from

$32.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$118.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$164.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FIAT 07-19;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2007-2019
Weight approx: 3 Lbs

from

$119.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$31.10

Bosch Camshaft Position Sensors provide Angle for engine management: Camshaft sensors detect the camshaft position for the injection sequence.

Product Features:

Robust design with Twist insensitive mounting (TIM)
Reliable digital measurement and wide temperature range
High accuracy and long service life

from

$49.42

All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.

Product Features:

Built-in circuit protection to ensure your electronics and computer systems stay unharmed
High reliability of pressure sensing proved in gasoline and diesel direct injection systems
Sturdy design, vibration resistant and thermal stability

from

$94.99

Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

from

$158.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:

Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$214.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$76.99

Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$77.99

Manifold Absolute Pressure Sensor

from

$30.79

Bosch Manifold Absolute Pressure (MAP) Sensors provide accurate air pressure measurement to very fine tolerances for efficient engine performance.

Product Features:

Extremely sturdy design with a special coating for resistance of harmful chemicals inside the intake manifold.
Bosch continually improves its MAP sensor designs with the latest chip technology.
Designed to meet or exceed your vehicle’s original equipment specifications (performance, driveability, economy, emissions)

from

$6.99

Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.

Product Features:

Manufactured from high quality materials for a long service life
Torque values listed on parts (where applicable)
Easy to install
Constructed to strict engineering quality standards

from

$56.91

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$1371.99

CARDONE 100% New Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every CARDONE turbocharger has been designed and tested to guarantee O.E. fit and performance. CARDONE is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.

Product Features:

100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
Unit comes with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.
Unit comes with a pre-lube syringe to ensure product protection during installation.
Manufactured with 100% new components and tested to ensure trouble-free operation
100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
All units come with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.

from

$626.99

Rotomaster 100% New Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.

Product Features:

100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
Unit comes with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.
Unit comes with a pre-lube syringe to ensure product protection during installation.
Manufactured with 100% new components and tested to ensure trouble-free operation
100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
All units come with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.
Comes with a pre-lube syringe to ensure product protection during installation.

from

$201.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$43.99

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
Teflon coated profile round tooth belt designed for specific high performance, high temperature engines