Dodge B350 Performance and Racing Products

Essential Dodge B350 Performance and Racing Products

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1432)

Exhaust Manifold Gasket Set

from

$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

B & M – Torque Converter, Holeshot 3000 (Part No.10425)

Torque Converter, Holeshot 3000

from

$879.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)

Intake Manifold Bolt Set - Chevrolet Small Block - Socket Head 3/8"-16 X 1" Bolts & Washers

from

$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers

Product Features:
  • Zinc plated to resist corrosion and provide a clean professional appearance
  • Made from Grade 5 steel for strength and durability
  • Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
  • Allen (socket) Head
  • Zinc Plated For Protection
See More

B & M – Automatic Shifter, Hammer Shifter, Universal (Part No.80885)

Automatic Shifter, Hammer Shifter, Universal

from

$339.99
The Hammer shifter may just be the most comfortable and versatile shifter available. The unique design of the shift handle easily fits all sizes of hands providing the appropriate wrist angle and feel when shifting. The multi-position lockout trigger is s

Product Features:
  • Ratchet Action Shifter
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
  • Reverse Lockout Feature
See More

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

from

$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3757901)

Unilite Electronic Ignition Distributor Series 37

from

$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1806)

PERFORMANCE OIL PAN GASKET SET

from

$21.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Powertrax – No-Slip Traction System (Part No.9203822705)

No-Slip Traction System

from

$527.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Edelbrock – Water Pump Chrysler 1969-85 318/ 360 in Polished Finish (Part No.8887)

    Water Pump Chrysler 1969-85 318/ 360 in Polished Finish

    from

    $426.99
    Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in

    Product Features:
    • Maximum Cooling for Street and Racing Engines
    • Internal Passages Are Balanced for Maximum Flow
    • Impeller is Larger than Others For Max Pressure
    • Impeller Vanes Dramatically Increase Flow Rates
    • Equal Distribution to Both Sides of Block
    • Only Flows in One-Direction for Optimum Efficiency
    See More

    MSD Ignition – Tach Adapter (Part No.8910)

    Tach Adapter

    from

    $91.99
    In some instances when you install an MSD ignition, the factory ECU may not be able to distinguish when the coil fires. This is the signal that is also responsible for firing the injectors (or the tachometer), which may cause a no-run situation. The dual channel ignition adapter simulates the original coil trigger signal thus allowing the ECU to properly trigger both the tach and fuel injection with the MSD DIS ignition installed. In most cases, the adapter plugs directly into the MSD’s harness. For vehicles using an MSD DIS-2 ignition, only one PN 8912 is required. For DIS-4 applications, two PN 8912’s are required.

    Product Features:
    • Designed for non-current limiting ignitions
    • Size Non-Current Limiting Ignitions
    • Easy mounting and installation
    • Simulates the coil signal
    See More

    Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

    Brake Bleeder Screws

    from

    $40.99
    Brake Bleeder Screws

    Edelbrock – Torker II 340/360 Small Block Chrysler Intake Manifold (Part No.5076)

    Torker II 340/360 Small Block Chrysler Intake Manifold

    from

    $425.99
    2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. Can be used on 318 cid if 340/360 heads used. Available in cast or polished.

    Product Features:
    • 2500 to 6500 RPM High Performance Street Engines
    • Single-Plane Low-Rise Intake Good for High RPM
    • Ideal for Applications with Limited Hood Clearance
    • For Top-End HP and Adequate Throttle Response
    • Not for Mileage or Emissions Applications
    • Can be Used on 318 cid if 340/360 Heads Used
    See More

    Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    Rancho – RS5000 Steering Damper (Part No.RS5403)

    RS5000 Steering Damper

    from

    $78.99
    Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.

    Product Features:
    • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
    • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
    • ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
    • HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
    See More

    Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1350-8759)

    Drive Shaft Pinion Yoke

    from

    $254.99


    Product Features:
    • BILLET HP 1350-29 SPLINE YOKE
    See More

    Edelbrock – Intake Manifold Gasket for 1966-87 318-340-360 Chrysler engines (Part No.7276)

    Intake Manifold Gasket for 1966-87 318-340-360 Chrysler engines

    from

    $28.99
    Product Features:
    • Clean Positive Seal
    • Embossed Silicone Bead Surrounding The Port
    • Matched To Manifolds And Cylinder Heads
    See More

    Edelbrock – Cylinder Head Gasket Set for Chrysler (Part No.7326)

    Cylinder Head Gasket Set for Chrysler

    from

    $61.99
    Product Features:
    • Cylinder Head Gasket
    • 1966-1987 318-340-360
    See More

    Richmond Gear – Differential Ring And Pinion (Part No.69-0054-1)

    Differential Ring And Pinion

    from

    $369.99
    Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

    Product Features:
    • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
    • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
    • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
    • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
    • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
    See More

    Holley – Mechanical Fuel Pump Mounting Pad Cover (Part No.12-813)

    Mechanical Fuel Pump Mounting Pad Cover

    from

    $17.79
    Fuel pump mounting pad cover is used to cover the hole in the block when the mechanical fuel pump is removed to use an electric pump.

