Ford E-250 Engine Cold Air Intakes
Your Ford E-250 will be happy to know that the search for the right Engine Cold Air Intakes you’ve been looking for is over! Advance Auto Parts has 1 different Engine Cold Air Intakes for your vehicle, ready for shipping or in-store pick up. The best part is, our Ford E-250 Engine Cold Air Intakes start from as little as $369.99.
When it comes to your Ford E-250, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Engine Cold Air Intakes brands so you can shop with complete confidence. We’re sure you will get the right product to keep that E-250 running for a long time.
We even have reviews of our OEM and aftermarket Engine Cold Air Intakes products to help you buy with confidence. Hear from other customers via the 180 reviews on parts for your Ford E-250.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Engine Cold Air Intakes for your E-250, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Compare 25 Ford Engine Cold Air Intakes
K&N – K&N Cold Air Intake: Adds Up To 19 Horsepower, With Washable Air Filter, 63-2593 (Part No.63-2593)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
See More
K&N – K&N Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance, RU-4960XD (Part No.RU-4960XD)
from
$68.99
K&N’s Universal Air Filters are designed and manufactured for a wide variety of applications including racing vehicles, radio-controlled cars, generators, snowmobiles, tractors, and other applications. Regardless of the angle or offset diameter of the air intake, there is probably a K&N Universal air filter for your equipment. All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration and allow for secure attachment and can also be stretched for up to 1/16 of an inch (1.5mm) to fit in-between sizes. K&N universal air filters are washable and reusable.
See More
K&N – K&N Cold Air Intake: Adds Up To 15 Horsepower, With Washable Air Filter, 57-2565 (Part No.57-2565)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
See More
K&N – K&N Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter, 57-2550 (Part No.57-2550)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
K&N – K&N Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter, 63-2588 (Part No.63-2588)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
Spectre – Spectre Air Intake Kit, 9929 (Part No.9929)
from
$210.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
See More
K&N – K&N Cold Air Intake: Adds Up To 3 Horsepower, With Washable Air Filter, 57-2527 (Part No.57-2527)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
K&N – K&N Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter, 57-2544 (Part No.57-2544)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
K&N – K&N Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter, 71-3527 (Part No.71-3527)
from
$419.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
K&N – K&N Cold Air Intake: Adds Up To 5 Horsepower, With Washable Air Filter, 77-2529KP (Part No.77-2529KP)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
See More
K&N – K&N Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter, 69-3524TP (Part No.69-3524TP)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
See More
K&N – K&N Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter, 77-2570KTK (Part No.77-2570KTK)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
K&N – K&N Cold Air Intake: Adds Up To 30 Horsepower, With Washable Air Filter, 57-2545 (Part No.57-2545)
from
$367.99
The K&N 57-2545 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Ford Mustang SVT Cobra models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-2545 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the air filter and into the engine’s throttle body for a guaranteed power gain. The air intake system accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job.
See More
K&N – K&N Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter, 57-2557 (Part No.57-2557)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
K&N – K&N Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter, 57-2585 (Part No.57-2585)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
K&N – K&N Cold Air Intake: Adds Up To 16 Horsepower, With Washable Air Filter, 57-2562 (Part No.57-2562)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
K&N – K&N Cold Air Intake: Adds Up To 6 Horsepower, With Washable Air Filter, 69-3511TR (Part No.69-3511TR)
from
$367.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
K&N – K&N Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter, 57-2553 (Part No.57-2553)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
K&N – K&N Cold Air Intake: Adds Up To 12 Horsepower, With Washable Air Filter, 57-2523-2 (Part No.57-2523-2)
from
$367.99
The K&N 57-2523-2 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Ford Mustang models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-2523-2 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points and accommodates the factory mass air sensor. The installation requires commonly available tools to do the job.
See More
K&N – K&N Cold Air Intake: Adds Up To 57 Horsepower, With Washable Air Filter, 57-2571 (Part No.57-2571)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
See More
K&N – K&N Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter, 57-2541 (Part No.57-2541)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
K&N – K&N Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter, 77-2588KTK (Part No.77-2588KTK)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
See More
K&N – K&N Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter, 77-2575KS (Part No.77-2575KS)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
See More
K&N – K&N Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter, 57-2542 (Part No.57-2542)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
See More
K&N – K&N Cold Air Intake: Adds Up To 6 Horsepower, With Washable Air Filter, 57-2535 (Part No.57-2535)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
See More
Find Your Ford E-250 Engine Cold Air Intakes by Year
People also search Advance Auto for these popular years of Ford E-250 parts:
