Ford F-150 Performance and Racing Products

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

• Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
• Not intended for use in emission controlled vehicles.

It’s easy to overlook the small details. For engine builders focused on the larger components like camshafts, cylinder heads and pistons, small parts are often forgotten until the final stages of engine assembly. COMP Cams Engine Finishing Kits include those often missing parts like woodruff keys, cylinder head alignment dowels, cam bolts, cam eccentrics and timing cover and oil pump dowel pins that are so crucial to properly assembling your engine.

Product Features:

• Includes parts such as woodruff keys, cylinder head alignment dowels, cam bolts, cam eccentrics, timing cover and oil pump dowel pins
• Available for various engine applications

Product Features:

• 4.5 in. Cylinder Bore Diameter
• 0.048 in. Thickness
• 12.5cc Volume
• Gray Color
• Two Piece Configuration

Product Features:

• Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
• Set of 16
• 1.50 in. Outside Diameter
• Steel Material
• Black Oxide Finish

Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:

• Opens At 195 Degrees
• Designed to Resist Large Variations of Coolant Pressure at High RPM
• Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
• For High Performance Street, Drag Race, and Oval Track
• Copper & Brass Construction – Resists Corrosion
• High Flow

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

This Spectre OEM replacement air filter is an easy to install performance option for the stock cone shaped air filter in multiple Ford applications. With its HPR (High Performance Replacement) synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock oval and egg shaped Ford air filter housings, this air filter includes sealing gaskets at the base of the air filter to insure a proper seal for great engine protection.

Product Features:

• HPR OE Replacement Air Filter
• High flow replacement filter designed to fit perfectly in your stock air box
• Engineered for increased flow and greater performance
• Fits multiple Ford applications
• Factory pre-oiled and ready to use
• Easy to install with no special tools or skills required

Made from heavy gauge steel, this chrome plated rear end cover comes complete with bolts and gaskets.

Product Features:

• Chrome plated steel for looks
• Includes bolts and gasket

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

• Assures Longer Lasting Cab to Bed Alignment
• Replace to Restore Ride Height
• Gain Durability
• Stronger Than Original Rubber Mounts

Get premium control and performance with Rancho RS9000XL struts. Recognized as the first nine-position manually adjustable ride control series in the off-road market, RS9000XL struts are ideal for on- and off-road use, towing and more.

Product Features:

• NINE LEVELS OF PERFORMANCE – Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• DESIGNED FOR HARDWORKING VEHICLES – Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
• INDUSTRY FIRST – Recognized as the first nine-position manually adjustable shock series in the off-road market
• REDUCES FADE – Nitrogen gas pressurized to 100 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
• STRONG AND DURABLE – Features an application-specific nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and sintered iron piston for enhanced structural integrity
• SMOOTH PERFORMANCE – Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
• BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life
• BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
• Added strength and durability
• Provided 9 different levels of strut performance
• Premium long lasting finish
• Enhances strut performance and durability
• Added protection for the strut rod and oil seal

One-Piece Housing with Sight Window:A custom computer designed housing eliminates the use of multiple components. Its roto-molded and made from heat soak resistant cross-linked polyethylene, ensuring the coolest air intake charge possible. A clear sight window allows for filter inspection without removal of the airbox. The housing is designed to retain the same stock mounting points as the OE intake system for a hassle-free installation.Dual Inlet Large 5-Layer Performance Air Filter:This sealed intake system utilizes a radial flow performance air filter with five pre-oiled progressive cotton gauze media layers for maximum performance. The unique filter-to-housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process.Dual 3″ Mandrel-Bent Tubes w/ Custom Silicone Coupling:Dual mandrel-bent wrinkle-black powder-coated aluminum intake tubes direct unrestricted airflow from the filter to the throttle body for more horsepower and torque. A custom reinforced silicone coupling merges the dual tubes into a single outlet to connect to the throttle body.Premium Hardware:Premium stainless-steel worm-gear clamps provide the best corrosion resistance possible. Momentum XP intakes are designed with fewer parts for a quick and simple installation.

