Ford F-150 Drive Shafts and Axles

Product Features:

• BUILT TO LAST: Advanced heat treatment process for strength
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
• RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Product Features:

• Design type: spring loaded; single-lip
• Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:

• Includes axle bearing and seal
• Services one side
• Torrington Brand
• 2.530″ O.D.
• 1.620″ I.D.

AxleHubBolt

9.75″ Ford C-Clip.

Product Features:

• C-clip
• Fits Ford 9.75″

Product Features:

• Stub axle bearing
• Fits Ford 7.5″ IRS, 8.8″ IRS and 8.8″ IFS

The bolts that secures the right and left rear hubs to the axle on certain 2021-2025 Ford F-150 trucks equipped with the Max Tow package have been known to shear off after day-to-day driving, a modest number of towing trips or ventures off-road. Failure symptoms include the sound of brakes that are dragging (a result of the brake rotor moving freely against the hub), a rattle caused by sheared bolt heads trapped inside the assembly and in extreme cases, severe changes in handling. The dealer solution is to replace axle assemblies with the same original equipment design, inviting a future similar failure. Our patent-pending Dorman OE FIX axle assembly eliminates the thin-walled internally-threaded axle end of the factory shaft design and the failure-prone bolt that connects it to the hub. The upgraded axle shaft features an externally-threaded male end and matching nut to capture the axle end, resulting in a more secure connection between the hub and the axle. The assembly is designed for a straightforward installation and a longer-lasting repair that can prevent potentially dangerous vehicle control issues and multiple dealership repair visits that can keep a customer vehicle out of commission for several days. This kit contains the axle shafts, spacers and nuts required to replace one left rear axle assembly and one right rear axle assembly. For only the right side assembly, select Dorman part number 630-050; for the left side assembly, select Dorman part number 630-051.

Product Features:

• Upgraded repair – this pair of patent-pending Dorman OE FIX axle assemblies eliminates the thin-walled internally-threaded axle shaft ends of the OE design and the failure-prone hub bolts
• Restores performance – designed for a straightforward repair that can prevent vehicle control issues and multiple dealership repair visits that can keep a customer’s truck out of commission for days
• Position-specific – this kit contains one right rear axle assembly and one left rear axle assembly engineered and upgraded for selected 2021-2025 Ford F-150 trucks equipped with the Max Tow package
• Also available – if your repair requires only a right side assembly, select Dorman part number 630-050; for the left side assembly, select Dorman part number 630-051

Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.

Product Features:

• Adapter washer
• Fits Ford 9″
• Adapts 28 spline pinion into 35 spline pinion support

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

• Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
• 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
• Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
• Serviceable construction – non-staked universal joints are designed for future serviceability

Yukon 1541H replacement outer stub axle for Dana 44 IFS with a length of 9.92″ inches. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H front axles come with a one year warranty against manufacturing defects.

Product Features:

• Fits 1980-1996 Bronco and F150
• Outer stub
• 19 spline
• 9.92″ from end of splines to center of u-joint bore

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:

• MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
• HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
• READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
• For Years: 1955-2018
• Weight approx: 3 Lbs
• BEARING ID / BORE: 1.3780 INCH / 35 MM
• CENTERLINE: 2.28 INCH / 58 MM
• MOUNT WIDTH: 6.62 INCH / 168 MM
• STYLE: ROUND FRAME
• COMPLETE MOUNT

AXLE STUD , 58MM X M14-2.0 .

This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
• Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).

Product Features:

• Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
• Intalls next to side gear

This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Axle seal for semi-floating Ford and Dodge with R1561TV bearing.Yukon Mighty seal.

Product Features:

• Rear axle seal
• Fits Ford and Dodge applications
• 2.985″ O.D.
• 1.700″ I.D.

Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• 100% new axle and components
• New axle nut or attaching hardware included when applicable
• Bearings, races and housings are heat-treated for longer life
• Precision-engineered seal mating surfaces for leak-free performance
• High moly CV joint grease with stainless-steel boot bands

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:

• Fill plug
• Fits Ford 9″

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• RIGHT TYPE — Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
• PREMIUM MATERIALS — Precision manufactured using high-quality materials for outstanding durability and performance
• OE-STYLE DESIGN — Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

• Carrier bearing puller
• Works with an impact gun to safely and easliy remove carrrier bearings
• Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

DrvShftPinYoke

The components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of an axle of a vehicle or trailer. Check the leaf spring dimensions and other relevant application details to select the right type and size U-bolt kit for your needs.

Product Features:

• Reliable hardware – the components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of a vehicle or trailer axle
• Check fit – carefully review the dimensions of the leaf springs that will be used and other relevant application details to select the right type and size U-bolt kit for your needs
• Durable construction – the components in this kit are engineered from quality materials for reliable performance and long service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Yukon hardcore drive flange kit for Dana 44, 19 spline outer stubs. Non-engraved caps..

Product Features:

• Drive flange kit
• Fits Dana Spicer 44 with 19 spline outer axles
• Includes two drive flanges, two caps and all necessary hardware

Product Features:

• Axle o-ring
• Fits Ford 10.25″ and 10.5″