1977 Dodge B300 Drivetrains
More 1977 Dodge B300 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1977 Dodge B300, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1977 Dodge B300 Drivetrains
Motive Gear – Differential Carrier Gear Kit (Part No.C9.25BI)
Yukon Gear – Pinion Install Kit For Dana 70-U Differential (Part No.13035)
from
$349.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 70U
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Driveworks – Oil Seal (Part No.S-9316)
from
$3.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)
from
$8.99
Product Features:
See More
- Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
- For Trac Loc positraction applications only
Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)
from
$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
- 1/2″ x 18 thread
Motive Gear – Differential Ring and Pinion (Part No.D70-373)
Yukon Gear – 9.25" Chrysler C/Clip (Part No.33075)
from
$17.99
9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.
Product Features:
See More
Product Features:
- c-clip for Chrysler 9.25″ rear
- 0.205″ thick
Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)
from
$3.99
Product Features:
See More
- Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
Yukon Gear – Differential (Part No.26044)
from
$1119.99
Differential
Yukon Gear – Replacement Standard Carrier Case For Dana Spicer 60, 4.10 And Down (Part No.20030)
from
$299.99
Product Features:
See More
- Fits Dana Spicer 60
- 4.10 ratio and down only
- Fits standard open differentials only
Dorman – Rear Drive Shaft: Greaseable (Part No.976-886)
from
$829.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Victor Reinz – Drive Axle Shaft Flange Gasket (Part No.71-13861-00)
from
$3.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Yukon Gear – Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles (Part No.16088)
from
$659.99
Yukon replacement positraction internals for Dana 60 (full- and semi-floating) with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 60 with Trac Loc positraction with 35 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)
Pro-King – Clutch Pack (Part No.723A119)
from
$122.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
USA Standard Gear – Replacement Spider Gear Set For Dana 60, 35 Spline (Part No.39009)
from
$198.99
Product Features:
See More
- Spider gear kit
- Fits Dana Spicer 60, 35 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
National – Multi Purpose Seal (Part No.9376)
from
$7.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Bearings (Part No.15101)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 1410 U/Joint With Zerk Fitting (Part No.42009)
from
$61.99
Yukon 1410 U/Joint with zerk fitting. 4.188″ snap ring span, 1.118″ cap diameter. Outside snap ring.
See More
Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)
from
$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Redi-Sleeve yoke saver
- Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
Richmond Gear – RngPnnInstlKt (Part No.83-1034-B)
from
$59.99
RngPnnInstlKt
Yukon Gear – Chrome Replacement Cover For Dana 60 And 61 Standard Rotation (Part No.32005)
from
$89.99
Chrome replacement cover for Dana 60 and 61(not reverse rotation!).
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 60
- Chrome
Yukon Gear – Set Up Bearing (Part No.56039)
from
$276.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 60
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Driveworks – Tapered Roller Bearing (Part No.S-HM-803146)
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size (Part No.41027)
from
$219.99
Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1350 u-joint size
- 3.625″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS (Part No.33477)
from
$10.99
Spindle nut retainer for Dana 60 & 70, 1.830″ I.D., 10 outer tabs. This replaces Spicer part number 30637.
Product Features:
See More
Product Features:
- Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
- 1.830″ I.D.
- 10 outer tabs
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Popular 1977 Dodge B300 Drivetrains Categories
1977 Dodge B300 Drivetrains
You count on your 1977 Dodge B300 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 351 Drivetrains ranging in price from $1.99 to $1,487.99, you’re sure to find everything you need for your 1977 Dodge B300.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like National, Yukon Gear, and Anchor. 1977 Dodge B300 Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,358 extensive product reviews on 1977 Dodge B300 Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 4.5 stars and Differential Carrier Gear Kit with 3.7 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1977 Dodge B300 below to get started!
Top-Rated Drivetrains Brands For Your 1977 Dodge B300
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1977 Dodge B300 running right for years to come. In our inventory you’ll find brands like National, Yukon Gear, Anchor, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Spindles. All are waiting to get your 1977 Dodge B300 back on the road. Some of the top-rated Dorman products in these categories are:
from
$4.99
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
Spindle Retainers
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1977 Dodge B300, and some of our most reviewed National parts include:
FAQs for 1977 Dodge B300 Drivetrains
What are the most purchased Drivetrains for the 1977 Dodge B300?
Out of 351 Drivetrains for the 1977 Dodge B300, the most popular in our inventory are:
What are the top-rated 1977 Dodge B300 Drivetrains?
Top-rated Drivetrains for your 1977 Dodge B300 based on customer reviews/ratings are:
