Ford E-150 Econoline By-Pass Hose

By-Pass Hose for a Ford E-150 Econoline

Use the fitment form at the top of the page to select your exact year and engine type for your Ford E-150 Econoline.

• 

  Dayco - 90 Degree Coolant Hose (Part No. 80400)

  Description

  Dayco 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco's Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.
  
  Product Features:

  • Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2021-08-14

    5

    5

    Must get

    Must get

    Submitted 2021-08-14

    By Brian

    From Undisclosed

    Fixed my leak cheaper then oem

    Bottom Line NULL

    Fixed my leak cheaper then oem

    By Brian from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-07-01

    5

    5

    As it should work

    As it should work

    Submitted 2021-07-01

    By Keith

    From Undisclosed

    Good

    Bottom Line NULL

    Good

    By Keith from Undisclosed

    BOTTOM LINE NULL

  • 4

    4

    2021-01-26

    4

    4

    Would buy again

    Would buy again

    Submitted 2021-01-26

    By Noah

    From Undisclosed

    Was the right angle . fit good. plenty extra hose for multi fit.

    Bottom Line NULL

    Was the right angle . fit good. plenty extra hose for multi fit.

    By Noah from Undisclosed

    BOTTOM LINE NULL

  from $11.99

  View Product
• 

  Dayco - Curved Radiator Hose (Part No. A70646)

  Description

  Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.
  
  Product Features:

  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 4

    4

    2021-12-27

    4

    4

    I would buy this product again

    I would buy this product again

    Submitted 2021-12-27

    By The Rockman

    From Landisburg, Pa.

    Hose is good- but had to trim approx. 1 1/2" off one end to make it fit. No biggy. Just a sharp knife.

    Bottom Line recommended

    Hose is good- but had to trim approx. 1 1/2" off one end to make it fit. No biggy. Just a sharp knife.

    By The Rockman from Landisburg, Pa.

    BOTTOM LINE recommended

  • 5

    5

    2021-08-17

    5

    5

    Yes I will buy this product again

    Yes I will buy this product again

    Submitted 2021-08-17

    By Darnell

    From Undisclosed

    Replaced this hose when replacing water pump. It fit good

    Bottom Line NULL

    Replaced this hose when replacing water pump. It fit good

    By Darnell from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2021-03-03

    5

    5

    Perfect fit for my 1990 F150 302 EFI AOD

    Perfect fit for my 1990 F150 302 EFI AOD

    Submitted 2021-03-03

    By mtnbikr

    From denver co

    Little pricey, I don't know... Sure is nice that my local AA had it in stock & was exactly what the 5Liter 1990 F-150 required.

    Bottom Line recommended

    Little pricey, I don't know... Sure is nice that my local AA had it in stock & was exactly what the 5Liter 1990 F-150 required.

    By mtnbikr from denver co

    BOTTOM LINE recommended

  from $20.99

  View Product
• 

  Dayco - Curved Radiator Hose (Part No. A70799)

  Description

  Dayco Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.
  
  Product Features:

  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges

  from $11.99

  View Product
• 

  Dayco - Molded Heater Hose (Part No. 87646)

  Description

  Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.
  
  Product Features:

  • Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
  • This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
  • Highly resistant to electro-chemical degradation and premature stress cracking of the tube
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

  from $9.99

  View Product
• 

  Motorcraft - Bypass Hose (Part No. G2020673596MTR)

  from $27.52

  View Product
• 

  Motorcraft - Bypass Hose (Part No. G2020673613MTR)

  from $6.29

  View Product