Ford Explorer Drive Shafts and Axles

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

• High-precision and High-quality components used in all KITs
• Coverage of classic and new high-tech solutions for the best system coverage

The factory power take off unit (PTU) on certain Ford, Lincoln and Mercury vehicles often fails when extreme temperatures overheat the internal lubricant. The heat can cause catastrophic damage so severe that it becomes nearly impossible to salvage and rebuild the PTU assembly. In extreme cold conditions, the factory seals can fail and cause oil to leak from the unit. Common symptoms of these problems can include a metallic rattling sound and/or an unusual, natural gas-like scent from beneath the vehicle. This patented, 100-percent newly manufactured Dorman OE FIX PTU has been redesigned for greater resilience during thermal extremes, and features an added heatshield to reduce internal temperatures as well as a drain plug to allow easy replacement of the gearbox lubricant. Upgraded seals also help prevent premature degradation in extreme cold temperatures, providing an all-around more reliable replacement. For vehicle owners, that means a more permanent replacement. For fleet managers, it can help decrease maintenance costs and vehicle downtime.

Product Features:

• Upgraded design – this patented, 100-percent newly manufactured PTU is engineered and tested to increase durability compared to the factory part on certain Ford, Lincoln and Mercury vehicles
• Better heat resistance – incorporates a heat shield not found on the factory PTU that helps reduce heat transfer to the gearbox lubrication by up to 30 degrees Fahrenheit to prevent thermal breakdown
• Greater cold resistance – seals are made from an improved material that can withstand temperatures as low as -40 degrees Fahrenheit and help prevent future oil leaks
• Added serviceability – unlike the original equipment PTU, this replacement includes a drain plug to allow for easier routine servicing of the gearbox lubrication to further help prevent future issues

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

• Built to match O.E. form, fit and function.
• 100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
• All slip yokes are lubricated to prevent premature wear.
• Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
• Measurement Method: Measurement is taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft.

Monroe Magnum Axle Shaft Dampers are designed to replace many late model original equipment dampers.

Product Features:

• Half inch Piston Rod: Heavy-duty nitrocarburized rod for long service life
• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
• Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
• Micro-Cellular Gas Design: Allows unit to be mounted horizontally.
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

Product Features:

• CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
• PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
• SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
• OE-STYLE DESIGN: Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
• Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: spring loaded; multi-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

Product Features:

• RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
• PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
• OE-STYLE DESIGN: Engineered to meet OE specifications
• COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
• RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Anchor 6062 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
• HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
• READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
• For Years: 1984-1998
• Weight approx: 2 Lbs
• BEARING ID / BORE: 1.1811 In. / 30 mm
• CENTERLINE: 2.20 In. / 56 mm
• Mount Width: 6.00 In. / 152 mm

N

Product Features:

• High moly CV joint grease with stainless-steel boot bands

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Design type: springless; single-lip
• Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
• Good low temperature capability
• Low swell in hydrocarbon fluids
• Delivers quality and reliable performance for every type of repair

This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

The factory power take off unit (PTU) on certain Ford and Lincoln vehicles often fails when extreme temperatures overheat the internal lubricant. The heat can cause catastrophic damage so severe that it becomes nearly impossible to salvage and rebuild the PTU assembly. In extreme cold conditions, the factory seals can fail and cause oil to leak from the unit. Common symptoms of these problems can include a metallic rattling sound and/or an unusual, natural gas-like scent from beneath the vehicle. This patented, 100-percent newly manufactured Dorman OE FIX PTU has been redesigned for greater resilience during thermal extremes, and features an added heatshield to reduce internal temperatures as well as a drain plug to allow easy replacement of the gearbox lubricant. Upgraded seals also help prevent premature degradation in extreme cold temperatures, providing an all-around more reliable replacement. For vehicle owners, that means a more permanent replacement. For fleet managers, it can help decrease maintenance costs and vehicle downtime.

Product Features:

• Upgraded design – this patented, 100-percent newly manufactured PTU is engineered and tested to increase durability compared to the factory part on certain Ford and Lincoln vehicles
• Better heat resistance – incorporates a heat shield not found on the factory PTU that helps reduce heat transfer to the gearbox lubrication by up to 30 degrees Fahrenheit to prevent thermal breakdown
• Greater cold resistance – seals are made from an improved material that can withstand temperatures as low as -40 degrees Fahrenheit and help prevent future oil leaks
• Added serviceability – unlike the original equipment PTU, this replacement includes a drain plug to allow for easier routine servicing of the gearbox lubrication to further help prevent future issues

This axle support bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

The components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of an axle of a vehicle or trailer. Check the leaf spring dimensions and other relevant application details to select the right type and size U-bolt kit for your needs.

Product Features:

• Reliable hardware – the components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of a vehicle or trailer axle
• Check fit – carefully review the dimensions of the leaf springs that will be used and other relevant application details to select the right type and size U-bolt kit for your needs
• Durable construction – the components in this kit are engineered from quality materials for reliable performance and long service life
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 INside axle snap ring (next to side gear).

Product Features:

• Inner axle snap ring for Dana Spicer 28, 30, 44 and 50
• Intalls next to side gear

Remanufactured Rear Axle assemblies are completely disassembled and thoroughly cleaned and reassembled using new wear parts: gears, pinions, assembly bolts, bearings, seals, etc. Each unit is micrometer checked for proper gear mesh. Units are assembled, sealed and include backing plates, axle shafts and fluid. Axles are packaged in heavy plastic to protect the unit & aid in returning the core.

Product Features:

• Rear axles are assembled with backing plates & axle shafts, and filled with fluid prior to shipping
• Axles are fully painted & shipped securely in environmentally safe and recyclable containers that are the perfect size for returning your original core
• Our complete Rear axle assemblies mean you just hang brakes, connect suspension & go! Your installation will be simple and trouble free
• Remember to match axle ratio to original. For 4WD rear axle must match front axle ratio

Product Features:

• Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS

C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:

• c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
• .150″ thick

Wheel Lug Stud

AXLE STUD , 58MM X M14-2.0 .

Yukon forged yoke for Ford 8.8″ with a 1350 U/joint size (stronger than billet). 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

• Fits Ford 8.8″
• 30 spline
• 1350 u-joint size
• Outside snap ring design
• 3.625″ snap ring span
• 1.188″ cap diameter
• U-bolt style