Ford Customline Performance and Racing Products

Essential Ford Customline Performance and Racing Products

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

Super Stock Replacement Coil for Improved Performance, Starting, and Power

from

$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:
  • 42000 Volts
  • Effective To 6500 RPM
  • Quicker Starting
  • Improved Throttle Response
  • Higher RPM Power
  • Can Finished In Yellow
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)

Ultra Seal: Harmonic Balancer Bolt/Washer Kit

from

$38.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.

Product Features:
  • Heat treated black oxide coated Grade 8 alloy steel
  • Thick parallel ground washer provides more accurate, uniform torque
  • Hex Prevents Socket Slippage
  • Accurate And Uniform Torque
  • Black Plated Finish
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

MSD Ignition – Distributor; Flathead Ford; Ready-to-Run; 49-53 (Part No.8573)

Distributor; Flathead Ford; Ready-to-Run; 49-53

from

$757.99
Early flathead racers and cruisers alike will be excited to see these front mount flathead distributors! These distributors are built around a CNC-machined billet aluminum housing for precise tolerances. The distributor is topped off with our own crab cap with spark plug style terminals for improved wire connections. Just under the cap and Rynite race rotor is MSD’s adjustable mechanical advance. This assembly features chromoly construction with Tig-welded weight pins to secure the precision fine blanked weights. MSD supplies different advance springs and stop bushings so you can dial-in an advance curve to meet your flathead’s specs. Just under the advance is MSD’s race-proven magnetic pick-up. This pickup, combined with a reluctor, produces accurate trigger signals that are responsible for firing the MSD Ignition control. Bring your flathead up to date with MSD Performance.

Product Features:
  • Designed for 1949-1953 8-BA Ford Flathead engines
  • No CARB Exemption Order Number
  • Does not require an MSD Ignition Control
  • Accepts Cap-A-Dapts
  • Supplied w/HEI style dist. cap/rotor/gear/roll pin/setup spacer
  • Nylon pads ensure smooth operation of the advance weights
  • Advance weight pins are staked and tig welded to the plate
  • Mech. advance assem. can be locked out for crank trigger systems
See More

MSD Ignition – Distributor; Ford Y Block; Ready-to-Run (Part No.8383)

Distributor; Ford Y Block; Ready-to-Run

from

$774.99
MSD is excited to offer two ready-to-run distributors for two classic Ford engines. These distributors are the answer to weak breaker points or rebuilt aftermarket models. Inside the billet housing there is a high-output ignition module. When the maintenance-free magnetic pick-up signals the module to fire, up to 7.5 amps is sent to the coil where a powerful spark is created. This improved spark output results in quick starts, snappy throttle response and terrific drivability. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the ready-to-run distributors is their simple installation. All you need to do is connect three wires and you’ll be cruising.

Product Features:
  • Now includes built-in Rev Limiter
  • No CARB Exemption Order Number
  • Does not require an MSD Ignition Control
  • Built-in module produces a 7.5 amp single spark through high rpm
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Housing Is 5/8 in. Smaller In Diameter Than Stock Ford Distr.
See More

Edelbrock – Flathead 1949-53 Generator Bracket waterneck kit Satin (Part No.1146)

Flathead 1949-53 Generator Bracket waterneck kit Satin

from

$164.99
Edelbrock part #1146 is a Generator Bracket kit for our 1109, ’49-53 Ford Flathead Triple Deuce Intake Manifold. It is for those using the manifold in conjunction with a stock style generator. The purpose of kit is to remedy the interference between the g

Product Features:
  • Offset Bracket
  • Longer Fan Belt Is Required
  • Includes 1.25 in. Water Neck
  • Natural Finish
  • Made In The USA
See More

Edelbrock – Sure Seat Valve Springs for Ford 289-302 (Part No.5822)

Sure Seat Valve Springs for Ford 289-302

from

$54.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Ford 289-302 & 351W V8 (Part No.5896)

Complete Sure Seat Valve Spring Kit for Ford 289-302 & 351W V8

from

$125.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • Complete Kit: Includes Retainers And Locks
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Includes Superior Quality Steel Retainers
  • Includes 7 deg. Heat-Treated Valve Stem Locks
  • Retainers and Locks Black Oxide Coated
  • Dyno Tested And Street Proven
  • Great Match to Edelbrock Camshaft Kit
See More

Mr. Gasket – Dust Cap (Part No.2485)

Dust Cap

from

$12.09
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Product Features:
  • Chrome Plated Steel
  • Set of 2 Caps
  • Easy Installation
  • 2 Per Set
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Edelbrock – Polished Cylinder Heads for 1949-53 Ford/Merc Flatheads (Part No.11151)

Polished Cylinder Heads for 1949-53 Ford/Merc Flatheads

from

$1059.99
The Edelbrock #11151 Ford Flatheads feature the original Edelbrock script logo design for Fords and Mercurys, and are casted at the Edelbrock Foundry in the USA of T-6 tempered A356 aluminum. The Edelbrock #1115 heads are rugged, ribbed internally and ext
See More

Edelbrock – Flathead Ford Cylinder Head With Script Logo (Part No.1115)

Flathead Ford Cylinder Head With Script Logo

from

$858.99
Product Features:
  • Made of A356 aluminum T-6 tempered cylinder head
  • Cylinder head is made of aluminum with a natural finish
  • Large water capacity and excellent breathing characteristics
  • Compression ratio increase is approximately 3/10 of a percent with each 1/8 in. stroke
  • Compression ratio is 8.0:1 on blocks with a 3/16 in. base relief
See More

Edelbrock – Ford Flathead 4-Barrel Intake Manifold for 1949-53 Ford Flathead, Satin Finish (Part No.1107)

Ford Flathead 4-Barrel Intake Manifold for 1949-53 Ford Flathead, Satin Finish

from

$587.99
Product Features:
  • Flathead 4-Barrel Manifold
  • Dual Plane Type-4150 Style Flange
  • 4.06 in. Front Height, 5.06 in. Center Height, 6.06 in. Rear Height
  • Satin Finish
  • Made In The USA
See More

Helping You Find the Right Performance and Racing Products for Your Ford Customline

You love your Customline. So we’ve made it easier than ever to help you find Ford Customline Performance and Racing Products in our online catalog. Our inventory holds 16 aftermarket and OEM Performance and Racing Products for your Ford Customline, ranging from $12.09 to $1,059.99.

We offer parts from 5 brands trusted to make quality Performance and Racing Products for your Ford Customline. Before you buy, take some time to read through customer reviews. We currently have 159 reviews of Ford Customline Performance and Racing Products from previous customers.

Find your Customline Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Customline part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your Ford Customline

Our inventory holds Performance and Racing Products for your Ford Customline from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like Accel, Mr. Gasket, and Mallory, all of which can keep that Ford happy.
We have Mallory parts available for your Ford Customline in categories like Performance Ignition Products. Some of the top-rated Mallory parts in these categories are:
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
Performance Ignition Parts

FAQs for Ford Customline Performance and Racing Products

What are the most purchased Performance and Racing Products for the Ford Customline?

Out of 16 Performance and Racing Products for the Ford Customline, the most popular in our inventory are:
Thermocap Radiator Cap
from $48.09
This product is not rated
Thermocap Radiator Cap
Performance Radiator Caps
Dust Cap
from $12.09
This product is not rated
Dust Cap
Performance Wheel Bearing Dust Caps
Ultra Seal: Harmonic Balancer Bolt/Washer Kit
from $38.49
This product is not rated
Ultra Seal: Harmonic Balancer Bolt/Washer Kit
Performance Engine Harmonic Balancers