Ford Elite Air Intakes
Top Ford Elite Air Intakes Categories
We carry over 58 Air Intakes in inventory for the Ford Elite. If you’re looking for aftermarket Air Intakes for your Ford Elite, check out all these categories:
Essential Ford Elite Air Intakes
Edelbrock – Carburetor Throttle Cable Bracket #1495 For Ford 429/460 Big-Block (Part No.1495)
from
$24.99Product Features:
- Repositions Stock Throttle Cable Bracket
- Use With PN[1483]
- Use w/Stock Throttle Cable Bracket
- For Fords w/Cable Activated Throttles
- Fords w/Automatic Transmission Kickdown Rod
Edelbrock – Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair) (Part No.12457)
from
$13.99
The Edelbrock 94 #12457 Carburetor Jets .057″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.
Product Features:
See More
Product Features:
- 57 Maximum Jet Size
- 0.056 in. Orifice Diameter
- 1/14-32 in. Thread Size
- Standard Main Jet Type
- Set of 2
United Carb – Remanufactured Carburetor 2 Barrel (Part No.7-7574)
from
$254.99
Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.
See More
Edelbrock – Throttle Lever #1483 For Ford 1968 And Later, Gold Iridited Finish (Part No.1483)
from
$38.99
Product Features:
See More
- Converts Throttle Lever on Carb for Proper Use
- For Edelbrock Performer Series Carburetors Only
- Also Accepts Cruise Control
- Use with Appropriate Throttle Cable Plate
Edelbrock – Pro-Flo 1000 Series Chrome Air Cleaner with Foam Element with 5-1/8" Air Horn (Part No.1002)
from
$31.99Product Features:
- Super Flow; Good Filtration
- Urethane Foam Element
- Strong Metal Inner Frame
- Performance Benefits
- Cleans With Soap and Water
- Low Maintenance Cost
- Simple To Install
- Nicely Finished; Low Profile
Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1796)
from
$44.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More
Carquest – Carburetor Choke Pull-Off (Part No.779-6106)
from
$25.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
- Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
- Undergoes extensive testing and validation for proper performance and peak reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
Sealed Power – Valley Pan Gasket Set (Part No.260-4005)
from
$33.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Edelbrock – Standard Flow Carburetor Power Valve #12665 Single Stage 6.5in Hg (Part No.12665)
from
$16.99
Product Features:
See More
- The Edelbrock #12665 Single Stage 6.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
- During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
Felpro – CARBURETOR MOUNTING GASKET SET (Part No.ES 70582)
from
$19.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Carburetor Mounting Gasket (Part No.60291)
from
$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)
from
$20.99
The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23
Product Features:
See More
Product Features:
- Center Hung Floats
- 0.11 in. Needle Diameter
- Viton® Needle Material
- Sold Individually
- Non-Adjustable Type
Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)
from
$18.99
Product Features:
See More
- The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
- Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.
Edelbrock – RPM Air-Gap Dual-Quad Small Block Ford 351W Intake Manifold (Part No.7585)
from
$566.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.
Product Features:
See More
Product Features:
- Based on C26 Low Profile with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- 1.625 in. Taller Than Low-Profile PN[5425]
- Also Available In EnduraShine Finish PN[75254]
- Also Available As Complete Kit PN[2025/20254]
- Best When Matched with Edelbrock 500cfm Carburetor
- Use Fuel Line Kit PN[8088/8091]
- Use Progressive Throttle Linkage Kit PN[7094]
Weiand – High-Rise Dual Plane Intake Manifold for Maximum Torque (Part No.8012)
from
$359.99Product Features:
- High Rise/Dual Plane Design For Maximum Torque
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking
- More Consistent Castings
Edelbrock – Carburetor Gasket Kit #12380 Fits 4150 And 4160 Carburetors (Part No.12380)
from
$17.99
Product Features:
See More
- The Edelbrock #12380 Metering Block gasket is made of black nitrile material and will ensure a leak-free seal from your Carb to the metering block.
- The Edelbrock #12380 Metering Block gasket will fit 4150 &4160 Carburetors.
- These will not work with accelerator pump transfer tubes.
Edelbrock – Carburetor Gasket Kit #12371 Fits 4160 Carburetors (Part No.12371)
from
$19.99
The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.
