Ford EXP Performance and Racing Products

Please Select your Vehicle to See Exact Fit Parts

Essential Ford EXP Performance and Racing Products

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)

Coil; Street Fire; Ford TFI

from

$73.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:
  • Bolt-on Performance
  • Factory replacement coil
See More

Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

Ford 1984-98 Eec-Iv Supercoil

from

$86.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Thermocap Radiator Cap

from

$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:
  • Indicates Coolant Temperature
  • Helps to Prevent Injuries from coolant or steam burns
  • Integrated Coolant Reclamation Valve
  • Improves Underhood Appearance
  • Fahrenheit and centigrade readings
  • Various valve pressures available
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)

Thermocap Radiator Cap

from

$55.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2009)

Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:
  • Designed to allow high flow rates and a consistent flow of oil to your engine
  • Pleated synthetic-blend filtration media removes most harmful contaminants
  • Fast and easy Wrench-Off removal using the welded one-inch hex nut
  • High capacity to withstand the service intervals recommended by vehicle manufacturers
  • Heavy-duty canister for outstanding durability
  • Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
  • Designed to operate with all synthetic, conventional, and blended motor oils
  • 1-Year Limited Warranty
See More

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-2004)

Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:
  • Designed to allow high flow rates and a consistent flow of oil to your engine
  • Pleated synthetic-blend filtration media removes most harmful contaminants
  • Fast and easy Wrench-Off removal using the welded one-inch hex nut
  • High capacity to withstand the service intervals recommended by vehicle manufacturers
  • Heavy-duty canister for outstanding durability
  • Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
  • Designed to operate with all synthetic, conventional, and blended motor oils
  • 1-Year Limited Warranty
See More

Accel – Ford Tfi Modulator 1983-96 (Part No.35368)

Ford Tfi Modulator 1983-96

from

$106.99
This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford Thick Film Ignition systems. 1983 thru 1996.

Product Features:
  • Fits Most Stock And Modified Distributors
  • Dwell Control Circuit
  • Resists False Triggering
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Helping You Find the Right Performance and Racing Products for Your Ford EXP

You love your EXP. So we’ve made it easier than ever to help you find Ford EXP Performance and Racing Products in our online catalog. Our inventory holds 9 aftermarket and OEM Performance and Racing Products for your Ford EXP, ranging from $17.99 to $204.99.

We offer parts from 5 brands trusted to make quality Performance and Racing Products for your Ford EXP. Before you buy, take some time to read through customer reviews. We currently have 1,498 reviews of Ford EXP Performance and Racing Products from previous customers. Some of the top rated parts include Thermocap Radiator Cap with 3.2 stars.

Find your EXP Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford EXP part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your Ford EXP

Our inventory holds Performance and Racing Products for your Ford EXP from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Accel, and MSD Ignition, all of which can keep that Ford happy.
We have Mallory parts available for your Ford EXP in categories like Performance Ignition Products. Some of the top-rated Mallory parts in these categories are:
Unilite Ignition Module
from $95.99
(3)
Unilite Ignition Module
Performance Ignition Parts

Top-Rated K&N Performance and Racing Products

Leading K&N Performance and Racing Products

We carry K&N brand parts for your Ford EXP across several catalog categories, including Performance Oil Filters. Some of our most reviewed K&N parts include:

FAQs for Ford EXP Performance and Racing Products

What are the most purchased Performance and Racing Products for the Ford EXP?

Out of 9 Performance and Racing Products for the Ford EXP, the most popular in our inventory are:
Ford 1984-98 Eec-Iv Supercoil
from $86.99
(28)
Ford 1984-98 Eec-Iv Supercoil
Performance Coils
Coil; Street Fire; Ford TFI
from $73.99
(12)
Coil; Street Fire; Ford TFI
Performance Coils
Ford Tfi Modulator 1983-96
from $106.99
(3)
Ford Tfi Modulator 1983-96
Performance Ignition Modules

What are the top-rated Ford EXP Performance and Racing Products?

Top-rated Performance and Racing Products for your Ford EXP based on customer reviews/ratings are:
Thermocap Radiator Cap
from $53.99
(17)
Thermocap Radiator Cap
“Worth the money if only for the looks. And will tell you the temp outside”