Chrysler Cirrus Steering and Chassis Parts
Top Chrysler Cirrus Steering and Chassis Parts Categories
We carry over 86 Steering and Chassis Parts in inventory for the Chrysler Cirrus. If you’re looking for aftermarket Steering and Chassis Parts for your Chrysler Cirrus, check out all these categories:
Essential Chrysler Cirrus Steering and Chassis Parts
Carquest Premium – Bulk Return Hose (Part No.36288)
from
$44.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Powercraft – Lower Pinion Bearing Kit (Part No.8579)
from
$43.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Control Arm Front Upper Right (Part No.520-370)
from
$61.99
Rigorously tested by a team of product and quality engineers, our Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride.
Product Features:
See More
Product Features:
- Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
Carquest Premium – Power Steering Pressure Switch (Part No.PSA1023)
from
$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)
from
$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Cardone – Power Steering Pump (Part No.20-902)
from
$128.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Dorman – Power Steering Pump Pulley (Part No.300-311)
from
$23.49
This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
- Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
MOOG – Rack & Pinion Bellows Kit (Part No.K6301)
from
$28.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
MOOG – Tie Rod End (Part No.EV323)
from
$64.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Assembled in the USA
- TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening
Carquest Premium – Pressure Hose Assembly (Part No.36326)
from
$171.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
MOOG – Stabilizer Bar Link (Part No.K7306)
from
$51.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
MOOG – Ball Joint (Part No.K7218)
from
$59.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Cardone – Rack and Pinion Assembly (Part No.22-331)
from
$201.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Rare Parts – Sway Bar Fr Bush (Part No.RP15337)
from
$20.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Driveworks – Steering Tie Rod End (Part No.DW-EV323)
from
$23.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
MOOG – Suspension Stabilizer Bar Link Kit (Part No.K90308)
from
$6.79
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet dependable operation
- NASCAR-proven performance
- Provides like-new steering ease of installation and longer life
- Incorporates proven design and engineering features
Driveworks – Suspension Stabilizer Bar Link Kit (Part No.DW-K7306)
from
$42.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot with grease relief valve keeps contaminants out
- Performance tested to ensure durability
Powercraft – Rack Pinion Seal Kit (Part No.8610)
from
$36.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.8824)
from
$27.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.8970)
from
$39.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
MOOG – Strut Rod Bushing (Part No.K7426)
from
$24.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Chrysler Cirrus Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Chrysler Cirrus
You love your Cirrus. So we’ve made it easier than ever to help you find Chrysler Cirrus Steering and Chassis Parts in our online catalog. Our inventory holds 86 aftermarket and OEM Steering and Chassis Parts for your Chrysler Cirrus, ranging from $2.99 to $246.99.
We offer parts from 14 brands trusted to make quality Steering and Chassis Parts for your Chrysler Cirrus. Before you buy, take some time to read through customer reviews. We currently have 7,380 reviews of Chrysler Cirrus Steering and Chassis Parts from previous customers. Some of the top rated parts include Pressure Hose Assembly with 4.3 stars and Suspension Control Arm and Ball Joint Assembly with 4.8 stars.
Find your Cirrus Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chrysler Cirrus part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Chrysler Cirrus
Our inventory holds Steering and Chassis Parts for your Chrysler Cirrus from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Carquest Premium, and Cardone, all of which can keep that Chrysler happy.
We have MOOG parts available for your Chrysler Cirrus in categories like Ball Joints. Some of the top-rated MOOG parts in these categories are:
Top-Rated Imperial Steering and Chassis Parts
Leading Imperial Steering and Chassis Parts
We carry Imperial brand parts for your Chrysler Cirrus across several catalog categories, including Power Steering Parts. Some of our most reviewed Imperial parts include:
FAQs for Chrysler Cirrus Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Chrysler Cirrus?
Out of 86 Steering and Chassis Parts for the Chrysler Cirrus, the most popular in our inventory are:
from
$7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
from
$2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses
What are the top-rated Chrysler Cirrus Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Chrysler Cirrus based on customer reviews/ratings are:
from
$62.99
(56)
Pressure Hose Assembly
“worded great had no issues. It was as described with correct size fittings and factory bends where they needed them. I had a hole in my line that runs”
from
$165.99
(20)
Suspension Control Arm and Ball Joint Assembly
“Just buy it. It is worth the extra money in the long run!”
from
$124.99
(19)
Suspension Control Arm and Ball Joint Assembly
“99 Chrysler cirrus. Did the job on both sides of the vehicle in my driveway in a few hours and barely had to use my trucker mouth. Quality part meets ”
