Dodge B300 Drivetrains

Please Select your Vehicle to See Exact Fit Parts

Essential Dodge B300 Drivetrains

Yukon Gear – Master Overhaul Kit For ’00 & Down Chrysler 9.25" Rear Differential (Part No.14012)

Master Overhaul Kit For '00 & Down Chrysler 9.25" Rear Differential

from

$314.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits 2000 and down Chrysler 9.25″ rear
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
See More

Yukon Gear – Dana 60 & Dana 70 Power Lok Clutch Set (Steel & Fiber) (Part No.16155)

Dana 60 & Dana 70 Power Lok Clutch Set (Steel & Fiber)

from

$181.99
Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).

Product Features:
  • Clutch kit
  • Fit Dana Spicer 60, 70, 70U and 70HD Powr Lok positraction
See More

Yukon Gear – 1330 U/Joint With Zerk Fitting (Part No.42002)

1330 U/Joint With Zerk Fitting

from

$51.99
Yukon 1330 U/Joint with zerk fitting. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More

National – Manual Transmission Input Shaft Seal (Part No.9376)

Manual Transmission Input Shaft Seal

from

$7.29
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; single-lip
  • Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Victor Reinz – Drive Axle Shaft Flange Gasket (Part No.71-13861-00)

Drive Axle Shaft Flange Gasket

from

$4.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Yukon Gear – Pinion Install Kit For Chrysler 9.25" Differential (Part No.13011)

Pinion Install Kit For Chrysler 9.25" Differential

from

$276.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Chrysler 9.25″ rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Pro-King – Differential Ring Gear Bolt (Part No.742G935)

Differential Ring Gear Bolt

from

$2.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • Meets or exceeds OE specifications
See More

Schaeffler – Bearing – CRB (Cylindrical Roller Bearing) (Part No.FC67148.5)

Bearing - CRB (Cylindrical Roller Bearing)

from

$10.79
We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:
  • High-precision and High-quality components used in all KITs
  • Coverage of classic and new high-tech solutions for the best system coverage
See More

Yukon Gear – Zip Locker For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.34022)

Zip Locker For Dana 60 With 35 Spline Axles, 4.10 & Down

from

$1487.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years. This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 35 spline axles
  • 4.10 and down ratio only
  • Forged case and 8620 internals for added strength
  • Works with a variety of air delivery systems
  • Assembled in the USA
See More

Yukon Gear – Set Up Bearing (Part No.56039)

Set Up Bearing

from

$276.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 60
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

Yukon Gear – Locking Key / Wedge For Dana 60 & 70 Spindle Nut (Part No.33512)

Locking Key / Wedge For Dana 60 & 70 Spindle Nut

from

$29.99
Product Features:
  • Locking key/wedge
  • Fits Dana Spicer 60 and 70
See More

National – Bearing Race (Part No.354A)

Bearing Race

from

$22.79
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:
  • PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION – Crowned raceways for even load distribution
  • OE-STYLE DESIGN – Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

National – Bearing Race (Part No.HM803110)

Bearing Race

from

$19.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:
  • PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION – Crowned raceways for even load distribution
  • OE-STYLE DESIGN – Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
See More

Needa Parts – Rubber Differential Plug Chrysler 2008-2000 (sold by each) (Part No.090-062)

Rubber Differential Plug Chrysler 2008-2000 (sold by each)

from

$10.99
This differential cover plug is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential cover plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – 9.25" Chrysler C/Clip (Part No.33075)

9.25" Chrysler C/Clip

from

$17.99
9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.

Product Features:
  • c-clip for Chrysler 9.25″ rear
  • 0.205″ thick
See More

Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)

3 Qt - Penzoil 80W90 Conventional Gear Oil

from

$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:
  • Includes three quarts of conventional oil
See More

Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

Seal Housing For Dana 60, Zip Locker, With O-Rings

from

$79.99
Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:
  • Seal housing for Dana Spicer 60
  • Includes o-rings
See More

Motive Gear – Differential Ring and Pinion (Part No.D60-456)

Differential Ring and Pinion

from

$266.99


Product Features:
  • DANA-60 R/P 4.56 STD MG (USES PRE-LOAD SHIMS)
See More

Yukon Gear – Grizzly Locker For Dana 60, 4.56 & Up, 40 Spline (Part No.28025)

Grizzly Locker For Dana 60, 4.56 & Up, 40 Spline

from

$1191.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This is a narrow case locker. If you have a wide housing, please order two DS 42563 with your locker. This locker is ABS compatible.

