from

$9.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$46.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$21.79

ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$41.49

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$14.99

Chrome Finish

Product Features:

Edelbrock part No. 4802 hold-down distributor clamp is for 4.3L V6, small-block V8 and big-block V8 Chevys. It is constructed of die-cast zinc with a chrome finish. Kit includes stud, nut and a washer.
Includes stud, nut, & washer

from

$59.99

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

7mm Yellow Silicone Jacket
Street-driven Applications
Copper Core
Orange Spark Plug Boots
Pre HEI Vehicles
Universal Wire Set

from

$306.99

Our Chevrolet front drive distributors brought the need for a distributor plug. Both are billet aluminum and feature a slip collar to ensure correct installation depth.

Product Features:

Use On Engines w/Wet Sump Oil System And Front Drive Dist.
Supplied w/Bronze Gear
Must Be Used w/An MSD Crank Trigger
Adj. slip collar mounting flange for engines w/modified deck hts.
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear
QPQ coated polished steel shaft; guided by sealed ball bearings
Oversized Polished Steel Shaft w/QPQ Coating

from

$152.99

Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:

Easy Installation
Improved Fuel Economy
Reduced Maintenance
Accurate Timing
Improved Performance
Provides A Simple Conversion
No Moving Parts To Wear Out

from

$45.99

Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors. High dielectric strength cap with male or female brass terminals with premium rotor with brass contact.

Product Features:

PerTronix D600700 Cap Black and Rotor 8 cylinder Flame-Thrower Billet Distributor
Replacement distributor cap and rotor for Flame-Thrower billet and cast distributors

from

$40.99

Parts and accessories for Flame-Thrower Billet Distributors offer unmatched quality and accommodate the performance levels your distributor was engineered for.

Product Features:

Replacement Part (only) for PerTronix Flame Thrower Distributors
Replacement Part (only) for PerTronix Flame Thrower Distributors

from

$7.99

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles
Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
Durable construction – made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$25.99

The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$90.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$562.99

This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. Trigger signals are produced via a high-output magnetic pick-up. This pickup is extremely accurate and never requires adjustment. Since this distributor is designed primarily for race engines, an oversized ( . 006 In.) bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds.

Product Features:

Includes built-in Rev Limiter

from

$488.99

Distributors

from

$60.99

Edelbrock part No. 22737 is a bronze alloy drive gear for use on ProFlo EFI & Max-Fire distributor in small-block & big-block Chevrolet engines.

from

$3.99

Autolite Copper spark plugs are designed to provide reliable performance and long-lasting durability for your vehicle. Featuring a copper core center electrode, these plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes enhance longevity, while the high alumina multi-rib ceramic insulator boosts thermal conductivity and insulation strength. A nickel-plated shell offers superior corrosion resistance, making these plugs a durable choice for extended use. Engineered for optimal fuel combustion, they contribute to improved fuel efficiency, helping you save at the pump. Additionally, their advanced design ensures smoother and more responsive acceleration, enhancing your driving experience. With a standard center electrode design, short projection, and flat seat type, these spark plugs are built to meet regular-grade requirements while delivering exceptional performance.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
Good Fuel Economy: Designed to optimize fuel combustion, these spark plugs help improve your vehicle’s fuel efficiency, saving you money at the pump.
Smooth Acceleration: Experience smoother and more responsive acceleration with the advanced engineering of Autolite Copper Spark Plugs.
Smooth Acceleration: Experience smoother and more responsive acceleration with the advanced engineering of Autolite Copper Spark Plugs.

from

$1.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system or operating system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$41.49

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$323.99

Black; 7in. Small Bl

from

$118.99

For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions.

Product Features:

PerTronix 11830 Module replacement (only) (one module) for 1183 Ignitor Kit
Replacement Parts (only) for Ignitor and Ignitor II Kits

from

$3.29

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Fel-Pro Oil Pan SnapUps 8mm bolts
Designed to hold up the pan and gasket, for one person installation
Engine$aver Hardware
Unsurpassed quality you can trust
Sold in sets of four and are reusable

Chevrolet Two-Ten Series Ignition and Tune-Up Products

Top Chevrolet Two-Ten Series Ignition and Tune-Up Products Categories

Essential Chevrolet Two-Ten Series Ignition and Tune-Up Products

Carquest Premium – Distributor Rotor (Part No.DAA1025)

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6326)

ACDelco – Ignition Capacitor (Part No.D203)

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6188)

Edelbrock – Distributor Clamp No. 4802 For 4.3L V6 And Small-Block And Big-Block V8 Chevrolet (Part No.4802)

Accel – 7Mm Super Stock Copper Uni (Part No.3008)

MSD Ignition – Oil Plug; Wet Sump; Chevy V8 (Part No.8513)

Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

PerTronix – D600700 Cap Black And Rotor 8 Cylinder Flame-Thrower Billet Distributor (Part No.D600700)

PerTronix – D701700 Vacuum Canister For Flame-Thrower Billet Distributor (Part No.D701700)

Dorman – Help – Spark Plug Non-Foulers – 14mm Gasket Seat (Part No.42000)

Carquest Premium – Ignition Contact Set (Part No.AMA1057)

PerTronix – 808480 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 180 Degree Red (Part No.808480)

MSD Ignition – Super HEI Kit with Digital 6AL; Blaster SS Coil; HEI Adapter and 8.5mm Coil Wire (Part No.85001)

MSD Ignition – Distributors (Part No.83613)

Edelbrock – Distributor Drive Gear For Sb And Bb Chevy With 0.500" Diameter Shaft (Part No.22737)

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.303)

Carquest Premium – Distributor Primary Lead Wire (Part No.DLA1834)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

MSD Ignition – Black; 7in. Small Bl (Part No.86113)

PerTronix – 11830 Module replacement (only) (one module) for 1183 Ignitor Kit (Part No.11830)

Felpro – Distributor Mounting Gasket (Part No.70194)

Chevrolet Two-Ten Series Ignition and Tune-Up Products Categories

Helping You Find the Right Ignition and Tune-Up Products for Your Chevrolet Two-Ten Series

Top Ignition and Tune-Up Products Brands for Your Chevrolet Two-Ten Series

Top-Rated ACDelco Ignition and Tune-Up Products

Leading ACDelco Ignition and Tune-Up Products

FAQs for Chevrolet Two-Ten Series Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the Chevrolet Two-Ten Series?

What are the top-rated Chevrolet Two-Ten Series Ignition and Tune-Up Products?

Find Your Chevrolet Two-Ten Series Ignition and Tune-Up Products by Year

More Popular Parts for All Makes