like it should!
Well...it works like it should!
Submitted 2012-10-01
By Eric
From New Britain, CT
I am rating this upon recent installation. I've had similar radiators before with the same manufacturer tag that have lasted, and being it's brass, im pretty confident about it lasting. If some years past the warranty it should leak, at least you can solder it back together! I should also note that I used it on a manual transmission, hence why I said the install was easy. The cooler plugs come pre-installed and do not require any tightening or teflon, so no hassle there. If you have an automatic, it comes with the brass fittings for the trans lines.
Bottom Line recommended
from $191.99
View Product -
CARQUEST - Radiator (Part No. 436002)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
Decent fit but liteweight unit
Decent fit but liteweight unit
Submitted 2013-10-26
By El Kabong
From Mi
This unit fit well BUT is very lite alum/plastic. Ad says 4 row, specs say 3 row, answers say 3 row. TRUTH is a 2 core unit w/cores split into 2 halves. Even Advance chat help doesn't have a clue what the heck they are talking about. Customer help is ridiculous. If you can afford a better radiator, buy it. If not get this one.
Bottom Line recommended
-
not exact fit
not exact fit
Submitted 2012-09-17
By boss
From camp hill pa
This radiator is advertised as a exact fit for 1977 F250 w/400 cid. The core and tanks are correct but the mounting flange wasn't for a 77. It took a lot of time to modify the radiator support to fit. The easiest way would of been to re-solder the flange from the old radiator and cut the instal time down. No adapter kit was included as stated on the box.
Bottom Line not recommended
-
Ready-Rad in 77 F150
Ready-Rad in 77 F150
Submitted 2012-04-30
By pshoremount
From Winchester, VA
This did not bolt to my 1977 F150 as it said it would. I had to make it fit by using some other bolts that I got from the hardware store. It also said there were some directions or something but never found them in the box. It works, but dissapointed and took much longer than it needed to.
Bottom Line not recommended
from $261.99
View Product -
CARQUEST - Radiator (Part No. 433480)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
Won't fit, not brass as pictured
Won't fit, not brass as pictured
Submitted 2016-06-12
By GBAT
From Chesapeake, VA
Delivery was reasonable
Bottom Line not recommended
-
Would not fit !
Would not fit !
Submitted 2012-03-18
By LD
From asheville n.c. 28803
Use truck for church use.
Bottom Line not recommended
-
Excellent Radiator-All brass-Quality
Excellent Radiator-All brass-Quality
Submitted 2010-05-20
By TEDDYBEAR
From MELBOURNE, FL.
It is an excellent radiator (all brass quality) , lifetime warranty for the dollar. Direct fit, no mods.
Bottom Line recommended
from $282.99
View Product -
CARQUEST - Radiator (Part No. 433395)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
Returned for refund
Returned for refund
Submitted 2013-08-06
By New is not always better
From Pennsylvania
The radiator may not have been the right one, but the box did have the correct part number. It was suppose to be all metal but it was plastic. The fan shroud was larger than the radiator, and It did not even span the opening of the radiator support to reach the mounting points. In the end I spent the $55 and had my original one cut apart and cleaned no warranty but it is a much better quality.
Bottom Line not recommended
-
Junk!!!!!
Junk!!!!!
Submitted 2012-04-07
By Reggiesr
From Richmond, Va
I bought this for my '78 F250 w/460-7.5 engine, to replace my original Super Cooler radiator. This radiator does not fit!!!! My fan shroud is larger than this tiny radiator! I purchased the 433395 first and it didn't fit either! I'm done with Ready-Rad Radiators!!!!!! Shame on you Advance Auto Parts for carrying this junk! I'm on my way back to the store for ANOTHER refund!
Bottom Line not recommended
-
Fit like a glove
Fit like a glove
Submitted 2011-09-12
By Tripple B
From Pittsburgh, PA
I originally purchased the 433433 radiator, plastic tanks with aluminum core, but that was 2 1/8 inches too wide, so it's not a direct fit. I had to go with the more expensive 433395, all metal. It fit perfectly into my 78 F-250, 2WD, no A/C, manual transmission. The inlet and outlet ports are too small but there is an install kit supplied. The kit consists of two rubber adapters, one for the top hose and one for the bottom hose. The kit was hard to find because it was jammed up inside one of the foam corner protectors, so look for it. Also, get some 1 inch bolts for your fan shroud. The original has the shroud screw directly to the radiator, this replacement only has holes, so 1 inch bolts, each with two flat washers, a lock washer and a nut will work. The fill cap is set at an angle toward the front of the vehicle whereas the original was level to the top. This difference didn't pose any issue. It's light, but seems sufficient to handle the cooling of the engine. Hope this helps.
Bottom Line recommended
from $172.99
View Product -
CARQUEST - Radiator (Part No. 433444)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
not honest this is rebuilt
not honest this is rebuilt
Submitted 2013-07-04
By mike
From smyrna, tn
you did a poor job of preparing my radiator for shipping. there was no packing material at the bottom of the box which resulted in the lower hose connector being bent. as you know i left it at the smyrna store. i didn't trust myself to say anything at that time. do you want to try again?
Bottom Line
-
priced right but no prize
priced right but no prize
Submitted 2011-12-23
By tricky Rick
From Warrior, AL
Ordered this radiator to fit 1973 Ford F-100 with 360ci. website said direct fit but mounting brackets were not made to fit my truck. I had to have local radiator shop to remove and weld my exsisting radiator brackets to make it fit. The radiator is made of metal and did not have any leaks when installed. I would have returned product but needed my truck to drive to work....
