Chevrolet Suburban 2500 Exterior Lighting

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

LED lights will make your vehicle more visible to other drivers, increasing your driving safety, and the cleaner, brighter light is much more attractive. they are also economical: they use much less power than incandescent bulbs and burn longer and cooler.

Product Features:

• These Bulbs Utilize The Original Lighting Fixture and would not Damage Any Part Of Your Cars Lighting
• Super Low Power Consumption
• High Power LEDs
• Brightest LED Bulb On The Market
• Features New Flat LED Technology

SYLVANIA Long Life miniature bulbs provide standard performance for your car or truck’s interior and exterior auxiliary lighting. Ideal for use in your car’s back up/reverse, trunk, dome lights and more, Long Life bulbs are a direct replacement for your vehicle. Designed for durability, lower maintenance, and safety in mind.

Product Features:

• DEPENDABLE: Made from high quality materials for long-lasting durability
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
• SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
• PRO TIP: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install
• SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

All lighting sockets and accessories are direct replacements for the original unit per vehicle application for ease of installation. Follow all electrical repair procedures for a quality repair where applicable.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

Need a new third brake light assembly that looks, fits and performs like the original, without the hassle of going back to the dealership? This replacement was reverse-engineered to match the stock center high mount stop light on specific vehicles.

Product Features:

• Ideal replacement – this third brake light assembly was specifically designed to look and function like the original light on specific vehicles
• Quality construction – made from quality materials for excellent visibility and illumination
• Trustworthy design – backed by team of engineers and specialists in the United States
• Thoroughly tested – this part has undergone extensive testing to help ensure a secure fit and long service life

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Premium Replacement Driver Side Fog Light Assembly. It is Designed to Replace Your Existing Fog Light Assembly. Check to Be Sure It Fits Your Vehicle.

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

All lighting sockets and accessories are direct replacements for the original unit per vehicle application for ease of installation. Follow all electrical repair procedures for a quality repair where applicable.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

This line of LED bulbs is made of quality materials to provide truer color and increased light output and visibility. These direct replacement bulbs restore appearance and safety.

Product Features:

• Direct replacement – this line of LED bulbs restores the appearance and safety of the original bulbs on specific vehicles
• Corrosion resistant – bulb base features standard corrosion inhibitor
• Restores appearance – looks and function like original bulb to maintain look
• Safety tested – undergone rigorous testing for conformance to product standards and quality assurance

All lighting sockets and accessories are direct replacements for the original unit per vehicle application for ease of installation. Follow all electrical repair procedures for a quality repair where applicable.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The Spyder Auto Group products are guaranteed to not only light up any road during twilight hours but also during the harshest conditions: rain, sleet, snow, or fog proves to be no match for the brilliance of Spyder Auto. Our high quality LEDs which are provided by Philips Lumiled the leading LED manufacturer will be sure to get you to your destination not only safely, but also in style. Strenuous testing is put on all of our products to ensure they are up to the codes set by both the DOT (Department of Transportation) and SAE (Society of Automotive Engineers), as well as certified with FMVSS code no. 108 and ISO 9000 and ISO 9002.

Product Features:

• Increases Visibility During Heavy Rain, Snow, Fog And Night Time Driving
• Made By An OE Approved And ISO Certified Manufacturers
• Premium Quality And Dependable Performance Whatever The Road Throws At You
• Designed As Direct Bolt On Replacement Parts

Dorman’s Socket Assemblies are engineered with extra-long leads and multiple butt connectors.

Product Features:

• No special tools required for installation
• Easy to install
• Manufactured to strict engineering quality standards
• Constructed of high-quality materials for long-lasting durability

Upgrade your vehicle with SYLVANIA ZEVO® LED miniature bulbs for added style, performance, and the many benefits of LEDs. Instantly enhance the interior and exterior lighting applications of your vehicle with a modern bright white light for head-turning style and increased visibility by other motorists. Easy-to-install with a robust design and high-quality components, SYLVANIA ZEVO replacement bulbs are backed by a limited warranty to provide exceptional performance through the life of the vehicle. Also available in an array of colors to update your car or truck.

Product Features:

• HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
• RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
• NON-POLARITY DESIGN: Plug & play easy installation; SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction
• INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
• BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
• HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
• SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color.
• SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application.
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

SYLVANIA Long Life miniature bulbs provide standard performance for your car or truck’s interior and exterior auxiliary lighting. Ideal for use in your car’s back up/reverse, trunk, dome lights and more, Long Life bulbs are a direct replacement for your vehicle. Designed for durability, lower maintenance, and safety in mind.

Product Features:

• DEPENDABLE: Made from high quality materials for long-lasting durability
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
• SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
• PRO TIP: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install
• SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

Putcos F1 is a value priced LED bulb kit with features superior to similarly priced competitors. F1 offers a new innovative COB LED, a miniaturized driver, and the #1 thermal solution available.

Product Features:

• Lumens 1500 Per Bulb
• With IP65 Rating For Water Resistance and A Solid State Design, Failure Rate Is Minimal Versus Other Value Priced Options
• Patented Flexible Heat Sink Made From Aluminum For Temperature Control and Ease Of Installation
• Intelligent Led Headlight Bulb With Putcos Patented Flexible Heat Sink Made From Aluminum For Temperature Control and Ease Of Installation

LED lights will make your vehicle more visible to other drivers, increasing your driving safety, and the cleaner, brighter light is much more attractive.

Product Features:

• These Bulbs Utilize The Original Lighting Fixture And would not Damage Any Part Of Your Cars Lighting
• Super Low Power Consumption
• Unrivaled Plug And Play Performance
• Dual Polarity For Ease Of Installation

GM Genuine Parts Multi Purpose Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These switches open and close an electrical circuit on your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Opens and closes an electrical circuit
• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies
• Collision parts are designed to help promote proper and safe repair

All lighting sockets and accessories are direct replacements for the original unit per vehicle application for ease of installation. Follow all electrical repair procedures for a quality repair where applicable.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

The SYLVANIA SilverStar® high performance miniature bulbs deliver a brighter, whiter light when compared to SYLVANIA Long Life. SYLVANIA achieves this using a specially designed filament, propriety gas mixture and a lamp coating that shifts the color temperature towards a whiter light. A brighter light can improve visibility in your interior lighting applications and increase your visibility to other drivers when braking or turning.

Product Features:

• BRIGHTER: A specially designed filament and proprietary halogen gas mixture produces a brighter light
• WHITER LIGHT: Blue ceramic coating technology provides a whiter light
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required. Best performance in a clear lens
• SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
• PRO TIP: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install
• SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

ACDelco GM Original Equipment Socket Assemblies securely hold interior and exterior light bulbs and provide the electrical connection required to operate the bulb, and are GM-recommended replacements for your vehicle’s original components. These original equipment socket assemblies have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Provides connection for light bulb contacts to operate bulb
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Powerful set of beams to pierce through dense fog, and old school halogens just do not have the intensity to handle the job. Retire those dull bulbs and replace them with a cutting edge set of Putco Optic 360 Degree LED Fog Lamp Bulbs.

Product Features:

• High Power LED Fog Lamp Bulbs
• High Power 30 Watt Cree LEDs
• 360 Degree Lamp Angle
• Over 800 Lumens Per Kit
• 6000K Color Temperature
• Machined CNC Billet Aluminum With Optic Lens
• 50,000+ Hours LED Lifetime

AnzoUSA offers the best quality performance Lighting products at the lowest cost. All AnzoUSA products are SAE (Society Automotive Engineers) and D.O.T. (Department Of Transportation) compliant to FMVSS NO. 108 Federal motor vehicle safety standards and manufactured in a state of the art ISO 9002 and QS 9000 Quality certified factory. In order to ensure perfection, we rigorously test every AnzoUSA Lighting product in a thermo hygrometer temperature and humidity chamber and rain resistant tester. As well as thoroughly exposing all of our products to intense photometric testing to guarantee strict compliance with local, state, Federal and International standards. All of our Lighting products are designed using CAD or CAM computerized equipment and these modern designs are then tested using a 3 Dimensional Testing Machine to insure precision and accuracy in the research, development and design of our molds. Every AnzoUSA(TM) product is backed by a One Year Warranty against manufacturer defects. With over three decades of professional manufacturing experience and with ISO 9002 and German T.U.V Quality Certification, AnzoUSA(TM) has made itself a powerful competitor and leading brand in the world market