Product Features:

• Dyno-Proven Gains up to +20 HP and +18 lbs. x ft. TQ
• Outflows Factory Intake by 41%
• Enjoy Lifelong Performance with a Washable and Reusable Pro 5R Air Filter
• One-Piece Roto-Molded Housing Captures Air Directly from the Front of the Truck

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

• Absolutely the most accurate way to trigger the ignition
• The non-magnetic pickup cannot be false triggered.
• Powerful magnets are embedded in a billet aluminum trigger wheel.
• Incl. brackets/mounting hardware to fit a variety of engines

Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000 steering stabilizer and installation brackets.

Product Features:

• COMPATIBILITY – Designed for a variety of Ford trucks and SUVs
• IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
• ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires.
• ENGINEERED TO LAST – Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
• EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
• EASY TO INSTALL – Includes one Rancho RS5000 steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
• RESISTS CORROSION – Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
• PRECISION DESIGN – Brackets are CNC cut and bent to exact specifications for a perfect fit
• BUY WITH CONFIDENCE – Comes with Rancho’s limited warranty

Product Features:

• Designed To Match Port Openings Of Cylinder Heads
• Excellent Free-Flowing Seal

Product Features:

• Capable of 300 plus horsepower when matched with the Edelbrock Performer Power Package
• 1.90 in. intake valves are for use with stock pistons
• Exhaust valve is 1.60 in.
• 60cc combustion with 170cc intake port
• Flat Tappet Camshaft Type

Put up to 40hp and 51lbs. x ft. torque to your N54 today! The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase turbo boost to an optimum level throughout the entire RPM range. The result is a harmonious balance between power, throttle response and drivability. This module provides a hassle-free installation with no cutting, drilling or splicing required during the 30 minute installation time. Factory electronic accessories are not affected by installing the Scorcher module.

Product Features:

• Direct Plug And Play Power
• Blue LED Power Light
• OEM Style Connectors
• Instant Increase In Horsepower And Torque

Product Features:

• Firm in the Center Yet Soft on the Outside
• Allows Flex and Pivot When Needed

Edelbrock part #21213 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8’s without EGR. Will not fit Boss 302 or 255 c.i.d. V8’s. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket

Product Features:

• Idle-5500 RPM Range
• Dual Plane Type-4150 Style Flange
• 3.5 in. Front Height, 4.12 in. Center Height, 4.75 in. Rear Height
• Black Powder Coated Finish
• Made In The USA

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

• Best with aftermarket torque converters and 9.5:1 compression.
• Great high RPM power.
• Easy on valve train parts.
• Can be used with mild ratio rocker arms and traditional performance valve springs.

Product Features:

• Case-Hardened Tubing
• Surface Hardening
• Welded Ends
• 0.3125 in. Diameter
• Use with or without Hardened Steel Guideplates

MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase

Product Features:

• Rotor phasing can be adjusted.
• Ideal When Atomic TBI Is Controlling The Timing

Edelbrock #88433 Water Pump Ford 1970-78 302 & 1970-87 351w v8 black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cool

Product Features:

• Standard Impeller Rotation
• 0.625 in. Pilot Shaft
• 0.750 in. Ball/Ball Bearing
• 5.70 in. Block To Hub Height
• Black Finish

Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:

• Maximum Cooling for Street and Racing Engines
• Internal Passages Are Balanced for Maximum Flow
• Impeller is Larger than Others For Max Pressure
• Impeller Vanes Dramatically Increase Flow Rates
• Equal Distribution to Both Sides of Block
• Only Flows in One-Direction for Optimum Efficiency

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

• Service Part
• No Moving Parts To Wear Out
• Self Contained Unit
• Can Drive OEM
• Can Drive High Performance Ignition Coils

Product Features:

• Service Part
• Makes Connections Quick And Easy