Ford C-MAX Wheel Hubs

Product Features:

• Brand may vary by location

DRIVEWORKS Wheel Hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hubs are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hubs.

Product Features:

• Constructed from quality materials for extended durability
• Precision-matched components deliver smooth and quiet operation
• Manufactured to strict engineering quality standards
• Brand may vary by location

Tough One Wheel Hubs are designed to meet or exceed original equipment (OE) standards in form, fit and function. These wheel hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Tough One Wheel Hubs. Wheel Hubs come with wheel studs, bearings are not included.

Product Features:

• Brand may vary by location

Wheel Hubs are an integral component of the wheel assembly. That’s why our industry-leading evaluation process ensures that our hubs are designed for long-lasting reliability.

Product Features:

• Comes with axle nut (where applicable)
• Sturdy steel construction
• Bearings press onto the hubs for ease of installation
• Quality inspection includes dimensional checks, materials testing, and hardness testing
• Brand may vary by location

Wheel Hub is an integral component of the wheel assembly, crucial to establishing the handling characteristics of your vehicle.

Product Features:

• Constructed from high-quality materials for extended durability
• Replacement eliminates noises associated with original failure
• Precision-matched components deliver smooth and quiet operation
• Manufactured to strict engineering quality standards
• Brand may vary by location

DRIVEWORKS Wheel Hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hubs are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hubs.

Product Features:

• Constructed from quality materials for extended durability
• Precision-matched components deliver smooth and quiet operation
• Manufactured to strict engineering quality standards
• Brand may vary by location

Wheel Hubs are an integral component of the wheel assembly, crucial to establishing the handling characteristics of your vehicle. That’s why Dorman’s industry-leading evaluation process ensures that our hubs are designed for long-lasting reliability and performance. Plus, Dorman’s vehicle try-on testing ensures a proper fit, every time.

Product Features:

• Comes with axle nut (where applicable)
• Sturdy steel construction
• Bearings press onto the hubs for ease of installation
• Quality inspection includes dimensional checks, materials testing, and hardness testing

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

• Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
• Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
• Special bearing seals to help keep out contaminants, the number one cause of bearing failure
• Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
• Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
• Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
• Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
• Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
• Integral bearing races specifically designed to each application, no one-size-fits-all solution
• Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
• Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
• Original equipment specifications minimize any possibility of the hub cracking
• Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
• Tapered roller bearings for high load rates when specified

This wheel hub is a direct replacement for the original equipment hub. It has undergone rigorous testing to ensure a proper fit and reliable performance over a long service life.

Product Features:

• Ideal replacement – this wheel hub is a direct replacement for the original equipment hub to ensure proper performance
• Durable construction – this part is made of quality materials for a long service life
• Cost-effective solution – offers original equipment quality at a competitive price
• Quality assured – this wheel hub has undergone dimensional checks and materials and hardness testing to ensure quality standards

SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. SKF wheel hub bearing units carry a flange for wheel and brake rotor attachment and a second flange for fixing the unit to the suspension. This fully integrated system provides a significant simplification in corner design and handling when compared with more traditional designs. The dynamic load carrying capacity is maximized by the use of a separate inner ring for the inboard ball row. This ring is mounted with an interference fit. The outer ring flange is bolted to the suspension. The rotating inner ring, with its tough flange, spigot and threaded holes or studs, is designed for mounting of the brake and wheel. Greased and sealed for life, the SKF wheel hub assembly is used for both driven and non-driven wheel applications. For driven wheel applications, torque is transmitted to the inner ring via an included spline.

Product Features:

• OE sensors assure correct ABS functions
• Premium seals, both inboard and outboard, protect the bearing
• Wheel bearing design with ball bearings or tapered roller bearings and integral wheel hub.
• The bearing units have preset internal clearance, are supplied greased for life and have integrated seals.
• Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
• 100% tested to the actual OE specifications per part number for fit, form and function
• High quality steel and surface finishes
• Proper implementation of heat treatment

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

• Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
• Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
• Special bearing seals to help keep out contaminants, the number one cause of bearing failure
• Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
• Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
• Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
• Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
• Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
• Integral bearing races specifically designed to each application, no one-size-fits-all solution
• Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
• Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
• Original equipment specifications minimize any possibility of the hub cracking
• Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
• Tapered roller bearings for high load rates when specified

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

• Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
• Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
• Special bearing seals to help keep out contaminants, the number one cause of bearing failure
• Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
• Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
• Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
• Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
• Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
• Integral bearing races specifically designed to each application, no one-size-fits-all solution
• Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
• Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
• Original equipment specifications minimize any possibility of the hub cracking
• Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
• Tapered roller bearings for high load rates when specified

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

• Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
• Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
• Special bearing seals to help keep out contaminants, the number one cause of bearing failure
• Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
• Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
• Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
• Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
• Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
• Integral bearing races specifically designed to each application, no one-size-fits-all solution
• Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
• Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
• Original equipment specifications minimize any possibility of the hub cracking
• Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
• Tapered roller bearings for high load rates when specified

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

• Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
• Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
• Special bearing seals to help keep out contaminants, the number one cause of bearing failure
• Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
• Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
• Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
• Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
• Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
• Integral bearing races specifically designed to each application, no one-size-fits-all solution
• Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
• Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
• Original equipment specifications minimize any possibility of the hub cracking
• Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
• Tapered roller bearings for high load rates when specified

SKF manufactures OE quality wheel hub assemblies that provide superior performance and durability.

Product Features:

• OE Quality
• High quality steel and surface finishes
• Proper implementation of heat treatment
• Precise engineered hub surface provide maximum load capacity and durability

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

• Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
• Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
• Special bearing seals to help keep out contaminants, the number one cause of bearing failure
• Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
• Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
• Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
• Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
• Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
• Integral bearing races specifically designed to each application, no one-size-fits-all solution
• Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
• Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
• Original equipment specifications minimize any possibility of the hub cracking
• Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
• Tapered roller bearings for high load rates when specified

Wheel Hub