Bottom Line not recommended
-
Does not fit 1966 F-100 use 43-6002
Does not fit 1966 F-100 use 43-6002
Submitted 2010-11-26
By Eyeball
From Raleigh, NC
Just as the guy above stated, the mounts are towards the fan instead of towards the support frame side. After going back to the store and sitting in front of the computer with a sales guy for a 1/2 hour we found the 43-6002. Turns out it is an exact match to the stock radiator, mounting holes and all. I give the 43-6002 a 5 start review.
Bottom Line not recommended
from $251.99
View Product -
CARQUEST - Radiator (Part No. 433397)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 1 review(s)Review snapshot ® by PowerReviews
-
Ford Pickup Radiator
Ford Pickup Radiator
Submitted 2010-06-25
By StudyUNC
From Raleigh, NC
Got the radiator timely. Was disappointed when I took it out of the box. Where the rad cap goes, the design had the opening slanted, mine was not. While I have no doubt the radiaotor would have functioned fine, you could tell it was made in China - I just could not being myself to put it on my classic truck. Price was reasonable, though.
Bottom Line not recommended
from $156.99
View Product -
CARQUEST - Radiator (Part No. 436009)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
Read 3 review(s)Review snapshot ® by PowerReviews
-
Poor Quality
Poor Quality
Submitted 2012-04-24
By Crowbar
From San Antonio, Texas
Radiator mounts were welded 1/4" too long to fit into truck. Radiator had an extra drain port below the cap (that could not be closed off by the cap) that was externally "plugged" with a rubber cap and a tiny hose clamp. If this "plug" ever failed, coolant would POUR out of the radiator. (NOTE: the original radiator did not have this port.) When I called Advance Customer Service to get my $50 coupon (before I discovered it did not fit), the supervisor with whom I spoke changed the offer to something substantially less appealing. She REFUSED to make good on their original offer. In review : radiator did not fit; design flaw; a supervisor changing the coupon offer ...... Yes, I returned this radiator.
Bottom Line not recommended
-
Horrible Customer Service
Horrible Customer Service
Submitted 2011-12-31
By Nick
From Folsom, CA
Have not yet received a working radiator. First radiator was shipped with no padding whatsoever, holes in box, terrible tape job - had a huge hole and several gashes in it. Was told new one would be overnighted, now told that it will arrive a FULL WEEK LATER. Can't drive my truck for another week now. Horrible customer service, no discount, no expedited second radiator - don't buy from here...
Bottom Line not recommended
-
horrible quality
horrible quality
Submitted 2010-01-08
By SINFULLYGOOD
From new haven, ct, 06511
it's not nice to pay hard earned funds , for a product made in china, that is made lke garbage. it will work, but next time i want nice looking peices of craftsmanship for my car. just horrible
Bottom Line not recommended
from $274.99
View Product -
CARQUEST - Radiator (Part No. 432148)
DescriptionCarquest® premium-quality radiators meet or exceed OE specifications and undergo stringent testing to ensure superior performance and reliability.
Product Features:- Manufactured with high tensile strength aluminum with enhanced rubber and plastic compounds- For overall strength and durability
- Tube reinforcements included with larger radiators - Solves leading industry failure point by adding rigidity and reducing the stress on the end tubes
- High-efficiency cores (where applicable) - To increase the total amount of tubes and fins, while decreasing the core thickness, providing more cooling in a narrower design
- 100% triple-tested
- Thermal tested for durability and extreme temperature changes
- Transmission and oil coolers are 100% leak tested prior to installation
- Final assembly is 100% leak tested
from $373.99
View Product -
Metrix - Radiator (Part No. G1000197266MTX)
DescriptionPlastic Tank / Aluminum Core Radiator METRIX OE Style Aluminum Core Radiators are guaranteed to match the exact specifications as the factory installed radiator. METRIX provides an OE quality part that will fit the same as the original manufacturer's product with no need to drill holes, move fittings, or stretch hoses. All METRIX radiators, tanks, cores, dimensions and materials meet the vehicle manufacturer's strict OE standards and are required to pass rigorous performance and durability tests. METRIX radiators are packaged with all necessary accessories for a successful install, including cooler fittings, fan shroud clips, and mounting brackets.
Product Features:- OE Quality - Higher quality and reliable performance compared to competitive products
- Exact fit - No additional time consuming steps needed for installation
- OE Engineered - Lightweight and improved engine cooling performance
- Aluminum Core - Advanced design for optimum heat transfer
- Oil Cooler - Integrated OE design for efficient thermal management
from $293.78
View Product -
Keystone Collision - Platinum Pro Radiator (Part No. RAD394)
DescriptionNew, Platinum Pro Radiator, 18 X 23 3/4 Core
Product Features:- Meets All Federal Motor Safety Standards
- No Drilling Or Modifications Needed For Installation
- Same Form Fit As OE
from $289.99
View Product
Year Range for Ford F-250
People also search Advance Auto for these popular years of Ford F-250 parts:
FAQs for Ford F-250 Radiator Products
What are the most popular Radiator products for the Ford F-250?
Our most popular Radiator products for the Ford F-250 are:
What are the top-rated Ford F-250 Radiator products?
Top-rated Radiator products for your Ford F-250 based on customer reviews/ratings are: