Dodge Dart Drivetrains

Please Select your Vehicle to See Exact Fit Parts

Essential Dodge Dart Drivetrains

USA Standard Gear – Powr Lok Posi For Chrysler 8.75", Aggressive Design (Part No.59026)

Powr Lok Posi For Chrysler 8.75", Aggressive Design

from

$919.99
Yukon yoke for Ford 8.8″ truck or passenger with a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 8.8″
  • 30 spline
  • 1330 u-joint size
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More

USA Standard Gear – Spartan Locker for Dana 60 Differential with 35 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17004)

Spartan Locker for Dana 60 Differential with 35 Spline Axles, Includes Heavy-duty Cross Pin Shaft

from

$829.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Dana Spicer 60 with 35 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Carrier Installation Kit For Dana 60 Differential (Part No.57005)

Carrier Installation Kit For Dana 60 Differential

from

$194.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 60
  • Includes carrier bearings and races and carrier shim kit
See More

Carquest Premium – CV Axle Assembly (Part No.NCV12132)

CV Axle Assembly

from

$198.99
Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

National – Multi-Purpose Bearing (Part No.307-L)

Multi-Purpose Bearing

from

$43.99
Product Features:
  • BUILT TO LAST: Advanced heat treatment process for strength
  • PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
  • RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
  • COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Schaeffler – Bearing – TRB (Tapered Roller Bearing) (Part No.KT4)

Bearing - TRB (Tapered Roller Bearing)

from

$16.49
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

Yukon Gear – 7.25" & 8.25" Chrysler Pinion Seal (Part No.30189)

7.25" & 8.25" Chrysler Pinion Seal

from

$16.99
7.25″ & 8.25″ Chrysler pinion seal.Yukon Mighty seal.

Product Features:
  • Pinion seal
  • Fits Chrysler 7.25″ and 8.25″
See More

Powertrax – Grip LS Traction System (Part No.LS308229)

Grip LS Traction System

from

$505.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

National – Manual Transmission Input Shaft Seal (Part No.9376)

Manual Transmission Input Shaft Seal

from

$7.29
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; single-lip
  • Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Replacement Baffle For Dana 60 & Dana 70-U

from

$6.99
Product Features:
  • Oil baffle for Dana Spicer 60 and Dana Spicer 70U
See More

Schaeffler – Shaft Seal (Part No.SS2698)

Shaft Seal

from

$6.29
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

Yukon Gear – Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7290 U/Joint Size (Part No.41008)

Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7290 U/Joint Size

from

$246.99
Yukon yoke for Chrysler 8.75″ with 10 spline pinion and a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. This yoke uses straps. OEM design. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 8.75″
  • 10 spline
  • 7290 u-joint size
  • Inside snap ring design
  • 2.625″ snap ring span
  • 1.125″ cap diameter
  • Strap style
See More

Yukon Gear – Dana 60 Semi-Float C-Clip (Part No.33247)

Dana 60 Semi-Float C-Clip

from

$14.99
Dana 60 semi-float C-clip.

Product Features:
  • C-clip
  • Fits Dana Spicer 60
See More

Schaeffler – Bearing – TRB (Tapered Roller Bearing) (Part No.KT36)

Bearing - TRB (Tapered Roller Bearing)

from

$34.49
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

Yukon Gear – Minor Install Kit For Chrysler 7.25" Differential (Part No.12001)

Minor Install Kit For Chrysler 7.25" Differential

from

$40.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Chrysler 7.25″ rear
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Driveworks – Universal Joint (Part No.DW-316)

Universal Joint

from

$31.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Yukon Gear – Differential (Part No.26039)

Differential

from

$869.99
Differential

Schaeffler – Bearing – CRB (Cylindrical Roller Bearing) (Part No.FC67148.5)

Bearing - CRB (Cylindrical Roller Bearing)

from

$10.79
We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.75ERMK)

Differential Master Bearing Kit - Koyo

from

$148.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • CHRYSLER 8 3/4 EARLY 742 CASTING SURE GRIP AND POWER LOCK ONLY
See More

USA Standard Gear – Ring/Pinion Sets (Part No.36349)

Ring/Pinion Sets

from

$404.99
Ring/Pinion Sets

Felpro – Drive Axle Shaft Flange Gasket 5 Bolt Hole Gasket, 2.922 Inch Inside Diameter, 4.281 Inch Outside Diameter (Part No.55032)

Drive Axle Shaft Flange Gasket 5 Bolt Hole Gasket, 2.922 Inch Inside Diameter,  4.281 Inch Outside Diameter

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25"

from

$15.99
Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:
  • Side adjuster lock bolt
  • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
See More

Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)

1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit

from

$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.

Product Features:
  • u-joint u-bolt kit
  • Fits 1350 and 1410 u-joint size
  • Includes two u-bolts and four nuts
See More

Dodge Dart Drivetrains Categories

Helping You Find the Right Drivetrains for Your Dodge Dart

You love your Dart. So we’ve made it easier than ever to help you find Dodge Dart Drivetrains in our online catalog. Our inventory holds 469 aftermarket and OEM Drivetrains for your Dodge Dart, ranging from $2.79 to $1,566.99.

We offer parts from 19 brands trusted to make quality Drivetrains for your Dodge Dart. Before you buy, take some time to read through customer reviews. We currently have 32,965 reviews of Dodge Dart Drivetrains from previous customers. Some of the top rated parts include Axle Housing Cover Gasket: Oval Shaped 10 Bolt Hole Gasket with 4.4 stars and Bearing with 5.0 stars.

Find your Dart Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge Dart part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your Dodge Dart

Our inventory holds Drivetrains for your Dodge Dart from 19 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, National, and Yukon Gear, all of which can keep that Dodge happy.

FAQs for Dodge Dart Drivetrains

What are the most purchased Drivetrains for the Dodge Dart?

Out of 469 Drivetrains for the Dodge Dart, the most popular in our inventory are:
Multi-Purpose Seal
from $11.99
(19)
Multi-Purpose Seal
Axle Shaft Seals
Multi-Purpose Bearing
from $16.99
(25)
Multi-Purpose Bearing
Differential Bearings
Taper Bearing Cone
from $15.49
(5)
Taper Bearing Cone
Differential Bearings

What are the top-rated Dodge Dart Drivetrains?

Top-rated Drivetrains for your Dodge Dart based on customer reviews/ratings are:
Axle Housing Cover Gasket: Oval Shaped 10 Bolt Hole Gasket
from $8.29
(21)
Axle Housing Cover Gasket: Oval Shaped 10 Bolt Hole Gasket
“I always use Fel-Pro gaskets they’re the best, but this gasket to replace the differential gasket on my son’s Jeep when I did a fluid change work and ”
Bearing
from $15.99
(9)
Bearing
“as advertised”
Multi-Purpose Bearing
from $17.99
(7)
Multi-Purpose Bearing
“Comparable with the Timkens I removed. NATIONAL bearings have lasted decades in many of my other machines.”