Chevrolet T6500 Belts and Hoses

Essential Chevrolet T6500 Belts and Hoses

Dayco – V-Belt, Top Cog, Dayco (Part No.17340)

V-Belt, Top Cog, Dayco

from

$13.49
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Driveworks – Automotive V-Belt (Part No.33517)

Automotive V-Belt

from

$6.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89431)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$102.99
For heavy-duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the pat

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.910547A)

Serpentine Belt Tensioner: 1 Piece

from

$162.99
This Heavy Duty Truck and Bus tensioner is designed and engineered by one of the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Includes a new mounting bolt for ease of installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Gates – Premium Modular Coolant Hose (Part No.22856)

Premium Modular Coolant Hose

from

$88.99
Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation + the leading cause of hose failure
  • EPDM tube; synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.50" Diameter (Part No.E72122)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.50" Diameter

from

$17.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.56" Diameter (Part No.D72029)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.56" Diameter

from

$23.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 39.25mm Width, Smooth (Part No.89101)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 39.25mm Width, Smooth

from

$44.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 32.8mm Width, Smooth (Part No.89105)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 32.8mm Width, Smooth

from

$45.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Driveworks – Poly Rib Belt Serpentine Belt; 67 Long, 6 Rib Count (Part No.670K6)

Poly Rib Belt Serpentine Belt; 67 Long, 6 Rib Count

from

$20.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 55.843" Long, 7 Rib Count, Exact Fit (Part No.K070553HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 55.843" Long, 7 Rib Count, Exact Fit

from

$88.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K080726)

Micro-V« Serpentine Drive Belt

from

$76.99
We are proud to offer this CARQUEST product line: CARQUEST Premium Serpentine Belts By Gates

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 73.25" Long, 8 Rib Count, Exact Fit (Part No.K080726HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 73.25" Long, 8 Rib Count, Exact Fit

from

$95.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 74 mm Diameter (Part No.900120A)

O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 74 mm Diameter

from

$41.99
This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance
  • Forged Heavy Duty Steel Pulley designed to displace bearing heat. Precision machined face for smooth running surface. Tandem 6303 Ball Bearings for extended life.
  • Installation instructions included.
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 86.5mm Dia., 39.4mm Width, Smooth (Part No.89106)

Serpentine Idler/Tensioner Pulley; Steel, 86.5mm Dia., 39.4mm Width, Smooth

from

$57.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.75" Long, 1.28" Diameter (Part No.E72124)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.75" Long, 1.28" Diameter

from

$13.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Helping You Find the Right Belts and Hoses for Your Chevrolet T6500

You love your T6500. So we’ve made it easier than ever to help you find Chevrolet T6500 Belts and Hoses in our online catalog. Our inventory holds 45 aftermarket and OEM Belts and Hoses for your Chevrolet T6500, ranging from $4.99 to $203.99.

We offer parts from 4 brands trusted to make quality Belts and Hoses for your Chevrolet T6500. Before you buy, take some time to read through customer reviews. We currently have 7,673 reviews of Chevrolet T6500 Belts and Hoses from previous customers. Some of the top rated parts include Automotive V-Belt, Driveworks with 5.0 stars and Poly Rib Belt HD Serpentine Belt; 72.5 Long, 8 Rib Count, Heavy Duty with 5.0 stars.

Find your T6500 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Chevrolet T6500 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your Chevrolet T6500

Our inventory holds Belts and Hoses for your Chevrolet T6500 from 4 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Driveworks, and Gates, all of which can keep that Chevrolet happy.
We have Litens parts available for your Chevrolet T6500 in categories like Belt Tensioners. Some of the top-rated Litens parts in these categories are:
Serpentine Belt Tensioner: 1 Piece
from $203.99
(690)
Serpentine Belt Tensioner: 1 Piece
Belt Tensioner Assemblies

FAQs for Chevrolet T6500 Belts and Hoses

What are the most purchased Belts and Hoses for the Chevrolet T6500?

Out of 45 Belts and Hoses for the Chevrolet T6500, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 67 Long, 6 Rib Count
from $20.99
(3)
Poly Rib Belt Serpentine Belt; 67 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 67 Long, 6 Rib Count
from $33.49
(5)
Poly Rib Belt Serpentine Belt; 67 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 68 Long, 7 Rib Count
from $31.99
(2)
Poly Rib Belt Serpentine Belt; 68 Long, 7 Rib Count
Serpentine Belts

What are the top-rated Chevrolet T6500 Belts and Hoses?

Top-rated Belts and Hoses for your Chevrolet T6500 based on customer reviews/ratings are:
Automotive V-Belt, Driveworks
from $5.49
(4)
Automotive V-Belt, Driveworks
“Good quality like oem”
Poly Rib Belt HD Serpentine Belt; 72.5 Long, 8 Rib Count, Heavy Duty
from $65.99
(2)
Poly Rib Belt HD Serpentine Belt; 72.5 Long, 8 Rib Count, Heavy Duty
“It is for a CAT 420F 2018”
Automotive V-Belt
from $6.29
(2)
Automotive V-Belt
“Great product for the price”