Chevrolet Silverado 1500 Trunk and Tailgate Parts

The edge of a pickup tailgate has a hard time. No other part of the truck is so prone to scratches and abuse. The Wade Tailgate Cap installs easily with 3M tape and keeps the tailgate rail in shape.

Product Features:

• Protects Bed Rails against Damage
• Gives Vehicle A Finished Factory Look
• Installs Quickly And Easily With 3M Tape
• Matching Bed Caps Available
• Manufactured With High Impact ABS

Dee Zee Red Label Chest is the perfect solution. Constructed of heavy duty Brite-Tread aluminum it can take a serious amount of abuse. A crown style lid with a full pan double-V stiffener offers superior rigidity for whatever you decide throw at it. Lockable stainless steel paddle handles keep your items safe and secure from the types of people your mother warned you about. Dampened gas shocks and adjustable strikers keep lid operation smooth and effortless. What good is a utility chest if it turns into a kiddie pool every time it rains. that is why we fortify our Red Label Series with closed cell foam gasket to keep outside elements where they belong. Our Red Label Utility Chest is forged out of non-rusting .056 Brite-Tread aluminum using internal bends for superior strength to create a box that can withstand years of abuse.

Product Features:

• Paddle Handles With Guide Plate- Lockable, Stainless Steel Handles
• Lockable Stainless Steel Paddle Handle Latch
• Slanted Front To Avoid The Wheel Wells Or Traditional Square
• Closed Cell Foam Gaskets- Helps Keep The Elements Out Of The Box
• Front, Back, And Bottom All One Piece For Increased Body Strength
• Dampened Gas Shocks Open At A Steady, Controlled Rate And Removable Plastic Tool Tray To Keep Smaller Items Organized
• Full Length Piano Hinge For Extra Strength
• Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

GM Genuine Parts Door Lock Actuator Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These kits come with the components to replace your door lock actuator. The door lock actuator is an electrically operated linear motor that operates the door lock mechanism within the vehicle doors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

• Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
• GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

This tailgate stop bumper is designed to match the fit, appearance and function of the original bumper on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this tailgate stop bumper is designed to match the fit, appearance and function of the original bumper on specified vehicles
• Restores functionality – reliable replacement for an original bumper that is missing or has failed due to internal clip breakage
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

New Standard Replacement Upper Tailgate Molding, Base And Sl Fleetside Models, Black Textured, Without Bolt Holes Showing

Product Features:

• Base And Sl Fleetside Models, Black Textured, Without Bolt Holes Showing, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This tailgate support cable matches the fit and function of the original cables on specific vehicles. Made of quality materials, this durable cable is engineered to stabilize the tailgate over the long haul.

Product Features:

• Direct replacement – this tailgate support cable fits specific vehicles to preserve tailgate stability
• Durable construction – this part is made of quality materials for a long service life
• Saves money – offers quality at a competitive price while preventing tailgate damage
• Quality assured – this tailgate support cable has undergone virtual testing for fit, function and durability over time

Rampage LED Tailgate Light Bar – Superbrite LED light bar from Rampage has been designed and manufactured to expand overall life expectancy with the introduction of a waterproof, fully sealed electrical system. This innovative Light Bar is brighter and lasts longer due to the development of a waterproof, fully sealed electrical system. The completely encapsulated circuit board with robotically assembled high intensity LED bulbs is encased in a rigid, injection molded cap while suspended in a UV stabilized clear urethane, creating a seamless, completely waterproof Tailgate Bar. The Rampage Truck, Mini Truck and SUV Tailgate light bar is designed to fill the recessed space between the tailgate and bumper, and is easily installed (without drilling) using durable 3M automotive grade adhesive foam tape, heavy gauge wiring with plug-in flat four hitch connector to quickly plug into existing trailer hitch. Includes fuse protection, long life superbrite LED bulbs for Brighter faster lighting response. Waterproof, high quality SMT technology circuit board, attaches to vehicle with 3M adhesive foam tape.

