Chevrolet Truck Brake Parts

Essential Chevrolet Truck Brake Parts

Carquest Wearever – Brake Drum Meets or Exceeds OE Specs (Part No.YH140023)

Brake Drum Meets or Exceeds OE Specs

from

$62.99
Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
  • Proper harmonic design and balance helps to reduce brake noise and vibration
  • Optimal metallurgy and casting thickness to preventing warping
See More

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

Wearever – Hydro-Vac Brake Booster: Without Master Cylinder (Part No.51-8028)

Hydro-Vac Brake Booster: Without Master Cylinder

from

$285.99
CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:
  • 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
  • Exclusive rust-prohibitive finishing process extends unit life.
  • Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
  • All units are 100% tested to ensure reliable performance.
  • Guaranteed fit and function.
See More

Carquest Wearever – Brake Shoes (Part No.S310)

Brake Shoes

from

$43.49
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Wearever – Brake Shoes (Part No.S228)

Brake Shoes

from

$35.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA4497)

Brake Hose Assembly: Copper Washers Included

from

$21.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Wearever – Brake Hose Assembly (Part No.BHA13841)

Brake Hose Assembly

from

$21.99
This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:
  • Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
  • Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
  • Quality assured – materials tested to exacting government-regulated safety and durability standards
  • Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
  • Brand may vary by location
See More

Carquest Wearever – Brake Shoes (Part No.S9)

Brake Shoes

from

$34.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design. 
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Carquest Wearever – Wheel Cylinder (Part No.WCA18010)

Wheel Cylinder

from

$76.99
This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:
  • Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
  • Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
  • Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
  • Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups
See More

Wearever – Master Cylinder (Part No.10-57582)

Master Cylinder

from

$201.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Carquest Wearever – New Brake Master Cylinder: With Reservoir, Exact Fit, 1.25" Bore (Part No.MCA9220)

New Brake Master Cylinder: With Reservoir, Exact Fit, 1.25" Bore

from

$259.99
This brake master cylinder is precision-engineered to match the design, function, and performance of the original master cylinder on specific vehicle years, makes and models. It is made of new, high-quality materials for a safe, durable replacement.

Product Features:
  • Precise replacement – cylinder housing is constructed to match the casting material of the original part and ensure similar performance
  • Durable design – all rubber components are made of high-quality EPDM compound for resistance to glycol-based brake fluid
  • 100% new – made entirely of new materials, not remanufactured, to ensure highest quality and safety
  • Strict specifications – made to meet rigorous SAE International standards
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-34404)

Remanufactured Brake Master Cylinder

from

$49.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-16714)

Remanufactured Brake Master Cylinder

from

$75.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.10-57581)

Remanufactured Brake Master Cylinder

from

$131.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

Helping You Find the Right Brake Parts for Your Chevrolet Truck

You love your Truck. So we’ve made it easier than ever to help you find Chevrolet Truck Brake Parts in our online catalog. Our inventory holds 14 aftermarket and OEM Brake Parts for your Chevrolet Truck, ranging from $15.99 to $285.99.

We offer parts from 3 brands trusted to make quality Brake Parts for your Chevrolet Truck. Before you buy, take some time to read through customer reviews. We currently have 6,136 reviews of Chevrolet Truck Brake Parts from previous customers.

Find your Truck Brake Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet Truck part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Brake Parts Brands for Your Chevrolet Truck

Our inventory holds Brake Parts for your Chevrolet Truck from 3 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest, Cardone, and Wearever, all of which can keep that Chevrolet happy.
We have Cardone parts available for your Chevrolet Truck in categories like Brake Master Cylinders. Some of the top-rated Cardone parts in these categories are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders

Top-Rated Carquest Wearever Brake Parts

Leading Carquest Wearever Brake Parts

We carry Carquest Wearever brand parts for your Chevrolet Truck across several catalog categories, including Brake Pads and Shoes. Some of our most reviewed Carquest Wearever parts include:
Brake Shoes
from $35.99
(17)
Brake Shoes
Rear Brake Pads and Shoes
Brake Shoes
from $34.99
(9)
Brake Shoes
Front Brake Pads and Shoes
Brake Drum Meets or Exceeds OE Specs
from $62.99
(4)
Brake Drum Meets or Exceeds OE Specs
Rear Brake Drums

FAQs for Chevrolet Truck Brake Parts

What are the most purchased Brake Parts for the Chevrolet Truck?

Out of 14 Brake Parts for the Chevrolet Truck, the most popular in our inventory are:
Brake Hose Assembly
from $21.99
(3)
Brake Hose Assembly
Brake Hoses
Brake Hose Assembly: Copper Washers Included
from $21.99
This product is not rated
Brake Hose Assembly: Copper Washers Included
Brake Hoses
Brake Shoes
from $43.49
This product is not rated
Brake Shoes
Rear Brake Pads and Shoes