Product Features:
  • Fits Dana Spicer 60 with 40 spline axles
  • 4.56 and up ratio only
  • Patented internal design reduces common locker failures
  • 8620 internals for added strength
  • Assembled in the USA
See More

Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)

Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60

from

$232.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More

USA Standard Gear – Replacement Spider Gear Set For Dana 60, 30 Spline (Part No.39008)

Replacement Spider Gear Set For Dana 60, 30 Spline

from

$198.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 60, 30 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Dorman – Spindle Washer – I.D. 2 In.-3/8 In. O.D. 2-3/8 In. Thickness 1/16 In. (Part No.618-050.1)

Spindle Washer - I.D. 2 In.-3/8 In. O.D. 2-3/8 In. Thickness 1/16 In.

from

$6.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement

from

$8.99
Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
  • For Trac Loc positraction applications only
See More

Pro-King – Differential Internal Nest Kit (Part No.723A717)

Differential Internal Nest Kit

from

$159.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • Meets or exceeds OE specifications
See More

Dodge B300 Drivetrains Categories

Helping You Find the Right Drivetrains for Your Dodge B300

You love your B300. So we’ve made it easier than ever to help you find Dodge B300 Drivetrains in our online catalog. Our inventory holds 372 aftermarket and OEM Drivetrains for your Dodge B300, ranging from $2.29 to $1,566.99.

We offer parts from 18 brands trusted to make quality Drivetrains for your Dodge B300. Before you buy, take some time to read through customer reviews. We currently have 12,967 reviews of Dodge B300 Drivetrains from previous customers. Some of the top rated parts include Drive Shaft Center Support Bearing with 3.4 stars and Multi-Purpose Bearing with 4.4 stars.

Find your B300 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Dodge B300 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Drivetrains Brands for Your Dodge B300

Our inventory holds Drivetrains for your Dodge B300 from 18 trusted brands. You’ll find OEM and aftermarket parts from brands like National, Yukon Gear, and Driveworks, all of which can keep that Dodge happy.

Top-Rated Driveworks Drivetrains

Leading Driveworks Drivetrains

We carry Driveworks brand parts for your Dodge B300 across several catalog categories, including Drive Shafts and Axles and Universal Joints. Some of our most reviewed Driveworks parts include:
Oil Seal
from $6.99
(87)
Oil Seal
Axle Shaft Seals
Universal Joint
from $31.99
(3)
Universal Joint
U-Joints
Taper Bearing Cup
from $6.99
(3)
Taper Bearing Cup
Transfer Case Differential Bearings

FAQs for Dodge B300 Drivetrains

What are the most purchased Drivetrains for the Dodge B300?

Out of 372 Drivetrains for the Dodge B300, the most popular in our inventory are:
Multi-Purpose Seal
from $11.99
(19)
Multi-Purpose Seal
Axle Shaft Seals
Multi-Purpose Bearing
from $17.99
(36)
Multi-Purpose Bearing
Differential Bearings
Center Support Bearing Motor Mount: Center, 1 Piece
from $21.99
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings

What are the top-rated Dodge B300 Drivetrains?

Top-rated Drivetrains for your Dodge B300 based on customer reviews/ratings are:
Drive Shaft Center Support Bearing
from $44.99
(25)
Drive Shaft Center Support Bearing
“Good price and quality”
Multi-Purpose Bearing
from $17.99
(7)
Multi-Purpose Bearing
“Comparable with the Timkens I removed. NATIONAL bearings have lasted decades in many of my other machines.”
Differential Carrier Gear Kit
from $168.99
(6)
Differential Carrier Gear Kit
“Great customer service”