Ferrari California Parts

Name: MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon
Brand: Valvoline
SKU: 773775
Price: 35.99 USD
Rating: 5.0 (446 reviews)

Please Select your Vehicle to See Exact Fit Parts

Ferrari California Drivetrains

from

$35.99

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$13.99

Valvoline Import Multi-Vehicle Automatic Transmission Fluid is specifically formulated for use in most Toyota, Nissan, Honda and other imported vehicles. It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles. Recommended for use in the following applications: Ford MERCON, GM DEXRON-II and DEXRON-III, BMW LT 71141 and ETL-7045E, Nissan/Infiniti Nissan ATF, Matic-D, Matic-K and Matic-J, Mitsubishi Diamond SP-II and SP-III, Subaru ATF-HP, Hyundai/ KIA SP-II and SP-III, Toyota/Lexus Type T, T-III and T-IV, Honda/Acura ATF-Z1 (except in CVTs), Mercedes Benz NAG1, Volvo passenger car (except AW-1), and Volkswagen/Audi TL52162. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Ferrari California Automotive Accessories

from

$99.99

The Premium Car Cover is our one of kind 3-layer cover. Made from 3 durable layers, this cover provides unparalleled waterproof protection for your vehicle. The Budge Premium car cover combines multiple layers of exceptionally waterproof polypropylene with an interior waterproof membrane while the inner most layer of the cover is comprised of a nonabrasive fleece-like material. This cover is also UV treated to protect against harsh sun exposure.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
Material has a soft inner lining that will not scratch the surface of your vehicle
Built-in strap and buckle system keeps cover secure
This car cover is made from 3 durable layers that will keep your vehicle protected
Full elastic hem creates a comfortable fit

from

$99.99

The Budge Rain Barrier car cover offers easy to use, 100% waterproof indoor and outdoor protection. This vehicle cover is constructed from a 3 layer material consisting of an inside and outside layer of spun-bond polypropylene. The middle layer is made from a waterproof film. Unlike most waterproof car covers, the Budge Rain Barrier features micro-pore technology that allows condensation to escape as evaporated gas, giving your vehicle inside and outside protection. This cover is great for outdoor and indoor use. The soft, nonabrasive material will not harm the surface of your vehicle. This cover features a full elastic hem and built-in grommets. This cover is available in a tan color. Includes a storage bag and antenna patch. Our car covers are available in a variety of sizes that will popular car makes and models. This car cover fits cars 200″ L x 60″ W x 51″ H.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H.
This waterproof car cover will defend against outdoor elements like rain, snow, sun, dirt, dust and more
This car cover is made from a 3 layer microporous material that makes an ultimate rain barrier
This vehicle cover features ultrasonically welded seams for extra durability
Elasticized hem and sewn-in grommets hold your car cover in place in windy-conditions

from

$69.99

The Ultra car cover offers protection against dust, debris, tree sap and other environmental pollutants. This lightweight vehicle cover is comprised of 3 layers of polypropylene. Our duor car covers are fully breathable, with ultra-sonically welded seams for added durability. This cover is perfect for garage or carport stored vehicles, and can also be used for short-term outdoor storage. This soft, nonabrasive material will not harm the surface of your vehicle. The Ultra cover features a full elastic hem and built-in grommets. This auto cover is gray in color and includes a storage bag and antenna patch. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This car cover is made from a 3 layer, UV resistant material that will protected your vehicle’s paint from fading
This car cover is water resistant and features ultrasonically welded seams for extra durability
Cover is suitable for short term outdoor protection and long-term indoor protection
This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

from

$159.99

Lightweight and thin, the special edition indoor stretch car cover from Budge is perfect for luxurious indoor protection against dust and air-borne pollutants. Silky to the touch with a soft fleece lining this vehicle cover stretches and conforms to the curves of your vehicle for a custom-like fit. This indoor car cover is ideal for long-term vehicle storage and garage kept vehicles. The thickness of the auto cover helps keep out dust and other indoor environmental hazards. The indoor stretch material is completely nonabrasive and will not scratch your vehicles surface. This cover is available in red, silver gray or black. A storage bag included for when not protecting your vehicle. Our covers are available in a variety of sizes that will popular car makes and models.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

