Name: Wheel Bearing: Direct Fit, 1 Piece
Brand: National
SKU: 510063
Price: 95.99 USD
Rating: 4.0 (21 reviews)

from

$95.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST- Advanced heat treatment process for strength, and a stainless steel flinger protects the seal and helps extend the bearing life.
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$246.99

Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$281.85

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
Special bearing seals to help keep out contaminants, the number one cause of bearing failure
Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
Integral bearing races specifically designed to each application, no one-size-fits-all solution
Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
Original equipment specifications minimize any possibility of the hub cracking
Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
Tapered roller bearings for high load rates when specified

from

$79.99

WHEEL BEARING

from

$189.99

WJB Automotive wheel hub assemblies are made with high precision through state-of-the-art technology and manufactured with strict quality-control criteria. Every wheel hub assembly is specifically designed to fit the designated applications and may be used as a direct replacement for the original part. Each part is engineered using OE data and measurements to ensure fitment, performance, and longevity.

Product Features:

Fitment and function are ensured by precision machining, rigorous testing, and meticulous inspection of material and components.
WJB Automotive wheel hub assemblies are designed to meet stringent fatigue requirements in order to reduce premature failure.
Reinforced seal design material allows for optimal performance in harsh environments.
WJB Automotive wheel hub assemblies undergo heat treatment and cold-forming processes that harden the surface ensuring high-temperature resistance and durability.
Where applicable, pre-installed speed sensors will automatically sync to the vehicle’s anti-lock braking system upon successful installation and provide accurate speed-reading data.
Brand may vary by location

from

$189.99

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:

Engineered for OE fit, form and function
Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
High-quality steel and surface treatments for proper fit and endurance
Roll-form bearing design applies exact preload for increased durability (where applicable)
Bearings and seals are engineered to the requirements of each specific vehicle application
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

from

$669.99

Backed by superior materials and rigorous testing, MOOG complete knuckle assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPLETE SOLUTION — Pre-assembled for convenience and includes premium parts like a MOOG knuckle, MOOG wheel hub with studs, bearing, axle nut, backing plate and premium ball joint (where applicable) for a complete solution
EASY TO INSTALL — Innovative bolt-on, pre-assembled solution designed to make troublesome bearing replacement easier and eliminate the need for special tools or a press
CORROSION PROTECTION — e-Coated backing plate and knuckle provides long-lasting corrosion resistance
STRONG AND DURABLE — Engineered with high-quality materials to provide long life and dependability
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$669.99

Backed by superior materials and rigorous testing, MOOG complete knuckle assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPLETE SOLUTION — Pre-assembled for convenience and includes premium parts like a MOOG knuckle, MOOG wheel hub with studs, bearing, axle nut, backing plate and premium ball joint (where applicable) for a complete solution
EASY TO INSTALL — Innovative bolt-on, pre-assembled solution designed to make troublesome bearing replacement easier and eliminate the need for special tools or a press
CORROSION PROTECTION — e-Coated backing plate and knuckle provides long-lasting corrosion resistance
STRONG AND DURABLE — Engineered with high-quality materials to provide long life and dependability
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$158.99

DRIVEWORKS Wheel Hub assemblies are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hub assemblies are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hub assemblies. DRIVEWORKS Wheel Hub assemblies come complete with wheel studs, hub and bearings where applicable. ABS Wheel Sensors are also provided where applicable.

Product Features:

Constructed from quality materials for extended durability
Integral raceway provides proper clearance between the ball and bearing riding surfaces
Precision-matched components deliver smooth and quiet operation
Manufactured to strict engineering quality standards
Quality ABS leads are 100% tested to ensure longevity and performance (where applicable)
Go through a vacuum vulcanization process to enhance the structural integrity of the seal and rubber components (where applicable)
Brand may vary by location

from

$139.60

Wheel Hub Assembly

from

$231.99

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:

Engineered for OE fit, form and function
Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
High-quality steel and surface treatments for proper fit and endurance
Roll-form bearing design applies exact preload for increased durability (where applicable)
Bearings and seals are engineered to the requirements of each specific vehicle application
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

from

$217.99

Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$145.99

Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RELIABLE PERFORMANCE — Precise roll-form design ensures consistent and optimal factory-installed preload to minimize excessive noise and wear
EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$62.33

FEQ manufactures OE quality wheel hub assemblies that provide heavy duty performance, improved fuel economy and reduced weight. FEQ wheel bearing hubs are maintenance free – fully lubricated and sealed for life.

Product Features:

Integrated sensors and electronics for reliable function
Factory sealed assembly eliminates contamination
No need for pre-load adjustment at assembly
Compact and lightweight
Minimizes axial space requirements

from

$205.31

Wheel Hub Assembly

from

$234.16

FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle. The FAG wheel hub assembly is a highly integrated unit with flanges for the brake disc, wheel and knuckle, which allow the highest possible running accuracy. Integrated speed encoders generate the signals required for steering the vehicle (ABS/ESP). The bearing clamping force is applied and controlled by FAG via an orbital formed shoulder.

Product Features:

Original Equipment Quality
Maintenance free
Premium modified bearing steel
Lubricated with specially developed greases
Optimized sealing systems

from

$155.60

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
Special bearing seals to help keep out contaminants, the number one cause of bearing failure
Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
Integral bearing races specifically designed to each application, no one-size-fits-all solution
Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
Original equipment specifications minimize any possibility of the hub cracking
Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
Tapered roller bearings for high load rates when specified

from

$52.07

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
Special bearing seals to help keep out contaminants, the number one cause of bearing failure
Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
Integral bearing races specifically designed to each application, no one-size-fits-all solution
Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
Original equipment specifications minimize any possibility of the hub cracking
Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
Tapered roller bearings for high load rates when specified