Dodge D100 Pickup Cooling and Climate Controls
Top Dodge D100 Pickup Cooling and Climate Controls Categories
We carry over 105 Cooling and Climate Controls in inventory for the Dodge D100 Pickup. If you’re looking for aftermarket Cooling and Climate Controls for your Dodge D100 Pickup, check out all these categories:
Essential Dodge D100 Pickup Cooling and Climate Controls
Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38844)
from
$34.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- Precision machined ports
Felpro – Engine Water Pump Gasket (Part No.6584)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Carquest Premium – Standard Thermostat: With Seal, 180 Degrees (Part No.13928)
from
$11.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Dorman – Coolant Housing/Water Outlet: With Housing, 90 Degree Neck Angle (Part No.902-3012)
from
$10.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
Imperial – Adjustable Thermostatic Fan Control (Part No.226203)
from
$22.99
Adjustable Thermostatic Fan Control; Economy Model; 32-248°F. Controls the operating temperature of Imperial electric fans
Product Features:
See More
Product Features:
- Economy adjustable thermostatic fan control
- Economy Model; 32-248°F
- For use with Imperial electric fans
- Probe installs into radiator fins
Carquest Premium – Radiator Cap: 4 PSI (Part No.10308)
from
$8.29
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Universal Standard Rotation Thermal Heavy Duty Fan Clutch (Part No.216087)
from
$125.99
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
National – Bearings (Part No.5206-DD)
from
$52.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Help – Drain Cock-Brass-1/4 In. NPT (Part No.61106)
from
$5.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.
Product Features:
See More
Product Features:
- Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
- Durable construction – this part is made of quality materials for a long service life
- Saves money – offers original equipment quality at a competitive price
- Quality assured – this petcock has undergone virtual testing to assure proper fit and function
Motorad – Thermostat Kit: Includes Housing, Thermostat and Gasket, 195 Degrees (Part No.4830KT)
from
$14.79
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Blower Motor: Without Wheel (Part No.35555)
from
$48.49
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)
from
$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Carquest Premium – Manual Shut-off Valve (Part No.T84703)
from
$22.99
Manual Shut-off Valve
Factory Air – Carbon Shaft Seal Kit (Part No.24021)
from
$26.99
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Felpro – Engine Water Pump Gasket (Part No.11730)
from
$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Factory Air – Green Round O-Ring (Part No.24608)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84830)
from
$14.29
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.
Product Features:
See More
Product Features:
- Meets and/or exceeds OEM standard
- Includes quality gasket or O-ring to ensure proper seal (where applicable)
- Coated with corrosion and rust inhibitor
- 100% leak tested
- Direct-fit replacement for ease of installation
Factory Air – Compressor Suction Port Gasket (Part No.24137)
from
$1.49
Steel construction; Compatible with R12 And R134A; High quality construction; Oil resistant; Universal applications
See More
Carquest Premium – A/C Filter Drier (Part No.T33259)
from
$35.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35602)
from
$19.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Galvanized steel construction
- Meets all requirements of international standard ISO 140
- Suitable for a wide variety of applications
- Set screw installation
Permatex – Ultra Grey RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
National – Bearings (Part No.205)
from
$20.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dodge D100 Pickup Cooling and Climate Controls Categories
Helping You Find the Right Cooling and Climate Controls for Your Dodge D100 Pickup
You love your D100 Pickup. So we’ve made it easier than ever to help you find Dodge D100 Pickup Cooling and Climate Controls in our online catalog. Our inventory holds 105 aftermarket and OEM Cooling and Climate Controls for your Dodge D100 Pickup, ranging from $0.99 to $569.99.
We offer parts from 13 brands trusted to make quality Cooling and Climate Controls for your Dodge D100 Pickup. Before you buy, take some time to read through customer reviews. We currently have 52,984 reviews of Dodge D100 Pickup Cooling and Climate Controls from previous customers. Some of the top rated parts include Radiator Cap: 13 PSI with 4.5 stars and Radiator Cap: 13 PSI with 4.8 stars.
Find your D100 Pickup Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge D100 Pickup part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Cooling and Climate Controls Brands for Your Dodge D100 Pickup
Our inventory holds Cooling and Climate Controls for your Dodge D100 Pickup from 13 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Permatex, and Motorad UltraStats, all of which can keep that Dodge happy.
We have Felpro parts available for your Dodge D100 Pickup in categories like Engine Cooling Parts. Some of the top-rated Felpro parts in these categories are:
Top-Rated Carquest Premium Cooling and Climate Controls
Leading Carquest Premium Cooling and Climate Controls
We carry Carquest Premium brand parts for your Dodge D100 Pickup across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Carquest Premium parts include:
FAQs for Dodge D100 Pickup Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the Dodge D100 Pickup?
Out of 105 Cooling and Climate Controls for the Dodge D100 Pickup, the most popular in our inventory are:
What are the top-rated Dodge D100 Pickup Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your Dodge D100 Pickup based on customer reviews/ratings are:
from
$9.79
(51)
Radiator Cap: 13 PSI
“It’s a radiator cap, it keeps the coolant in the radiator under pressure. Works as it should”