Product Features:

• Six Function Superbright LED Bar
• L/R Turn Signals
• Flasher/Running Lights
• Waterproof Completely Encased Electrical System
• UV Stabilized Rigid Urethane Injected Molded Cap
• Heavy Gauge Wiring With OEM 4 Plug Connector
• Robotically Assembled LED Circuit In 49-Inch Bar
• Universal Fit And Mounting With OEM 3M Tape
• Long Life Super Bright LED Bulbs

This tailgate striker bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this tailgate striker bolt matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

New Standard Replacement Passenger Side Tailgate Check Cable

Product Features:

• Made Of Metal and Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Prone is a high performance tailgate net that adds a sporty aerodynamic style to your truck and increases air flow through your truck bed. Prune’s are known to improve gas mileage by eliminating wind drag. Easily installs with four mounting holes, resulting in a perfectly flat, sag-free net. Complements and fits most pickups. Constructed from heavy duty 22 oz vinyl-coated polyester fabric with stainless steel mounting hardware for long lasting durability.

Product Features:

• The Leader In Quality & Fit & Finish
• Patented Sag-free Design
• Only Four Holes Needed for Installation
• Best Looking Even-Tensioning Design
• Available In Four Styles
• 18 in height x 59.75 in width US Flag

Westins Truck Bed Mat is designed to line and protect your trucks bed from damage typically caused by direct contact with cargo. Custom Fit Tailgate Mat is heat molded for specific vehicle applications and are available for short bed and long bed trucks. Tailgate Mat is made in the USA of 100% recycled heavy weight rubber and feature a ribbed non-slip surface to help keep cargo in its place.

Product Features:

• Preserves Truck Value
• Heavyweight Rubber
• Ribbed; Non Slip Surface
• Easy To Install
• 100 Percent Recycled Rubber
• Made In The USA

This tailgate molding is designed to match the fit, function and appearance of the original molding on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this tailgate molding is designed to match the fit, function and appearance of the original molding on specified vehicles
• Restores functionality – reliable replacement for an original molding that is missing, faded, cracked or damaged
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This tailgate molding is designed to match the fit, function and appearance of the original molding on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this tailgate molding is designed to match the fit, function and appearance of the original molding on specified vehicles
• Restores functionality – reliable replacement for an original molding that is missing, faded, cracked or damaged
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This tailgate hinge kit is designed to match the original parts required to restore proper tailgate alignment and function on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this tailgate hinge kit is designed to match the original parts required to restore proper tailgate alignment and function on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This tailgate hinge bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance..

Product Features:

• Direct replacement – this tailgate hinge bushing matches the fit and function of the factory part on specified years, makes and models.
• Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Emblems are cut from a durable high-quality stainless steel are in 2 finishes for a great look and long-lasting durability. An easy peel and stick application with pre-applied 3M (TM) automotive tape allows you to install these emblems in minutes. Our emblems have been officially licensed by Ford and GM, and will fit perfectly in the factory lettering channels for a fantastic fit and finish.

Product Features:

• Made Of High Quality Stainless Steel And Black Platinum Stainless Steel
• For Inside The Factory Lettering Channels Perfectly
• Show Off Your Style With Our Chevrolet Lettering Emblems
• Installs Easily With Pre-Applied Red 3M (TM) Tape, Simple Peel And Stick

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This tailgate kit includes the fasteners and hardware required to repair certain areas of the tailgate on specified vehicles. The components in this kit are made of durable materials for reliable service.

Product Features:

• Convenient solution – this tailgate kit includes the components and hardware to repair certain areas of the tailgate on specified vehicles
• Ideal replacement – this all-in-one kit replaces failed or missing original components
• Durable components – the hardware in this kit is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Our Canister Purge valves meet or exceed original equipment specifications, providing confidence in every box
• Featuring industrial grade materials for robust performance
• Decades of industry leading research and development focused on meeting the technician’s needs
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product