Ford Excursion Performance and Racing Products
Top Ford Excursion Performance and Racing Products Categories
We carry over 27 Performance and Racing Products in inventory for the Ford Excursion. If you’re looking for aftermarket Performance and Racing Products for your Ford Excursion, check out all these categories:
Essential Ford Excursion Performance and Racing Products
Dynomax – Super Turbo Single System (Part No.19328)
from
$368.99
DynoMax Performance Exhaust is a leading performance exhaust brand built on over 25 years of market leadership. Each and every DynoMax product is backed by engineers who know what you want and expect out of a performance exhaust product… and who exceed your expectations every time.
See More
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.57-2524-2)
from
$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9921)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 17in long, Non-Reversible, Moderate Sound (Part No.53058)
from
$185.99
The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound (Part No.43043)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)
from
$176.99
Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.
Product Features:
See More
Product Features:
- Easily install two DIS-4 Ignitions on late model Ford Engines
- Easy Connections w/No Splicing Or Cutting Into Factory Wiring
- Wiring the system will take only an hour
- Multiple direct plug in connectors
- Wiring the system will only take and hour
Hays – Flywheels (Part No.12-071)
from
$163.99
Flywheels
Motive Gear – Differential Ring and Pinion (Part No.F10.5-355PK)
SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)
from
$456.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.
Product Features:
See More
Product Features:
- Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Full color LCD display
- High-speed data logging/monitoring
- Dual analog inputs
- Most popular vehicles supported
- Installs quickly and easily
- Easy restoration back to stock
- User adjustable vehicle parameters
- USB Interface cable included
- Product might not be available in all states due to local laws.
Bully Dog – Diesel Performance Tuner with Gauges & Customizable Tuning (Part No.40420)
from
$469.99
The GT Gas and Diesel tuners unlock more horsepower and torque to meet the unique demands you put on your vehicle. With preloaded tuning, customizable gauges to track performance, and a wide variety of hauling and off-roading features, you’ll have plenty of power to take on tough jobs or improved fuel economy for long highway hauls.
Product Features:
See More
Product Features:
- Track critical performance data in real-time on easy to navigate virtual gauges
- Select between multiple street-tested, dyno-proven tunes for economy, towing or performance.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease
- Manage tire size, gear ratio, speed limiter, speedometer calibrations, shift points, and more. Offering shift-on-the-fly tuning and better control of defueling and regeneration.
- Product might not be available in all states due to local laws.
Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)
from
$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.
Product Features:
See More
Product Features:
- HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
- MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
- CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
- Reads and Erases Diagnostic Trouble Codes
- Display Over 15 Vehicle Parameters
- Installation Is Easy-10-20 Minutes
- Free Internet Updates And Upgrades
- 30 Day Money Back Guarantee
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1343)
from
$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Upper Intake Manifold (Plenum) Gasket Set: 2 Piece Set (Part No.1236)
from
$40.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- 5.4L Cobra R; Upper intake
- Not intended for use in emission controlled vehicles.
Hypertech – Max Energy Power Programmer – Ford (Part No.42002)
from
$399.99
Max Energy Tuning extracts every bit of energy possible out of every molecule of fuel giving you more miles at part-throttle and more power at wide-open throttle. In order to increase engine efficiency, horsepower and torque, our engineers first optimize the spark and fuel curves point by point over the entire rpm band. With the additional power and optimized transmission functions, drivers use less fuel to accelerate and maintain cruising speeds without the torque converter un-locking and transmission down-shifting to a lower gear. The results are maximum power and fuel mileage
Product Features:
See More
Product Features:
- Adjustable Rev Limiter/Speed Limiter
- Back-To-Stock Tuning
- Tire Size/Gear Ratio Change
- Adjustable Shift Firmness/Points
- Cooling Fan On/Off Temperatures
- Adjustable Shift Firmness/Points
- Speedometer/Odometer Correction For Multiple Tire Sizes
- Reads/Displays/Clears Diagnostic Trouble Codes
- Internet Updateable
- Product might not be available in all states due to local laws.
MSD Ignition – Coil; Ford 4.6/5.4L 2-Valve 98-14 Single (Part No.8242)
from
$54.39
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.
Product Features:
See More
Product Features:
- Fits 1999-2004 4.6L And 5.4L SOHC 2V
- Improved Spark Energy And Voltage Output
- Patented Winding Design and Materials
- Direct Bolt-In to Factory Connectors
- CARB approved legal for use in all states
Spectre – Spectre Replacement Air Filter (Part No.HPR8039)
from
$49.99
This Spectre OEM replacement air filter is an easy to install performance option for the stock cone shaped air filter in multiple Ford applications. With its HPR (High Performance Replacement) synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock oval and egg shaped Ford air filter housings, this air filter includes sealing gaskets at the base of the air filter to insure a proper seal for great engine protection.