    Product Features:
    • Mechanical Fuel Pump Mounting Pad Cover For Chrysler V-8ft.S
    See More

    Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-222-3)

    Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit

    from

    $378.99
    Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

    Product Features:
    • Excellent performance in street carbureted applications.
    • More vacuum allows an increase in duration for improved performance and assists power brakes.
    • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
    • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
    See More

    Accel – Tst Dodge92-98 5.2L 93-99 5.9L (Part No.TST11)

    Tst Dodge92-98 5.2L 93-99 5.9L

    from

    $224.99
    Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

    Product Features:
    • Complete Super Tune Kit
    • 8mm Spiral Core Wires
    • Accel Classic Core Plugs
    • High Performance Cap And Rotor
    • Reduced Emissions
    See More

    Energy Suspension – Control Arm Bushing Set (Part No.5.3110R)

    Control Arm Bushing Set

    from

    $65.99
    For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

    Product Features:
    • Maintains Better Alignment While Driving
    • Full Floating and Non Binding
    • Fits Into the Remaining Stock Control Arms
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

    Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

    from

    $17.99
    K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

    Product Features:
    • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
    • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
    • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
    • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
    • EASY TO REMOVE: Fast and easy Wrench-Off removal
    • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
    • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
    See More

    Accel – Dist Cap:Dodge/Jeep Magnum V8 (Part No.120329)

    Dist Cap:Dodge/Jeep Magnum V8

    from

    $30.19
    ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.

    Product Features:
    • Performance replacement
    • Heavy duty for maximum energy transfer
    See More

    Helping You Find the Right Performance and Racing Products for Your Dodge B350

    You love your B350. So we’ve made it easier than ever to help you find Dodge B350 Performance and Racing Products in our online catalog. Our inventory holds 80 aftermarket and OEM Performance and Racing Products for your Dodge B350, ranging from $17.49 to $1,093.99.

    We offer parts from 19 brands trusted to make quality Performance and Racing Products for your Dodge B350. Before you buy, take some time to read through customer reviews. We currently have 15,436 reviews of Dodge B350 Performance and Racing Products from previous customers. Some of the top rated parts include Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars and High-Performance Ignition Coil – Direct OE Fit with 3.9 stars.

    Find your B350 Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge B350 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

    Top Performance and Racing Products Brands for Your Dodge B350

    Our inventory holds Performance and Racing Products for your Dodge B350 from 19 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Mr. Gasket, and Edelbrock, all of which can keep that Dodge happy.
    We have Mallory parts available for your Dodge B350 in categories like Performance Ignition Products. Some of the top-rated Mallory parts in these categories are:
    Unilite Ignition Module
    from $85.29
    (3)
    Unilite Ignition Module
    Performance Ignition Parts

    FAQs for Dodge B350 Performance and Racing Products

    What are the most purchased Performance and Racing Products for the Dodge B350?

    Out of 80 Performance and Racing Products for the Dodge B350, the most popular in our inventory are:
    High Performance 180 Degree Thermostat for Increased Flow
    from $26.99
    (20)
    High Performance 180 Degree Thermostat for Increased Flow
    Performance Engine Coolant Thermostats

    What are the top-rated Dodge B350 Performance and Racing Products?

    Top-rated Performance and Racing Products for your Dodge B350 based on customer reviews/ratings are:
    Blaster 2 Coil: High Performance Ignition Upgrade
    from $49.99
    (20)
    Blaster 2 Coil: High Performance Ignition Upgrade
    “Had one before and blew it up, good easy replacement. MSD makes a good product.”
    High-Performance Ignition Coil - Direct OE Fit
    from $72.39
    (18)
    High-Performance Ignition Coil – Direct OE Fit
    “Great coil for my 5.9 magnum block noticed a big difference in performance!!”
    Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
    from $451.99
    (7)
    Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
    “Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was tu”