Dodge Rampage Exhaust Parts
Top Dodge Rampage Exhaust Parts Categories
We carry over 13 Exhaust Parts in inventory for the Dodge Rampage. If you’re looking for aftermarket Exhaust Parts for your Dodge Rampage, check out all these categories:
Essential Dodge Rampage Exhaust Parts
Walker – Catalytic Converter Air Tube (Part No.35574)
from
$87.99
Complete your exhaust repair with a Walker air intake tubing. Designed to work seamlessly with OE and Walker rubber intake parts, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CUSTOMIZABLE FIT – Universal fit for installation flexibility
- COMPATIBILITY – Features OD-OD sized ends designed to work seamlessly with OE and Walker rubber intake parts
- QUALITY MATERIALS – Made from aluminum for durability and long life
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- New Walker accessories help to ensure effective exhaust repairs
Walker – SoundFX Direct Fit Exhaust Muffler 1.875" Inlet (ID) 1.875" Outlet (OD) (Part No.18449)
from
$62.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION – Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and welding
- FACTORY SOUND – Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER – Designed and tested to extend muffler life
Walker – SoundFX Universal Exhaust Muffler 1.875" Inlet (ID) 1.875" Outlet (OD) (Part No.18179)
from
$95.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION : Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST : Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- FLEXIBLE SOLUTION : Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- FACTORY SOUND : Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER : Designed and tested to extend muffler life
Felpro – Exhaust Pipe Flange Gasket (Part No.60632)
from
$10.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Standard EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID) (Part No.15036)
from
$83.99
Product Features:
See More
- EPA COMPLIANT – For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED – Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
Walker – CalCat CARB Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID) (Part No.80900)
from
$921.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
Walker – Standard EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID) (Part No.15031)
from
$131.99
Product Features:
See More
- EPA COMPLIANT – For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- NO BREAK IN REQUIRED – Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
MagnaFlow – Universal Standard Grade Federal / EPA Compliant Catalytic Converter (Part No.94014)
from
$126.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94014. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Compact, lightweight construction enables installation in confined areas, welding is required
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
MagnaFlow – Universal California Grade CARB Compliant Catalytic Converter (Part No.3391014)
from
$1214.00
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3391014. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Dorman – Help – Manifold Bolt and Spring Kit – M8-1.25 x 76mm (Part No.03143)
from
$14.49
Designed for an exact fit, our Exhaust Bolt & Spring. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Rust and corrosion resistant
- Durable hardened and spring steel construction
- New hardware helps fix exhaust leaks
- Also available separately (where applicable)
Dorman – Help – Manifold Bolt and Spring Kit – M8-1.25 x 74mm (Part No.03128)
from
$13.49
Exhaust manifold fastener kits provide a time-saving solution for repairing the manifold. Each kit is designed for direct replacement of rusted or damaged exhaust bolts and springs.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust spring and bolt match the fit and function of the factory parts on specified years, makes and models
- Ideal solution – reliable replacement for the original parts that are missing or have failed due to heat and corrosion
- Durable construction – made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Walker – Exhaust Clamp (Part No.35344)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
Dodge Rampage Exhaust Parts Categories
Helping You Find the Right Exhaust Parts for Your Dodge Rampage
You love your Rampage. So we’ve made it easier than ever to help you find Dodge Rampage Exhaust Parts in our online catalog. Our inventory holds 13 aftermarket and OEM Exhaust Parts for your Dodge Rampage, ranging from $2.99 to $1,214.00.
We offer parts from 5 brands trusted to make quality Exhaust Parts for your Dodge Rampage. Before you buy, take some time to read through customer reviews. We currently have 33 reviews of Dodge Rampage Exhaust Parts from previous customers. Some of the top rated parts include Manifold Bolt and Spring Kit – M8-1.25 x 76mm with 5.0 stars.
Find your Rampage Exhaust Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Rampage part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Exhaust Parts Brands for Your Dodge Rampage
Our inventory holds Exhaust Parts for your Dodge Rampage from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like Walker, Flowtech, and Dorman, all of which can keep that Dodge happy.
We have Walker parts available for your Dodge Rampage in categories like Catalytic Converters and Exhaust Manifold and Headers. Some of the top-rated Walker parts in these categories are:
from
$131.99
(1)
Standard EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID)
Catalytic Converters
Top-Rated Flowtech Exhaust Parts
Leading Flowtech Exhaust Parts
We carry Flowtech brand parts for your Dodge Rampage across several catalog categories, including Exhaust Tips. Some of our most reviewed Flowtech parts include:
FAQs for Dodge Rampage Exhaust Parts
What are the most purchased Exhaust Parts for the Dodge Rampage?
Out of 13 Exhaust Parts for the Dodge Rampage, the most popular in our inventory are:
from
$83.99
This product is not rated
Standard EPA Universal Catalytic Converter – 2" Inlet (ID) 2" Outlet (ID)
Catalytic Converters
What are the top-rated Dodge Rampage Exhaust Parts?
Top-rated Exhaust Parts for your Dodge Rampage based on customer reviews/ratings are:
from
$14.49
(1)
Manifold Bolt and Spring Kit – M8-1.25 x 76mm
“Wow my car is quiet again. The old springs were shot and the pipe didn’t fit the manifold correctly and you could hear the exhaust leak. These and a ”
