Dodge Charger TPMS Sensors

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.

Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.

Product Features:

• Schrader Programmable EZ-sensor with Metal Valve Stem – Must be Programmed to Specific M/M/Y Vehicle
• Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
• Easy to program and covers the majority of vehicles on the road in North America
• Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
• Sensor comes fully assembled and ready to program and install
• Engineered and manufactured to OEM design and quality specifcations
• Future-proofed OE quality TPMS product supports new and pending OE technologies
• Aluminum valve can be replaced by Schrader clamp-in valve kit 29049
• Aluminum valve can be replaced by Schrader service kit 20049
• Nut Torque = 71 in-lbs
• Valve Core Torque = 3.5 in-lbs

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

• Includes 4 Rubber Press-in Valve Stems
• Compatible with Autel 1-Sensors
• Compatible with Autel 315MHz & 433MHz MX-Sensors
• Warranty on Material and Workmanship
• High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz & 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve.
• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• Combined Frequency – 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99 Percent of OE Sensors
• Maximum Signal Strength / Battery Reliability
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The MX-Sensor 1-SensorM Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-SensorM features a combined frequency of 315MHz & 433MHz with metal valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-SensorM is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve.
• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Product Features:

• Metal clamp-in stem.
• Works with most major TPMS Scan tools
• Reduces SKUs
• OE Designed and Validated
• Advance anodization of valve stems and hex nuts
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:

• Installs right out of the box
• No sensor programing required
• Works with all major TPMS scan tools
• No training required – designed to follow existing OE vehicle relearn procedures
• Faster TPMS scan tool hunt mode
• Reduces SKUs
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

Product Features:

• DIRECT REPLACEMENT: 1 for 1 replacement sensor
• QUICK AND EASY: TPMS sensors are ready out of the box
• VEHICLE FITMENT: Preprogrammed to the specific make, model, and year of a vehicle
• SCHRADER QUALITY: TPMS sensors are produced in Schraders secure and highly automated OE manufacturing facilities
• RELEARN PROCEDURE: A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Product Features:

• Installs right out of the box
• No sensor programing required
• Works with all major TPMS scan tools
• No training required – designed to follow existing OE vehicle relearn procedures
• Faster TPMS scan tool hunt mode
• Reduces SKUs
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
• Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
• Combined Frequency 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Maximum Signal Strength / Battery Reliability
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com. For more information about Schrader and its products visit: www.SchraderTPMS.com.

Product Features:

• Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
• Replacement TPMS Sensor for OE No. 68487472AA, 684874725AB
• Valve can be replaced by Schrader aluminum valve kit 20049
• Valve Core Torque = 3.5 in-lbs (0.4 Nm)
• Nut Torque = 71 in-lbs (8 Nm)
• Always maintain your TPMS scan tool to it’s latest software update
• Schrader S56 is an all-in-one TPMS tool with coverage for domestic and import
• Advanced features and functions provide complete TPMS management.
• Frequent updates include all new TPMS sensors and vehicles, immediately when introduced each year
• Select make, model, year via VIN scan
• Comprehensive make, model, year specific relearn procedures

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

• Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
• Sensor must be programmed to specifi Y/M/M vehicle
• Compatible with most programming tools
• Make sure that your TPMS programming tool is updated to it’s latest version
• Combines 314.9, 315 & 433 MHz application into one sensor
• Future proofed to support new and pending OE system technologies
• Optimizes inventory levels and returns
• Reduces overal cost and increases speed of service
• Use service kit 20018 to replace the rubber valve assembly
• Valve Core Torque = 3.5 in-lbs (0.4 Nm)
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The CV-003 is a chrome metal press-in valve stem for the 1-Sensor. It comes with a warranty on material and workmanship.

Product Features:

• Chrome Grey Metal Press-in Valve Stem
• Compatible with Autel 1-Sensor
• Warranty on Material and Workmanship

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• 100% ID clone-able with no relearn required
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor├é family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

• Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
• Sensor must be programmed to specific Y/M/M vehicle
• Compatible with most programming tools
• Make sure that your TPMS programming tool is updated to it’s latest version
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors
• Combines 314.9, 315 & 433 MHz application into one sensor
• Future proofed to support new and pending OE system technologies
• Optimizes inventory levels and returns
• Reduces overal cost and increases speed of service
• Use service kit 20018 to replace the rubber valve assembly
• Valve Core Torque = 3.5 in-lbs (0.4 Nm)
• Professional installation is strongly suggested

Ball-seat valve stem assembly with internal shear ring.

Product Features:

• 43mm
• Rim Hole Compatibility: 0.453″
• 200 PSI maximum cold inflation pressure

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

Product Features:

• OE – validated part identical to the dealer
• Electroless nickel-plated valve cores
• Advanced anodization of valve stems and hex nuts
• Includes torque specifications and installation instructions
• TPMS service kits are required whenever performing tire replacement or service
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

• Black anodized clamp-in stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
• 0.453″ rim hole compatibility
• 200 PSI maximum cold inflation pressure

Tpms Snap In Valve – Ford

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Crown Automotive Is The Premiere Manufacturer And Distributor Of Quality Replacement Parts
• Hazardous Free Material
• Offers OE Fit And Function
• Easy To Install

Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.

Product Features:

• TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
• 0.453″ rim hole compatiblity
• 200 PSI maximum cold inflation pressure

Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.

Product Features:

• DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
• DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
• SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
• VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
• PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Manufactured From High Quality Material
• Engineered To The Specifications
• Meets The Quality Standards
• Designed For Performance And Durability
• Easy To Install