Ford CT800D Parts

Ford CT800D Alternators and Starters

from

$367.99

Carquest Starters with 100% NEW construction will restore hard working vehicles to exceed OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest HD alternators are primed to keep you moving forward. Built to perform in severe duty environments where consistent efficient high outputs are required.

Product Features:

Product Features:

Contains Innovative Brush-less and Premium Brush Components that have been tested and certified for highest possible power output
Stator – wound to OE specifications. Heavy coated Polyester wire provides consistent conductivity
Premium Transpo rectifiers use 13mm press fit Diodes for maximum performance
Rotor shafts CNC machined & precision balanced to eliminate vibration
Over-Voltage shutdown limits voltage if output terminal is disconnected form the battery
Load dump protection ensures transient voltage spikes do not damage transistor
Improved power transmission with lower engine speed keeps accessories and powered implements running at maximum output without additional load to the engine.

from

$346.99

High quality components form the foundation our parts are built from. Transpo’s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
Integrated magnetic switch provides protection against weak power from batteries.
Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
Load dump protection ensures transient voltage spikes do not damage transistor
Improved power transmission with lower engine speed keeps accessories and powered implements running at maximum output without additional load to the engine.

from

$369.99

Product Features:

Contains Innovative Brush-less and Premium Brush Components that have been tested and certified for highest possible power output
Stator – wound to OE specifications. Heavy coated Polyester wire provides consistent conductivity
Premium Transpo rectifiers use 13mm press fit Diodes for maximum performance
Rotor shafts CNC machined & precision balanced to eliminate vibration
Over-Voltage shutdown limits voltage if output terminal is disconnected form the battery
Load dump protection ensures transient voltage spikes do not damage transistor
Improved power transmission with lower engine speed keeps accessories and powered implements running at maximum output without additional load to the engine.

from

$408.99

High quality components form the foundation our parts are built from. Transpo’s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
Integrated magnetic switch provides protection against weak power from batteries.
Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
Load dump protection ensures transient voltage spikes do not damage transistor
Improved power transmission with lower engine speed keeps accessories and powered implements running at maximum output without additional load to the engine.

Ford CT800D Engine Parts

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$1.79

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$13.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

Ford CT800D Belts and Hoses

from

$34.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$15.29

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$14.29

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability

from

$47.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material provides optimal performance at extremely high operating temperatures.
Construction that resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
Problem solver for failed disks
Designed to save your fleet’s money and reduce downtime
Meets RMA standards for oil and heat resistance and static conductivity requirements

from

$31.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$56.99

The fiber-filled rubber adds flexibility along the entire length of the belt and provides greater lateral stability in the pulley.
Ground to ensure precise dimensional control of the top width and sidewall for proper adjustment to the pulley.
Thermoactivated pull cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather, and decay to improve belt life
Meets or exceeds SAE J636C specifications

from

$4.99

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$67.99

The patented material provides optimal performance at extremely high operating temperatures.
Construction that resists cracking, wear, oil and heat
The special compound provides unprecedented flexibility, stability, load-bearing capacity and belt life.
Unique under-cord notch pattern provides greater flexibility for smaller diameter pulleys
Problem solver for failed disks
Designed to save your fleet money and reduce downtime
Meets RMA oil and heat resistance standards and static conductivity requirements

from

$49.99

The patented material provides optimal performance at extremely high operating temperatures.
Heavy-duty construction resists cracking, wear, oil and heat
A special compound ensures unmatched stability, load capacity and belt life.
Unique notch pattern offers greater flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA standards for oil and heat resistance and static conductivity requirements

from

$2.49

This premium Dayco Insulone Heater Hose delivers heated coolant to the heater core with minimal heat loss. The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives. A special compound used in the insulating layer provides an added measure of protection against heat loss. Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: NOT suitable for fuel or oil transfer.

Product Features:

Synthetic EPDM rubber compounds and spiral reinforcement provides excellent burst strength and heat resistance
Compatible with all common coolants and coolant additives
Insulating layer provides an added measure of protection against heat loss
Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$25.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

Looking for the best Ford CT800D aftermarket replacement parts? Replacing worn and broken parts on your Ford CT800D? Check out our online catalog to find the best selection of aftermarket Ford CT800D parts as well as real user reviews on Ford CT800D replacement parts. Make an informed decision about every component you add to your CT800D.

At Advance Auto, we’ve got you covered when it comes to getting your Ford CT800D in tip top condition. We’ve got over 51 Ford CT800D parts to choose from in popular categories like Ignition and Tune-Up Products, Alternators and Starters and Engine Parts. If you’re looking for the best prices, try searching our Ford CT800D parts catalog to compare OEM and aftermarket parts for your Ford CT800D.

Whether you need Ford CT800D body parts, interior components, or custom Ford CT800D parts you can find them online at Advance Auto. Want to order your Exhaust Parts online? Or maybe you need your Ford Belts and Hoses same day? No problem, you can pick up CT800D parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Ford CT800D parts has never been easier.

Advance Auto customers frequently search for the following types of Ford CT800D auto parts. Check out customer reviews and ratings, and compare prices on the following Ford CT800D parts:

People also search Advance Auto for these popular years of the Ford CT800D:

Ford CT800D Parts

Top Ford CT800D Parts Categories

Ford CT800D Alternators and Starters

Carquest HD Electrical – Alternator: New, 160 Amps, Without Pulley (Part No.71-8329N)

Carquest HD Electrical – Alternator: New (Part No.71-12490N)

Carquest HD Electrical – Alternator: New, 200 Amps (Part No.71-12715N)

Carquest HD Electrical – Alternator: New, 130 Amps (Part No.71-7612N)

Ford CT800D Engine Parts

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Dorman – Steel Cup Expansion Plug 13.70mm, Height 0.180 (Sold by each) (Part No.555-007)

Felpro – Engine Oil Pan Gasket Set 18 Bolt Hole Multi Piece Gasket (Part No.OS 30461 C)

Ford CT800D Belts and Hoses

Gates – Premium Molded Coolant Hose (Part No.21375)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.50" Long, 1.50" Diameter (Part No.B70020)

Dayco – Bottom Cog V-Belt; 39 Inch Long, Exact Fit Premium Quality (Part No.17390)

Gates – FleetRunner Heavy-Duty V-Belt (Part No.9660HD)

Gates – Automotive XL High Capacity V-Belt (Part No.9395)

Gates – Automotive XL High Capacity V-Belt (Part No.9720)

Driveworks – Automotive V-Belt, Driveworks (Part No.39017)

Gates – FleetRunner Heavy-Duty V-Belt (Part No.9720HD)

Gates – FleetRunner Heavy-Duty V-Belt (Part No.9680HD)

Dayco – Straight Heater Hose: EPDM Rubber, Universal Fit, 7/8" Inside Diameter (sold by foot) (Part No.80318)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7.50" Long, 1.50" Diameter (Part No.B70541)

Search Over 51 Ford CT800D Parts Online for Delivery or Pick Up

Popular Types of Parts for Ford CT800D

Find Parts for Your Ford CT800D by Year

More Popular Parts for All Makes