from

$159.99

This car cover fits cars 200″ L x 60″ W x 51″ H
This indoor vehicle cover is made from a stretchable material conforms to you car
Extremely soft fleece lining to protect your car from scratches
This auto cover is suitable for indoor use or for garage kept vehicles
This car cover fits vehicles like: Ford Mustang, Chevrolet Corvette Stingray Coupe, Chevrolet Corvette, Ford Thunderbird, Honda Civic

from

$45.99

The Budge Basic car cover offers single layer, basic protection against dust and debris – at a budget friendly price. Lightweight and easy to use, this vehicle cover is perfect for indoor use or occasional outdoor protection. The Budge Basic car cover is constructed from a single layer of polypropylene. This material is fully breathable to prevent mold and mildew. This cover is nonabrasive and will not harm your vehicle’s exterior. Our Budge Basic car covers are light gray in color. This is a suitable indoor and short term outdoor cover for your car. Our covers are available in a variety of sizes that will popular car makes and models. Cover includes a storage bag and antenna patch.

Product Features:

This car cover fits cars 200″ L x 60″ W x 51″ H
This car cover is suitable for indoor and short term outdoor storage
This vehicle cover features double stitched seams for added durability
A full elastic hem helps keep the car cover securely on your vehicle
Will defend against dust, dirt, bird droppings, tree sap and more

from

$117.99

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

from

$117.99

Custom fit to the windshield for complete coverage
Protect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use

Ferrari California Wheels and Tires

from

$13.99

Product Features:

Titanium
Adjustable 0-36 degrees
High quality coating to prevent corrosion
Only one tool needed (35 in-lbs)

from

$13.99

Product Features:

Black
Adjustable 0-36 degrees
High quality coating to prevent corrosion
Only one tool needed (35 in-lbs)

from

$13.99

Product Features:

Black
Adjustable 0-36 degrees
High quality coating to prevent corrosion
Only one tool needed (35 in-lbs)

from

$68.99

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

MX-Sensor Components
4 Metal Valves
4 Rubber Valves
Rubber Gasket (2×10 pcs)
Screw Nut (2×10 pcs)
Washer (2×10 pcs)
Metal Valve Cap (2X10 pcs)
Rubber Valve Cap (2X10 pcs)
Valve Core (2X10 pcs)

from

$14.99

Ball-seat valve stem assembly with internal shear ring.

Product Features:

43mm
Rim Hole Compatibility: 0.453″
200 PSI maximum cold inflation pressure

from

$11.49

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

Includes 4 Rubber Press-in Valve Stems
Compatible with Autel 1-Sensors
Compatible with Autel 315MHz & 433MHz MX-Sensors
Warranty on Material and Workmanship
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$1.99

Parts Kit For Imports

from

$13.29

Complete Valve Kit for Huf Baolong Electronics (BH Sens) OE and Aftermarket sensors.

Product Features:

OE quality metal valve
Valve, plastic cap, core, grommet, and shear collar hex nut are all included.
Corrosion protection.
Flexible valve angle 0 to 36 degrees.
Flexible Valve Angle 0 To 36 Degrees.

from

$9.99

Complete Valve Kit for Huf Baolong Electronics (BH Sens) OE and Aftermarket sensors.

Product Features:

OE quality metal valve
Valve, plastic cap, core, grommet, and shear collar hex nut are all included.
Corrosion protection.
Flexible valve angle 0 to 36 degrees.
Flexible Valve Angle 0 To 36 Degrees.

from

$10.49

Product Features:

Silver
Adjustable 0-36 degrees
High quality coating to prevent corrosion
Only one tool needed (35 in-lbs)

from

$9.49

Product Features:

Silver
Adjustable 0-36 degrees
High quality coating to prevent corrosion
Only one tool needed (35 in-lbs)

from

$13.29

Complete Valve Kit for Huf Baolong Electronics (BH Sens) OE and Aftermarket sensors.

Product Features:

OE quality metal valve
Valve, plastic cap, core, grommet, and shear collar hex nut are all included.
Corrosion protection.
Flexible valve angle 0 to 36 degrees.
Flexible Valve Angle 0 To 36 Degrees.

from

$5.49

The CV-001 is a black metal press-in valve stem for the 1-Sensor.