Product Features:
See More
Product Features:
- HPR OE Replacement Air Filter
- High flow replacement filter designed to fit perfectly in your stock air box
- Engineered for increased flow and greater performance
- Fits multiple Ford applications
- Factory pre-oiled and ready to use
- Easy to install with no special tools or skills required
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2287)
from
$64.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
Spectre – Spectre Replacement Air Filter (Part No.HPR9687)
from
$33.99
This Spectre OEM replacement air filter is an easy to install performance option for the stock panel shaped air filter in multiple Ford and Lincoln truck applications. With its performance synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in many stock Ford & Lincoln truck air boxes, this air filter includes sealing designed around the stock air box to insure a proper seal for great engine protection.
Product Features:
See More
Product Features:
- HPR OE Replacement Air Filter
- High flow replacement filter designed to fit perfectly in your stock air box
- Engineered for increased flow and greater performance
- Fits multiple Ford F150, F250, F350 & Lincoln Mark LT applications
- Factory pre-oiled and ready to use
- Easy to install with no special tools or skills required
Rancho – RS5000 Steering Damper (Part No.RS5406)
from
$78.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
Rancho – Steering Damper Bracket (Part No.RS5542)
from
$85.99
Designed to mount a dual steering stabilizer to a Ford® F-250, F-350 or Excursion without any modifications, the Rancho® dual steering stabilizer bracket is made of high-strength, low-alloy steel and includes the mounting hardware for easy installation.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for Ford F-250 and F-350 heavy-duty trucks and Ford Excursion SUVs with Rancho RS5000® steering stabilizers
- ENHANCES PERFORMANCE — Protects dual steering stabilizer from contacting other components at full jounce travel ideal for off-roading, towing/hauling and street performance applications
- RESISTS CORROSION — Durable black powder-coat finish resists rust and corrosion
- ENGINEERED TO LAST — Features 0.25-in. high-strength, low-alloy steel construction for long life
- EASY TO INSTALL — Bolts directly to factory steering linkage with included mounting hardware, no modifications needed
- PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
Ford Excursion Performance and Racing Products Categories
Helping You Find the Right Performance and Racing Products for Your Ford Excursion
You love your Excursion. So we’ve made it easier than ever to help you find Ford Excursion Performance and Racing Products in our online catalog. Our inventory holds 27 aftermarket and OEM Performance and Racing Products for your Ford Excursion, ranging from $33.99 to $474.99.
We offer parts from 14 brands trusted to make quality Performance and Racing Products for your Ford Excursion. Before you buy, take some time to read through customer reviews. We currently have 186 reviews of Ford Excursion Performance and Racing Products from previous customers. Some of the top rated parts include 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics with 3.6 stars and Diesel Performance Tuner with Gauges & Customizable Tuning with 2.0 stars.
Find your Excursion Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Excursion part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Performance and Racing Products Brands for Your Ford Excursion
Our inventory holds Performance and Racing Products for your Ford Excursion from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like Spectre, K&N, and Flowmaster Inc., all of which can keep that Ford happy.
We have K&N parts available for your Ford Excursion in categories like Performance Air Intake Kits. Some of the top-rated K&N parts in these categories are:
from
$349.99
(16)
Cold Air Intake: Adds Up To 16 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
from
$349.99
(7)
Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
from
$349.99
(13)
Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
Top-Rated K&N Performance and Racing Products
Leading K&N Performance and Racing Products
We carry K&N brand parts for your Ford Excursion across several catalog categories, including Performance Air Filters. Some of our most reviewed K&N parts include:
from
$64.99
(33)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
Performance Air Filters
FAQs for Ford Excursion Performance and Racing Products
What are the most purchased Performance and Racing Products for the Ford Excursion?
Out of 27 Performance and Racing Products for the Ford Excursion, the most popular in our inventory are:
from
$99.99
(2)
40 Series Muffler, 3in Offset Inlet 3in Offset Outlet, 13in long, Non-Reversible, Aggressive Sound
Performance Exhaust Mufflers
What are the top-rated Ford Excursion Performance and Racing Products?
Top-rated Performance and Racing Products for your Ford Excursion based on customer reviews/ratings are:
from
$469.99
(9)
50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics
“Installed a CAI and exhaust before I bought the Bully Dog. This product made me able to get the full use of the mods.”
from
$469.99
(3)
Diesel Performance Tuner with Gauges & Customizable Tuning
“2003 Dodge, 5.9 cummins, quad cab, long bed, 4X4, automatic, 4 inch exhaust. I drive 100 mile a day for work, & tow a 27 foot 5th wheel camper for fam”
from
$456.99
(1)
Preloaded Performance Programmer for Increased Horsepower & Torque
“I love this tuner. My car has felt like it really woke up when I installed some of the preset tunes in it. It amazes me that they have preset tunes fo”
