Ford Expedition Performance Air Intake Kits

“This sealed intake system utilizes pre-oiled, large 7″” tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Also included is a Magnum SHIELD Pre-filters to protect your performance air filter from water splash or heavy rainstorms. Dual Mandrel-bent Wrinkle-black Powder-coated aluminum intake tubes are designed with an H-pipe to balance intake tube pressure and maximizes airflow and velocity. aFe developed this wrinkle-black powder-coated aluminum heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. An aluminum cover is used to finish off this intake and add a sense of style to your engine bay.”

This K&N NextGen cold air intake system is engineered for your FORD F150/RAPTOR V6-2.7/3.5L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 24.6 percent (driver side) and 33.25 percent (passenger side) to your engine and provides an increase of 27.20 horsepower and 40.29 torque with no tune required. This intake system is paired with a washable, reusable High-Flow lifetime Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

“aFe POWER Track Series Intake Systems, the pinnacle of innovation in open-element intakes. Showcasing a one-piece housing that shields from elements and heat, seamlessly fitting into the engine bay. The highlight of the Track Series is its carbon fiber intake tube, meticulously CAD-designed and refined through dyno-testing. The result is a visually striking, lightweight system that delivers exceptional performance and a captivating induction sound. This 9″” tall 360-degree radial flow air filter features a 5-1/2″” flange and our pre-oiled black Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included massive air filter is surrounded by an open-element XLPE (Cross-linked Polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, and an aggressive air intake sound. The built-in air intake scoop captures cold air directly from the top of the radiator support thanks to its huge opening. Lightweight twill weave carbon fiber with red Kevlar tube directs the filtered air from the massive air filter to the engine. It is computer designed and dyno tested to increase air flow while reducing weight and enhancing the visual appearance of the engine bay. The tube is manufactured out of carbon fiber and red kevlar material (No fiberglass). The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation. Stainless-steel clamps are included for strength, and premium silicone couplers allow for ample flexibility.”

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

“Dual Large 5-Layer Performance Air Filters: This sealed intake system utilizes pre-oiled, large 7″” tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Top Mounted Heat Shield Design: aFe developed this wrinkle-black powder-coated aluminum heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. Large Dual 3″” Intake Tubes: Dual Mandrel-bent Wrinkle-black Powder-coated aluminum intake tubes are designed with an H-pipe to balance intake tube pressure and maximizes airflow and velocity Hassle-Free Installation: All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.”

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

“Dual Large 5-Layer Performance Air Filters: This sealed intake system utilizes pre-oiled, large 7″” tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Top Mounted Heat Shield Design: aFe developed this wrinkle-black powder-coated aluminum heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. Large Dual 3-1/2″” Intake Tubes: Dual Mandrel-bent Wrinkle-black Powder-coated aluminum intake tubes are designed with an torque H-pipe to balance intake tubes. Hassle-Free Installation: All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.”

This cover is constructed of vacuum formed ABS plastic material that bolts right up to the housing. The aFe logo is front and center letting everyone know what brand of intake you have. This cover provides a stealthy yet aggressive style without hurting the performance of the intake. Simple hassle-free installation.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes.

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube And the paper filter, in order to help boost horsepower And mileage. This air intake system offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter And an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten And improve clean air flow to the engine for added throttle response And increased horsepower And torque. Each kit is custom made to fit specific vehicles And is easy to install And requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable And fully backed by the AIRAID No-Hassle limited lifetime warranty. Some AIRAID air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.