Product Features:

Black Metal Press-in Valve Stem
Compatible with Autel 1-Sensor

from

$4.99

The CV-002 is a titan grey metal press-in valve stem for the 1-Sensor.

Product Features:

Titan Grey Metal Press-in Valve Stem
Compatible with Autel 1-Sensor

from

$42.99

Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).

Product Features:

Programmable – Only take 3 seconds to configure to specific application. Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others.
Always up-to-date with the new programming function via the TPMS diagnostic tool
Reprogrammable and Copy Clone Capable
Full WAL and PAL technology support for auto-locate.
Rubber valve included.

from

$173.99

Huf Baolong Electronics (BH Sens) provides the market with OE Replacement sensors that are exactly like the OE sensor provided to the manufacturer and being replaced. The replacement tire sensors can be installed directly without programming, just relearn the sensors to the vehicle with a TPMS tool after install.

Product Features:

Ready out of the box – no programming required
Equivalent in function and quality of the OE Sensor
Quick and easy installation. Only need to relearn to vehicle upon installation.
Full WAL technology support for auto-locate.
Metal valve included.
Flexible valve angle 0 to 36 degrees.
For specific models from Aston Martin, Audi, Bentley, BMW, Ferrari, Lamborghini, Maserati, McLaren, Mini, Porsche, Rolls Royce, Tesla

from

$34.99

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$11.49

Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.

Product Features:

Four Metal Valve Stems
Press-in interchangeable metal valve stem
Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
Press release valve design allows easy installation without a tool for sensor head fitting
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$8.99

Product Features:

Chrome Grey Metal Press-in Valve Stem
Compatible with Autel 1-Sensor
Warranty on Material and Workmanship

from

$7323.00

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$579.99

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz & 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve.
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$579.99

The MX-Sensor 1-SensorM Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-SensorM features a combined frequency of 315MHz & 433MHz with metal valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-SensorM is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve.
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$44.99

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$29.99

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Maximum Signal Strength, Battery Reliability.
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Meets SAE Standards J1205 and J1206
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$44.99

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
100% ID clone-able with no relearn required
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

Ferrari California Ignition and Tune-Up Products

from

$14.99

NGK Laser Platinum High Ignitability spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum High Ignitability plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Laser Platinum High Ignitability spark plugs feature a raised platinum pad on the ground electrode for even wear in distributorless ignition systems and improved spark performance.

Product Features:

ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: SPE tip & iridium alloy center electrode produce the most advanced OE spark plug technology
PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
SPE DESIGN: Square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE SPE platinum alloy plugs

from

$2.99

Autolite Copper spark plugs are designed to provide reliable performance and durability for your vehicle. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes are engineered for extended life, while the high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation strength. With a nickel-plated shell, these plugs resist corrosion, making them ideal for long-term use. The standard center electrode design with a short projection and nickel tip material ensures dependable ignition performance. Designed with a flat seat type and integrated resistor, these spark plugs deliver quick starts and meet the demands of regular-grade applications. Whether you’re looking for enhanced durability or reliable starts, these spark plugs are built to meet your vehicle’s performance expectations.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
The integrated resistor design ensures quick starts and reliable ignition performance, catering to the demands of regular-grade applications.

Looking for the best Ferrari California aftermarket replacement parts? Replacing worn and broken parts on your Ferrari California? Check out our online catalog to find the best selection of aftermarket Ferrari California parts as well as real user reviews on Ferrari California replacement parts. Make an informed decision about every component you add to your California.

At Advance Auto, we’ve got you covered when it comes to getting your Ferrari California in tip top condition. We’ve got over 89 Ferrari California parts to choose from in popular categories like Drivetrains, Automotive Accessories and Fuel and Emissions Systems. If you’re looking for the best prices, try searching our Ferrari California parts catalog to compare OEM and aftermarket parts for your Ferrari California.

Whether you need Ferrari California body parts, interior components, or custom Ferrari California parts you can find them online at Advance Auto. Want to order your Wheels and Tires online? Or maybe you need your Ferrari Ignition and Tune-Up Products same day? No problem, you can pick up California parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used Ferrari California parts has never been easier.