Product Features:

• Clear Corner And Bumper Lenses Easily Replace Your Factory Amber Lenses For Hi-Tect Euro Style That Will Get Your Vehicle Noticed
• Adds Clean, Modern Euro Style To Your Front End
• Looks Dramatically Better Than Stock Lenses
• Provides A Great Match For Projector Or Clear Headlights
• Easy To Install Directly Replaces Factory Lenses

Upgrade your vehicle with ZEVO® LED miniature bulbs for added style, performance, and the many benefits of LEDs. Instantly enhance the interior and exterior lighting applications of your vehicle with a modern bright white light for head-turning style and increased visibility by other motorists. Easy-to-install with a robust design and high-quality components, ZEVO replacement bulbs are backed by a limited warranty to provide exceptional performance through the life of the vehicle. Also available in an array of colors to update your car or truck.

Product Features:

• HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
• RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
• NON-POLARITY DESIGN: Plug & play easy installation; SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction
• INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
• BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
• HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
• SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color.
• SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application.
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

SYLVANIA SilverStar zXe® Gold are the whitest halogen headlight bulbs offered in our premium halogen collection. SilverStar zXe Gold bulbs are made to turn heads with its premier style. SYLVANIA’s proprietary Xenon halogen gas technology paired with a cobalt blue coating delivers a crisp white light that transforms the look of your car’s low and high beam headlights without compromising on safety.

Product Features:

• WHITER LIGHT: Proprietary Xenon halogen gas technology and cobalt blue coating with laser-ablation delivers a crisp, white light for premier style
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
• SMART MAINTENANCE: Headlights dim over time, always replace bulbs in pairs to ensure equal brightness and color
• PRO TIP: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install
• SAFETY: Compliant with DOT regulations and SAE standards, SYLVANIA headlight bulbs are designed with safety in mind to prevent glare
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

The Nitro Lux (R) headlight kit is the best choice for any application. Anything from a low beam, high beam, projectors, to fog lights. This headlight kit provides the same cool white color temperature that our previous generations offered with many new updated features to nearly every aspect of the headlight kit. The Nitro Lux kit is the culmination of all the experience and technology learned from previous generations of LED headlight kits wrapped into one new cutting edge bulb.

Product Features:

• CSP LED: 6500 Kelvin Temperature, 5000 Lumen Powerful Bulb Ever Designed For Maximum Down Road Punch
• High Spec Tower: Fully Anodized Non Reflective Nickel Finish To Eliminate Light Ray Interface Inside Lamp
• Easy Clock Collar: New Built In Collar Design Allows For Quick And Easy Adjustment Of Light Beam
• Exclusive Patented Heat Sink: Exclusive Solid State Design For Maximum Performance, Long Life, And Superior Scientifically Proven Heat Mitigation
• Anti Flicker Driver Box: Tough Seal Advanced Polymer, 100 Percent Waterproof, New Miniature Capacitors Eliminate External Anti Flicker Module: Reduces Size Of Driver Box By 80 Percent
• Nylon Braided Sleeve: Braided From Polyethylene Terephthalate Monofilament Fibers: Abrasion Resistant Sleeving: Material Has A Wide Operating Temperature Range, Resistant To UV Radiation
• 20 Millimeter Heat Sink Depth: New Nitro Lux Led Is Even Slimmer With An Industry Leading Footprint To Fit Into Modern Headlamps Minimal Housing Space
• Precision Terminal Systems: 100 Percent Water And Dust Proof: Twist Lock And Slide Pressure Locks For OEM Guarantee Flawless Contact Points: Perfect Fitments With Existing OEM Harness