Product Features:
See More
Product Features:
- Nitrile Rubber Material
- Metering Block Type
- Set of 4
- Fits Holley® 4160 Carburetors
- Made In The USA
Felpro – Air Cleaner Mounting Gasket (Part No.60038)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific, providing unsurpassed quality for a seal you can trust
- Validated for fit, form, and function
- Engineered for the sealing repair environment
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)
from
$31.99
Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Product Features:
See More
Product Features:
- Rubber Material
- For Holley®, Barry Grant, And Demon Gasoline Carburetors
- No Hardware Included
- 50cc Volume
- Made iIn The USA
Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)
from
$12.99
Product Features:
See More
- The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
- Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
Edelbrock – Carb Needle & Seat Hardware Kit #12600 FOR Holley Carb w/ Center Hung Fuel Bowl (Part No.12600)
from
$13.99
The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45
Product Features:
See More
Product Features:
- Fits Holley® Carburetors With Center Hung Fuel Bowl
- Includes Adjusting Nut
- Includes Locking Screw
- Includes O-Ring
- Includes Washers
Edelbrock – Fuel Bowl Inverted Flare Fuel Inlet Fitting #12415 (Part No.12415)
from
$20.99
Edelbrock part #12415 Fuel Bowl Inverted Flare Fitting is a 3/8″ inverted flare fuel inlet fitting. The fitting is designed for use with Holley 2300, 4150, 4150HP and 4160 (center hung floats only), 4500, 4500HP and Rochester Quadrajet applications up to
Product Features:
See More
Product Features:
- Brass Material
- 3/8 in. Single Barb
- 7/8-20 in. Male End
- 5/8-18 in. Female Flare
- With 3/8 in. Tube
Ford Elite Air Intakes Categories
Helping You Find the Right Air Intakes for Your Ford Elite
You love your Elite. So we’ve made it easier than ever to help you find Ford Elite Air Intakes in our online catalog. Our inventory holds 58 aftermarket and OEM Air Intakes for your Ford Elite, ranging from $3.29 to $2,024.99.
We offer parts from 9 brands trusted to make quality Air Intakes for your Ford Elite. Before you buy, take some time to read through customer reviews. We currently have 363 reviews of Ford Elite Air Intakes from previous customers. Some of the top rated parts include Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) with 3.8 stars and Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors with 3.0 stars.
Find your Elite Air Intakes here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Elite part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Air Intakes Brands for Your Ford Elite
Our inventory holds Air Intakes for your Ford Elite from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like FELPRO, Edelbrock, and Holley, all of which can keep that Ford happy.
We have Weiand parts available for your Ford Elite in categories like Intake Manifold Parts. Some of the top-rated Weiand parts in these categories are:
Top-Rated Edelbrock Air Intakes
Leading Edelbrock Air Intakes
We carry Edelbrock brand parts for your Ford Elite across several catalog categories, including Air Cleaner Parts. Some of our most reviewed Edelbrock parts include:
from
$43.99
(19)
Pro-Flo Chrome 14" Round Air Cleaner with 3" Paper Element (Deep Flange)
Air Cleaner Assemblies
from
$31.99
(10)
Pro-Flo 1000 Series Chrome Air Cleaner with Foam Element with 5-1/8" Air Horn
Air Cleaner Assemblies
from
$47.99
(9)
Pro-Flo Black 14" Round Air Cleaner with 3" Paper Element (Deep Flange)
Air Cleaner Assemblies
FAQs for Ford Elite Air Intakes
What are the most purchased Air Intakes for the Ford Elite?
Out of 58 Air Intakes for the Ford Elite, the most popular in our inventory are:
from
$43.99
This product is not rated
Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors
Carburetor and Injector Seal Kits
What are the top-rated Ford Elite Air Intakes?
Top-rated Air Intakes for your Ford Elite based on customer reviews/ratings are:
from
$397.99
(5)
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
“easy to install all the gaskets and parts came with it”
from
$14.99
(4)
Carburetor Gasket Kit #12382 Fits 2300, 4150, 4160, 4175, And 4500 Carburetors
“Was the wrong slip joint. Catalog was very confusing to use and misleading. Had to locate through another website.”