Advance Auto customers frequently search for the following types of Ferrari California auto parts. Check out customer reviews and ratings, and compare prices on the following Ferrari California parts:

People also search Advance Auto for these popular years of the Ferrari California:

Ferrari California Parts

Valvoline – MaxLife Multi-Vehicle Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Valvoline – Import Multi-Vehicle Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822389)

Budge – Budge Premium Car Cover, 3 Layer Moderate Weather Protection for Cars, Fits Cars up to 16′ 8" (Part No.3LF3)

Budge – Rain Barrier Car Cover, Grey Size 3: Fits Cars up to 200 in. L, Outdoor Protection (Part No.RSD-3)

Budge – Ultra Car Cover, Gray, Size 3: Fits up to 16’8" L, 3 Layers, Water Resistant, Scratchproof, Dustproof (Part No.D-3)

Budge – Indoor Stretch Car Cover, Red Size 3: Fits Up To 16’8" L, Soft Inner Lining (Part No.RSC-3)

Budge – Indoor Stretch Car Cover, Black, Size 3: Fits Up To 16’8" L, Soft Inner Lining (Part No.BSC-3)

Budge – Budge Basic Car Cover, Gray, Size 3: Fits up to 16’8" L, Scratch Resistant, Breathable, Dustproof (Part No.B-3)

Covercraft – UVS100 Custom Sunscreen – Blue Metallic (Part No.UV11337BL)

Covercraft – UVS100 Custom Sunscreen – Silver (Part No.UV11337SV)

Huf North America – Aluminum Valve 48mm (Part No.RDV029)

Huf North America – Aluminum Valve 49mm (Part No.RDV030)

Huf North America – Aluminum Valve 48mm (Part No.RDV028)

Autel – MX-Sensor Component Kit (Part No.MXSENSORCK)

Dill Air Control – Clamp-In TPMS Service Kit: Metal, 43Mm Ball-Seat Valve; W/ Shear Ring (Part No.1096)

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

Xtra Seal – Parts Kit For Imports (Part No.15-20211)

Huf North America – Metal Flexible Angle TPMS Valve – Black 43 mm (Part No.RDV026)

Huf North America – Metal Flexible Angle TPMS Valve – Silver 48 mm (Part No.RDV022)

Huf North America – Silver Finish-Includes Valve, Plastic Cap, Core, Grommet, Shear Collar Hex Nut (Part No.RDV025)

Huf North America – Silver Finish-Includes Valve, Plastic Cap, Core, Grommet, Shear Collar Hex Nut (Part No.RDV024)

Huf North America – Metal Flexible Angle TPMS Valve – Titanium 43 mm (Part No.RDV027)

Autel – Black Metal Press-in Valve for 1-Sensor (Part No.CV-001)

Autel – Titan Grey Metal Press-in Valve for 1-Sensor (Part No.CV-002)

Huf North America – Tire Pressure Monitoring System (TPMS) Sensor (Part No.UVS7051)

Huf North America – Tire Pressure Monitoring System (TPMS) Sensor (Part No.RDE048V21)

Autel – Adjustable Angle MX-Sensor 1-Sensor (Rubber) (Part No.300020)

Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)

Autel – Chrome Metal Press-in Valve for 1-Sensor (Part No.CV-003)

Autel – 1-Sensor Bulk Box (240-Pack, Rubber Valve) (Part No.300050)

Autel – MX-Sensor 1-Sensor: TPMS Sensors With Rubber Valve Stems, Bulk Box (20-Pack) (Part No.300010)

Autel – MX-Sensor 1-SensorM: TPMS Sensors With Metal Valve Stems, Bulk Box (20-Pack) (Part No.300060)

Autel – MX-Sensor 1-Sensor with Press-in Metal Valve Stem and Combined Frequency (Part No.1-SENSORM)

Autel – Adjustable Angle Programmable Universal TPMS Sensor – Metal, Dual Frequency (Part No.300030)

Autel – MX-Sensor 1-Sensor with Press-in Rubber Valve Stem and Combined Frequency (Part No.1-SENSOR)

NGK – Laser Platinum Spark Plug (SPMR8A6HDG): High Ignitability & Durability (Part No.92264)

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.4303)