Ford Custom 500 Belts and Hoses
Top Ford Custom 500 Belts and Hoses Categories
We carry over 227 Belts and Hoses in inventory for the Ford Custom 500. If you’re looking for aftermarket Belts and Hoses for your Ford Custom 500, check out all these categories:
Essential Ford Custom 500 Belts and Hoses
Gates – Molded Coolant Hose (Part No.20704)
from
$23.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- The specially designed materials resist collapse under vacuum.
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-formed for a good fit and to ensure perfectly sealed connections
- EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
- Compliant with the requirements of SAE 20R4, class D2 and DIN 73411, class A standards (except with regard to tolerances)
- temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Warning: Do not use for fuel or oil transfer applications
Gates – Premium Molded Coolant Hose (Part No.20573)
from
$28.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specifically designed to resist collapse under vacuum
- Designed to resist electrochemical degradation, which is the primary cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
- It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transport applications.
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26501)
from
$29.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Designed to resist electrochemical degradation, which is the primary cause of hose failure
- Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
- EPDM tube and Neoprene cover for extended service life
- Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
- Heat, oil and ozone resistant
- Meets SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transport applications.
- Caution: Do not use for fuel or oil transfer applications.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9" Long, 1.75" Diameter (Part No.B70446)
from
$11.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Vulco-Flex II Flexible Coolant Hose (Part No.25530)
from
$41.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
Product Features:
See More
Product Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimal inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature range: up to +257 Degrees F (+125 Degrees C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transport applications.
Gates – Premium Molded Coolant Hose (Part No.20225)
from
$47.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to resist electrochemical degradation, the main cause of casing failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
- It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transport applications.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7" Long, 1.75" Diameter (Part No.B70470)
from
$19.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Imperial – Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Size: 1/2 in. x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Medium duty applications
Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)
from
$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Used on Chevrolet V8 applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Comes with all parts needed for the job
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Driveworks – Automotive V-Belt, Driveworks (Part No.52513)
from
$4.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Gates – Automotive XL High Capacity V-Belt (Part No.9500)
from
$37.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resistant to oil, heat, ozone, weathering and aging for a longer belt life.
- Meets or exceeds SAE J636C specifications
Gates – Automotive XL High Capacity V-Belt (Part No.9520)
from
$41.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-reinforced rubber adds flexibility along the entire length of the belt and ensures greater lateral stability in the pulley.
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally active tension cords for maintenance-free operation when the belt is properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Dorman – Help – Carburetor Pre-Heater Hose – 2 In. x 18 In. – Aluminum (Part No.96024)
from
$8.49
This HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC control duct hose is designed to match the fit and function of the original hose on specified vehicles
- Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 25 Inch Length (Part No.80414)
from
$14.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.80400)
from
$19.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)
from
$1.99
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Specifically designed to be compatible with all common coolants and coolant additives
- Constructed using all EPDM compounds and spiral reinforcements
- Similar to SAE 20R3, Class D-2
- Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 60 Inch Length (Part No.80407)
from
$17.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Dayco – Straight Heater Hose; EPDM Rubber, 3/4 Inch Diameter (sold by foot) (Part No.80273)
from
$1.29
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Specifically designed to be compatible with all common coolants and coolant additives
- Constructed using all EPDM compounds and spiral reinforcements
- Similar to SAE 20R3, Class D-2
- Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 36 Inch Length (Part No.80405)
from
$23.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 3.25" Long, .63" Diameter (Part No.A70001)
from
$6.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length (Part No.80404)
from
$20.79
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Gates – ThermalPro Premium Molded Coolant Hose (Part No.20338)
from
$9.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specifically designed to resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28411)
from
$3.79
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for long periods of time, which prolongs the service life
- Compliant with SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Warning: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Premium Molded Coolant Hose (Part No.20662)
from
$21.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- The specially designed materials resist collapse under vacuum.
- Designed to resist electrochemical degradation, the main cause of casing failure
- Pre-shaped to fit and ensure a perfect seal
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
- Caution: Do not use for fuel or oil transport applications.
Ford Custom 500 Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your Ford Custom 500
You love your Custom 500. So we’ve made it easier than ever to help you find Ford Custom 500 Belts and Hoses in our online catalog. Our inventory holds 227 aftermarket and OEM Belts and Hoses for your Ford Custom 500, ranging from $1.29 to $59.99.
We offer parts from 5 brands trusted to make quality Belts and Hoses for your Ford Custom 500. Before you buy, take some time to read through customer reviews. We currently have 11,743 reviews of Ford Custom 500 Belts and Hoses from previous customers. Some of the top rated parts include Automotive V-Belt, Driveworks with 4.3 stars and Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 36 Inch Length with 4.5 stars.
Find your Custom 500 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Ford Custom 500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your Ford Custom 500
Our inventory holds Belts and Hoses for your Ford Custom 500 from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Imperial, and Dorman, all of which can keep that Ford happy.
We have Dorman – Help parts available for your Ford Custom 500 in categories like Duct Hoses. Some of the top-rated Dorman – Help parts in these categories are:
Top-Rated Dayco Belts and Hoses
Leading Dayco Belts and Hoses
We carry Dayco brand parts for your Ford Custom 500 across several catalog categories, including Heater Hoses. Some of our most reviewed Dayco parts include:
from
$10.99
(27)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5.50" Long, .63" Diameter
Heater Hoses
FAQs for Ford Custom 500 Belts and Hoses
What are the most purchased Belts and Hoses for the Ford Custom 500?
Out of 227 Belts and Hoses for the Ford Custom 500, the most popular in our inventory are:
from
$1.99
This product is not rated
Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot)
Heater Hoses
What are the top-rated Ford Custom 500 Belts and Hoses?
Top-rated Belts and Hoses for your Ford Custom 500 based on customer reviews/ratings are:
from
$23.49
(11)
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 36 Inch Length
“1997 Jeep. Some reviews said hard to get on the water pump end. Used some Vaseline and it went on easy.”
from
$18.99
(9)
Bottom Cog V-Belt; 45 Inch Long, Exact Fit Premium Quality
“Put it on my 1953 Chevy Bel Air around the vintage air conditioning, the camshaft and crankshaft pulleys”
